On Thursday 05 August 2004 18:29, Andrew wrote:
>I want gkrellm to be able to report CPU temp & fan speed just like I
>have it using hddtemp to report hard drive temps. It says no sensors
>installed, so I googled and found I need lmsensors. I downloaded the
>source for lmsensor, but then I read that it doesn't comile in 2.6
>kernels. Since I can't find any rpm file in red carpet, I tried it
>anyway and followed the instructions, downloaded 2.6 kernel-source
> and got the i686 config file, but it doesn't compile. How do I get
> lmsensors working?
Those docs are out of date and/or poorly written and organized.
lm_sensors-2.8.7 runs just fine against a 2.6.8-rc3 kernel:
root@coyote root]# sensors
w83627hf-isa-0290
Adapter: ISA adapter
VCore 1: +1.68 V (min = +1.44 V, max = +1.86 V)
VCore 2: +1.49 V (min = +1.44 V, max = +1.86 V)
+3.3V: +3.28 V (min = +2.82 V, max = +3.79 V)
+5V: +4.87 V (min = +1.75 V, max = +0.11 V) ALARM
+12V: +11.98 V (min = +0.49 V, max = +2.92 V) ALARM
-12V: -12.28 V (min = -4.14 V, max = -14.91 V) ALARM
-5V: -5.05 V (min = +0.78 V, max = -3.94 V) ALARM
V5SB: +5.62 V (min = +4.30 V, max = +6.56 V)
VBat: +3.14 V (min = +0.27 V, max = +1.30 V) ALARM
fan1: 2008 RPM (min = 659 RPM, div = 32)
fan2: 2636 RPM (min = 237 RPM, div = 32)
fan3: 0 RPM (min = 2636 RPM, div = 16) ALARM
temp1: -48°C (high = -128°C, hyst = +11°C) sensor = thermistor ALARM
temp2: +49.5°C (high = +120°C, hyst = +115°C) sensor = thermistor
temp3: +48.0°C (high = +120°C, hyst = +115°C) sensor = thermistor
vid: +1.650 V
alarms:
beep_enable:
Sound alarm disabled
------------
temp1 & fan3 on this mobo is not connected.
--
Cheers, Gene
"There are four boxes to be used in defense of liberty:
soap, ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt (Author)
99.24% setiathome rank, not too shabby for a WV hillbilly
Yahoo.com attorneys please note, additions to this message
by Gene Heskett are:
Copyright 2004 by Maurice Eugene Heskett, all rights reserved.
