Fedora Users — Re: aic7xx system hangs

I just checked the speed(s). The SCSI adapter that has the hard drives/RAID, all the devices are set to 80. The other SCSI adapter that controls the CD-ROM and tape drive has all the devices set to 20. Do they need to both be the same speed? Thanks, Jeremy


On Sep 10, 2004, at 1:12 PM, Hans Müller wrote:

C. Linus Hicks schrieb:
On Thu, 2004-09-09 at 14:27, Jeremy Conlin wrote:
I recently installed Fedora Core 2 on a Dell PowerEdge 2400 server that previously ran Red Hat 9. The installation appears to proceed normally. The problem is it never boots entirely. It hangs with the following as the last message (after removing quiet mode):
Loading sd_mod.ko module
Loading aic7xxx.ko module
Are you saying the installer is hanging, or that the install completed
but now it won't boot the installed kernel?
try to reduce the spedd of the diveces in the controller bios. I have the same problem with a tape drive. After set the speed from 160 to 80. it works.
--
fedora-list mailing list
fedora-list@xxxxxxxxxx
To unsubscribe: http://www.redhat.com/mailman/listinfo/fedora-list