> Does this problem keep your computer running at 640 x 480 resolution? I > installed FC3T1 on a Dell computer with an 828656 Graphics Controller. I > could run system-config-display as root, setup the resolution, but > display is still in 640 x 480 mode. > GUI ---> System Settings > Display > > With the gnome-display-settings program. > GUI --> Preferences > Screen Resolution, it would not allow any choices. > > I believe there was mention by someone awhile ago about this problem, > I'm not sure they got an answer back or found a solution. Since it is > still in test1, I assume the problem is still there. > > Is this card supposed to be recognized as an 845? > > Jim No, it shows up as; 00:01.0 VGA compatible controller: Intel Corp. 82810E DC-133 CGC [Chipset Graphics Controller] (rev 03) I think your talking about an X problem right? I'm just trying to do a console framebuffer with the i810fb driver. But as for why you would maybe having problems with X on a Dell with that chipset.... Check into your logs and see if it is having a problem allocating video memory. Dell has this habit of breaking intel firmware by changing the I/O address for shadow memory allocation after they recieve working boards from their manufacturers. So what could be happening to you is when X tries to allocate the shared memory, it hits intels normal I/O address, finds nothing there and gives up with about 1 meg of memory to use which pretty much gives you 640x480 at 24bpp. You can try setting it to 16pbb and 800x600, or 8bpp at 1024x768 and see if it give you the resolution your after. (and that will tell you if you have a dell hacked/broken intel firmware) If that is the case (like you have something like a Inspiron 1100, 5100, m500. you didn't specify or I could better help you) A workaround for X has been committed to both branches (xorg and xfree86) about a year ago. So FC2T1 might already include it... But it is specific to the Dell model. -Mike
