On Thu, 2004-08-05 at 19:03, Alexander Dalloz wrote: > Am Fr, den 06.08.2004 schrieb jludwig um 0:27: > > > > Anyone else have this weird problem? My routing table is missing > > > the default lo entry (in FC2 only): > > > > > > orion# route > > > Kernel IP routing table > > > Destination Gateway Genmask Flags Metric Ref Use Iface > > > 10.105.108.0 * 255.255.255.0 U 0 0 0 eth0 > > > 10.1.1.0 * 255.255.255.0 U 0 0 0 eth1 > > > 169.254.0.0 * 255.255.0.0 U 0 0 0 eth1 > > > default router 0.0.0.0 UG 0 0 0 eth0 > > > orion# > > > > > > Is this normal ??? I would expect an enty like this to be there as well: > > > > > > 127.0.0.0 * 255.0.0.0 U 0 0 0 lo > > > > > > I doesn't *seem* to be a problem, but ya never know....... > > > > > > Ian > > Yes, I would expect that too. Don't actually know what's going on with > FC2 in this point. There must be changes in network scripts between FC1 > and FC2. Have to discover that next days. > > > There are programs which need the loop-back. > > > > This is my /etc/sysconfig/network-scripts/ifcfg-lo; > > > > DEVICE=lo > > IPADDR=127.0.0.1 > > NETMASK=255.0.0.0 > > NETWORK=127.0.0.0 > > # If you're having problems with gated making 127.0.0.0/8 a martian, > > # you can change this to something else (255.255.255.255, for example) > > BROADCAST=127.255.255.255 > > ONBOOT=yes > > NAME=loopback > > > jludwig <wralphie@xxxxxxxxxxx> > > jludwig, > > the loopback device exists, but the route not. I can confirm the fact on > my FC2. > > Alexander Looks like I'll have to upgrade, which will be painful since I have many cad/cam programs and such that may have serious issues. -- jludwig <wralphie@xxxxxxxxxxx>
