Problem solved. In my ''/usr/lib/same/'' were not present the symbolic links ''libsane-epson.so'' and ''libsane-epson.so.1''. After i created them scanimage and xsane start to work. Thanks. Il gio, 2004-06-10 alle 17:17, Peter Silcock ha scritto: > Sorry to hear it. Have you tried Kooka to see if it is finding your > scanner? Is there a file called Epson:CC-570L.drc in your > ~/.sane/xsane/ directory? > > Peter > > Giuseppe Di Bona wrote: > > >Don't work for me. > > > >Thanks. > > > > > >Il mer, 2004-06-09 alle 18:17, Peter Silcock ha scritto: > > > > > >>Edit the file "/etc/sane.d/epson.conf" as follows: add a line containing > >> > >>usb > >> > >>on its own. Alternatively, add a # at the beginning of this line: > >> > >>scsi EPSON > >> > >>and remove the # at the beginning of the line > >> > >>#usb /dev/usb/scanner0 > >> > >>There's more info at > >>http://www.linuxprinting.org/show_printer.cgi?recnum=Epson-Stylus_CX3200 > >> > >>Peter Silcock > >> > >> > >>gdbnet@xxxxxxxxxxxxx wrote: > >> > >> > >> > >>>Hi to all, > >>> > >>>I've just buy an Epson CX3200 multifunction printer. > >>>I choosed this one because linuxprinting.org say it's supported, the > >>>same xsane.org. > >>> > >>>Printing it's OK but i cannot use the scanner. > >>> > >>>Here some message from console: > >>> > >>>----------------------------------------------- > >>>sane-find-scanner > >>> > >>># No SCSI scanners found. If you expected something different, make sure > >>>that > >>># you have loaded a SCSI driver for your SCSI adapter. > >>> > >>>found USB scanner (vendor=0x05a9 [OmniVision Technologies, Inc.], > >>>product=0x0518 [USB Camera]) at libusb:001:003 > >>>found USB scanner (vendor=0x04b8 [EPSON], product=0x0802 [USB MFP]) at > >>>libusb:001:002 > >>># Your USB scanner was (probably) detected. It may or may not be > >>>supported by > >>># SANE. Try scanimage -L and read the backend's manpage. > >>> > >>># Scanners connected to the parallel port or other proprietary ports > >>>can't be > >>># detected by this program. > >>>----------------------------------------------- > >>> > >>>scanimage -L > >>> > >>>No scanners were identified. If you were expecting something different, > >>>check that the scanner is plugged in, turned on and detected by the > >>>sane-find-scanner tool (if appropriate). Please read the documentation > >>>which came with this software (README, FAQ, manpages). > >>>----------------------------------------------- > >>> > >>>xsane tell me there's no scanner. > >>> > >>>I use FC2. > >>> > >>>Thanks. > >>> > >>> > >>> > >>> > >>> > >>> > > > > > > > > >
