Re: NVIDIA 6111 driver and console mode

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Le ven 17/09/2004 Ã 15:22, Wolfgang a Ãcrit :
> On Fri, 2004-09-17 at 20:43, Eric Tanguy wrote:
> > Le ven 17/09/2004 Ã 12:12, Alexander Dalloz a Ãcrit :
> > > Am Fr, den 17.09.2004 schrieb eric tanguy um 10:46:
> > > 
> > > > Is it because using rhgb make console in other mode than standard one and
> > > > then switching between X and console make the nvidia driver lost in tv
> > > > mode ?
> > > > Eric
> > > 
> > > From your initial posting in this thread I did understand you in a way,
> > > that the bootup process does not make any problems. As you now mentions
> > > RHGB I assume you boot with rhgb enabled. At that time the NVidia driver
> > > is not already loaded. You described problem does not sound like you
> > > have a problem with the frame buffer mode along with the NVidia driver
> > > but running TV output without any monitor attached. So set in the
> > > /etc/X11/xorg.conf
> > > 
> > > Option  "IgnoreDisplayDevices"  "Crt"
> > > 
> > > in the Section "Device" where the nvidia driver is configured. I bet
> > > your problem is gone then after restarting X.
> > > 
> > > Alexander
> > > 
> > Thanks for your answer. You're right my xorg.conf is configure in
> > twinview clone mode with CRT and TV. When the 2 are connected no
> > problem. When i switch from X to console i have only the console on the
> > monitor. But when i have only the TV plugged in, the first console is on
> > the TV but after launching X when i want to switch to console (alt ctrl
> > FX) the image on the TV is completely flickered. The same if i stop X. I
> > have to modify my xorg.conf for the case i have only TV plugged in ? Or
> > can i have a xorg.conf good for the 2 configurations : CRT+TV, TV only ?
> > Eric
> 
> Ahhh Haaa, that explains your problem. You never mentioned that you were
> using twinview mode!. As the symptoms are similar to one trying to use
> both Console Framebuffer and the Nvidia driver at the same time. And
> from what I've read on the Nvidia forums, that simply will not work.
> 
> Good to see you got it going now.
> 
> Wolf
> 
> 
So how to disable Console Framebuffer ?
Eric

Attachment: signature.asc
Description: Ceci est une partie de message =?ISO-8859-1?Q?num=E9riquement?= =?ISO-8859-1?Q?_sign=E9e=2E?=


[Index of Archives]     [Current Fedora Users]     [Fedora Desktop]     [Fedora SELinux]     [Yosemite News]     [Yosemite Photos]     [KDE Users]     [Fedora Tools]     [Fedora Docs]

  Powered by Linux