On Fri, 13 Aug 2004 22:52:58 -0700 RoboticGolem <roboticgolem@xxxxxxxxx> wrote: > Well, it wont be in the reader section because it is a recorder. ... so, how am I supposed to use "copy cd" feature? =) I don't have two separate cdrom units (one burner and one reader)... > I'm > assuming you've tried to use it as a reader with k3b and it didnt > work? Exactly. > If you still cant get it to work, you could try the old > hdx=ide-scsi and try it. (dont know if fc2 comes with it built in > tho) Mmmh... I've been reading that hdx=ide-scsi is not advisable on 2.6.x kernels. So, I thought there should be some other way. > Does cdrdao or cdda-wav work manually? Yes -- well, at least, sort of: ========== cdrdao disk-info --driver generic-mmc-raw --device ATA:1,0,0 Cdrdao version 1.1.8 - (C) Andreas Mueller <andreas@xxxxxxxx> SCSI interface library - (C) Joerg Schilling Paranoia DAE library - (C) Monty Check http://cdrdao.sourceforge.net/drives.html#dt for current driver tables. Using libscg version 'schily-0.8' ATA:1,0,0: HL-DT-ST RW/DVD GCC-4521B Rev: 1.03 Using driver: Generic SCSI-3/MMC (raw writing) - Version 2.0 (options 0x0000) That data below may not reflect the real status of the inserted medium if a simulation run was performed before. Reload the medium in this case. CD-RW : no Total Capacity : n/a CD-R medium : n/a Recording Speed : n/a CD-R empty : no Toc Type : CD-DA or CD-ROM Sessions : 1 Last Track : 1 Appendable : no ========== cdrdao did not get all information from the disk (like total capacity). Still, it is reading the device: ========== cdrdao read-toc --driver generic-mmc-raw --device ATA:1,0,0 aaa Cdrdao version 1.1.8 - (C) Andreas Mueller <andreas@xxxxxxxx> SCSI interface library - (C) Joerg Schilling Paranoia DAE library - (C) Monty Check http://cdrdao.sourceforge.net/drives.html#dt for current driver tables. Using libscg version 'schily-0.8' ATA:1,0,0: HL-DT-ST RW/DVD GCC-4521B Rev: 1.03 Using driver: Generic SCSI-3/MMC (raw writing) - Version 2.0 (options 0x0000) Reading toc data... Track Mode Flags Start Length ------------------------------------------------------------ 1 DATA 4 00:00:00( 0) 68:14:54(307104) Leadout DATA 4 68:14:54(307104) PQ sub-channel reading (data track) is supported, data format is BCD. Raw P-W sub-channel reading (data track) is supported. Analyzing track 01 (MODE1): start 00:00:00, length 68:14:54... Reading of toc data finished successfully. ========== cdda2wav works just fine, and it doesn't even need extra parameters. > Have you run the k3b-setup proggy? Yes. It can't seem to correctly identify this unit's specs, though (like max recording speed etc.). xcdroast does it just fine. > Does k3b give you any messages at all on startup? Yes, it always complains it could not determine max recording speed and asks me to define it manually. Best, Andre -- Andre Oliveira da Costa
