OK rebooted into kernel-2.6.8-1.521 from kernel-2.6.7-1.494.2.2 and as
root this works:
[root@help root]# cdrecord -v -scanbus dev=ATAPI
Cdrecord-Clone 2.01a27-dvd (i686-pc-linux-gnu) Copyright (C) 1995-2004
Jörg Schilling
Note: This version is an unofficial (modified) version with DVD support
Note: and therefore may have bugs that are not present in the original.
Note: Please send bug reports or support requests to <warly@xxxxxxxxxxxxxxxx>.
Note: The author of cdrecord should not be bothered with problems in
this version.
TOC Type: 1 = CD-ROM
scsidev: 'ATAPI'
devname: 'ATAPI'
scsibus: -2 target: -2 lun: -2
Warning: Using ATA Packet interface.
Warning: The related libscg interface code is in pre alpha.
Warning: There may be fatal problems.
Using libscg version 'schily-0.8'.
SCSI buffer size: 64512
scsibus0:
cdrecord: Warning: controller returns wrong size for CD capabilities page.
0,0,0 0) 'LITEON ' 'CD-ROM LTN486S ' 'YKS4' Removable CD-ROM
0,1,0 1) 'LITE-ON ' 'LTR-24102B ' '5S07' Removable CD-ROM
0,2,0 2) *
0,3,0 3) *
0,4,0 4) *
0,5,0 5) *
0,6,0 6) *
0,7,0 7) *
So I edited /etc/cdrecord.conf to read:
CDR_DEVICE=LITEON
CDR_FIFOSIZE=4m
LITEON= ATA:0,1,0 -1 -1 burnfree
And then did:
[root@help root]# cdrecord -v FC2-i386-rescuecd.iso
cdrecord: No write mode specified.
cdrecord: Asuming -tao mode.
cdrecord: Future versions of cdrecord may have different drive
dependent defaults.
cdrecord: Continuing in 5 seconds...
Cdrecord-Clone 2.01a27-dvd (i686-pc-linux-gnu) Copyright (C) 1995-2004
Jörg Schilling
Note: This version is an unofficial (modified) version with DVD support
Note: and therefore may have bugs that are not present in the original.
Note: Please send bug reports or support requests to <warly@xxxxxxxxxxxxxxxx>.
Note: The author of cdrecord should not be bothered with problems in
this version.
TOC Type: 1 = CD-ROM
scsidev: 'ATA:0,1,0'
devname: 'ATA'
scsibus: 0 target: 1 lun: 0
Warning: Using badly designed ATAPI via /dev/hd* interface.
Linux sg driver version: 3.5.27
cdrecord: No such file or directory. Cannot open '/dev/hd*'. Cannot
open SCSI driver.
cdrecord: For possible targets try 'cdrecord -scanbus'. Make sure you are root.
cdrecord: For possible transport specifiers try 'cdrecord dev=help'.
Where does that take us now?
Pybe
PS: Thanks for all your help so far.
