Le ven 17/09/2004 Ã 12:12, Alexander Dalloz a Ãcrit : > Am Fr, den 17.09.2004 schrieb eric tanguy um 10:46: > > > Is it because using rhgb make console in other mode than standard one and > > then switching between X and console make the nvidia driver lost in tv > > mode ? > > Eric > > From your initial posting in this thread I did understand you in a way, > that the bootup process does not make any problems. As you now mentions > RHGB I assume you boot with rhgb enabled. At that time the NVidia driver > is not already loaded. You described problem does not sound like you > have a problem with the frame buffer mode along with the NVidia driver > but running TV output without any monitor attached. So set in the > /etc/X11/xorg.conf > > Option "IgnoreDisplayDevices" "Crt" > > in the Section "Device" where the nvidia driver is configured. I bet > your problem is gone then after restarting X. > > Alexander > Thanks for your answer. You're right my xorg.conf is configure in twinview clone mode with CRT and TV. When the 2 are connected no problem. When i switch from X to console i have only the console on the monitor. But when i have only the TV plugged in, the first console is on the TV but after launching X when i want to switch to console (alt ctrl FX) the image on the TV is completely flickered. The same if i stop X. I have to modify my xorg.conf for the case i have only TV plugged in ? Or can i have a xorg.conf good for the 2 configurations : CRT+TV, TV only ? Eric
Attachment:
signature.asc
Description: Ceci est une partie de message =?ISO-8859-1?Q?num=E9riquement?= =?ISO-8859-1?Q?_sign=E9e=2E?=
