Fedora Users — Re: Cannot install FC2

!. the CD rom iis an IDe unit
2. It is on the secondary IDE controller
3. It is on an IDE controller
4. The only thing I have you could call self booting is a game. If I have anything else I don't know what it is.
5. I tried it with my beer stein but it kept breaking the holder off so I stopped using it. However the CD has some age on it. Not sure about the speed but is not real fast.

ceubank@xxxxxxxxxxxxxxxxxxx wrote:

That would depend on whether you have the CDROM drive installed on a tertiary IDE controller (IDE2), or on a SCSI bus that you can’t normally boot from.

Is the CDROM a SCSI device?

Is the CDROM on the Primary or Secondary IDE controller?

Is the CDROM on a controller not listed in 2.?

Can you boot any other bootable CD’s from the suspect CDROM drive?

Did you use your CDROM drive as a coffee cup holder at some point? Hehehe

Good luck,

Chris

---------------

Chris Eubank

***Any opinions contained in this e-mail message are solely that of the author and do not in any way, directly or indirectly, represent my employer, real or imagined.

***Caution, *nix powered air conditioner, do not open windows!

-----Original Message-----
From: fedora-list-bounces@xxxxxxxxxx [mailto:fedora-list-bounces@xxxxxxxxxx]On Behalf Of Bill Tetens
Sent: August 12, 2004 2:34 PM
To: For users of Fedora Core releases
Subject: Re: Cannot install FC2

I forgot to answer that one. yes it is configured as the primary boot device and the hard disk is second and the floppy is third. Does the CD need any drivers or the like to read the CD?

webid@xxxxxxxxxx wrote:
On Thu, 2004-08-12 at 17:01, Bill Tetens wrote:
  
No joy in mudville.  Still had the files downloaded by bit torrent and
I burned a new disk 1 using ISO and the orginial file.  Still does not
work and I get the same error message.  
 
    
 
So did you verify in the bios that the CDrom is configured as a boot
device and listed ahead of the harddisk drive?
 
 
  
zuki269@xxxxxxxxxxxx wrote:
    
I think the problem has been found.  I burned them as data so I will
burn them as ISO files and let you know how it turns out.  Knew it
had to be something I done.  
 
Thanks everyone.....
 
webid@xxxxxxxxxx wrote:
      
On Thu, 2004-08-12 at 16:08, Bill Tetens wrote:
  
        
Totally new to Linux and am trying to install Fedora on a computer with 
a blank HDD.  I put disk one in the CD and changed the boot order 
putting the CD Rom first.  
 
The following error message is displayed after the CD appears to be checked.
 
Reboot and select proper boot device
or insert boot media in selectefd boot device.
 
The CD passed the checksum  so I am assuming that it is OK but don't 
have a clue where to go now.  I know something is wrong but what.
 
Help would be more than appreciated.
 
Thanks
    
          
Welcome aboard!
 
Most likely you need to configure your bios to boot from the CDrom
drive.  
 
The next most likely problem is that when you burned the CDs you did not
burn them as images.  In you CD burner software there should be an
option to burn the CD as an iso or image, then select the iso file you
downloaded.  This will burn a bootable CD.  If you just burned the iso
as data to the CD that will not work.
 
My money is on the bios settings.  
  
        
 
 
______________________________________________________________________
-- 
fedora-list mailing list
fedora-list@xxxxxxxxxx
To unsubscribe: http://www.redhat.com/mailman/listinfo/fedora-list
    