Joe(theWordy)Philbrook wrote:
> Could someone explain these error messages from FC2 dmesg?
>
> The error messages do not appear when I boot the same hardware with FC1.
>
<snip>
> hdb: command error: status=0x51 { DriveReady SeekComplete Error }
> hdb: command error: error=0x54
> end_request: I/O error, dev hdb, sector 0
> hdd: command error: status=0x51 { DriveReady SeekComplete Error }
> hdd: command error: error=0x54
> end_request: I/O error, dev hdd, sector 1437824
> hdd: command error: status=0x51 { DriveReady SeekComplete Error }
> hdd: command error: error=0x54
> end_request: I/O error, dev hdd, sector 0
> <snip>
> <End extract from dmesg>
>
> It would seem that FC2 thinks my cd drives are sick. But I don't get any
> errors from actual operation of them. They just don't scan well.
>
> I'd like to mention that in FC1 both the dvd-rom on hdd and the cd-rw on
> hdb=ide-scsi work fine with xcdroast. But for FC2 I found that I could
> only burn music cd's with xcdroast. I also found that trying to boot
> the FC2 kernel with "hdb=ide-scsi" was a bad idea...
What does hdparm say? Has FC2 turned DMA on, whereas FC1 had it off?
James.
--
E-mail address: james@ | Important note: when washing your brain out with
westexe.demon.co.uk | nitric acid, it is important to stop *after* you've
| erased the distressing images and *before* you get
| the urge to install AOL. -- "Jim"
