On Mon, Jun 07, 2004 at 18:21:57 +0200, Alexander Dalloz <alexander.dalloz@xxxxxxxxxxxxxxxx> wrote: > Am Mo, den 07.06.2004 schrieb Bruno Wolff III um 18:13: > > > I am not sure if I am looking at a kernel problem, a cdrecord problem, > > a drive problem or a configuration problem (e.g. using ide-scsi). > > See the FC2 release notes: > > http://download.fedora.redhat.com/pub/fedora/linux/core/2/i386/os/RELEASE-NOTES-en.html OK. I think when I tried k3b I had already been using /dev/hdd, but for cdroast I was using scan devices and it wasn't showing that name for the DVD drives so I hadn't been using them. I tried again using cdroast writing to /dev/hdd and still had problems. > Be sure, you have no ide-scsi parameter in the kernel line in > /etc/grub.conf. I had tried that as part of trying possible solutions to the problem, but I am not using ide-scsi boot parameters now or for the previous sample. I was able to (apparantly) blank a CDRW disc successfully. But when I tried writing audio data to the drive things didn't work. Maybe I need to be using a different mode for something to get things to work with this particular type of drive. Here is the latest cdrecord.out file from the failed attempt: Calling: /usr/lib/xcdroast-0.98/bin/xcdrwrap CDRECORD dev= "/dev/hdd" gracetime=2 fs=4096k driveropts=burnfree -v -useinfo speed=4 -dao -eject -pad -audio "/tmp/.CD/track-01.wav" ... scsidev: '/dev/hdd' devname: '/dev/hdd' scsibus: -2 target: -2 lun: -2 Warning: Open by 'devname' is unintentional and not supported. Linux sg driver version: 3.5.27 cdrecord: Warning: using inofficial libscg transport code version (schily - Red Hat-scsi-linux-sg.c-1.80-RH '@(#)scsi-linux-sg.c 1.80 04/03/08 Copyright 1997 J. Schilling'). SCSI buffer size: 64512 Cdrecord-Clone 2.01a27-dvd (i686-pc-linux-gnu) Copyright (C) 1995-2004 Jörg Schilling Note: This version is an unofficial (modified) version with DVD support Note: and therefore may have bugs that are not present in the original. Note: Please send bug reports or support requests to <warly@xxxxxxxxxxxxxxxx>. Note: The author of cdrecord should not be bothered with problems in this version. TOC Type: 0 = CD-DA Using libscg version 'schily-0.8'. Driveropts: 'burnfree' atapi: 1 Device type : Removable CD-ROM Version : 0 Response Format: 2 Capabilities : Vendor_info : '_NEC ' Identifikation : 'DVD_RW ND-1300A ' Revision : '1.0A' Device seems to be: Generic mmc2 DVD-R/DVD-RW. Current: 0x000A Profile: 0x001B Profile: 0x001A Profile: 0x0014 Profile: 0x0013 Profile: 0x0011 Profile: 0x0010 Profile: 0x000A (current) Profile: 0x0009 Profile: 0x0008 (current) Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr). Driver flags : MMC-3 SWABAUDIO BURNFREE Supported modes: TAO PACKET SAO SAO/R96R RAW/R96R Drive buf size : 1345536 = 1314 KB FIFO size : 4194304 = 4096 KB pregap1: -1 Track 01: audio 39 MB (03:55.02) no preemp Track 02: audio 29 MB (02:55.04) no preemp Track 03: audio 35 MB (03:32.96) no preemp Track 04: audio 40 MB (04:00.64) no preemp Track 05: audio 28 MB (02:48.13) no preemp Track 06: audio 32 MB (03:14.06) no preemp Track 07: audio 36 MB (03:34.33) no preemp Track 08: audio 42 MB (04:14.93) no preemp Track 09: audio 31 MB (03:05.42) no preemp Track 10: audio 38 MB (03:49.10) no preemp Track 11: audio 20 MB (02:03.00) no preemp Track 12: audio 43 MB (04:20.26) no preemp Track 13: audio 60 MB (05:57.40) no preemp Track 14: audio 46 MB (04:33.93) no preemp Track 15: audio 27 MB (02:42.73) no preemp Track 16: audio 50 MB (05:02.20) no preemp Track 17: audio 74 MB (07:20.80) no preemp Track 18: audio 43 MB (04:17.76) no preemp Total size: 721 MB (71:27.76) = 321582 sectors Lout start: 721 MB (71:29/57) = 321582 sectors Current Secsize: 2048 ATIP info from disk: Indicated writing power: 5 Reference speed: 2 Is not unrestricted Is erasable ATIP start of lead in: -11635 (97:26/65) ATIP start of lead out: 337350 (75:00/00) 1T speed low: 0 (reserved val 0) 1T speed high: 4 2T speed low: 8 2T speed high: 0 (reserved val 10) power mult factor: 4 6 recommended erase/write power: 3 A1 values: 02 4C B0 A2 values: 4A C8 06 Disk type: Phase change Manuf. index: 3 Manufacturer: CMC Magnetics Corporation Blocks total: 337350 Blocks current: 337350 Blocks remaining: 15768 Starting to write CD/DVD at speed 4.0 in real SAO mode for single session. Waiting for reader process to fill input buffer ... input buffer ready. trackno=0 BURN-Free is ON. Performing OPC... Sending CUE sheet... cdrecord: WARNING: Drive returns wrong startsec (0) using -150 Writing pregap for track 1 at -150 cdrecord: Success. write_g1: scsi sendcmd: no error write track pad data: error after 0 bytes CDB: 2A 00 FF FF FF 6A 00 00 1B 00 Starting new track at sector: 0 status: 0x4 (CONDITION MET/GOOD) resid: 63504 cmd finished after 200.220s timeout 200s cdrecord: Success. read buffer cap: scsi sendcmd: no error CDB: 5C 00 00 00 00 00 00 00 0C 00 status: 0x2 (CHECK CONDITION) Sense Bytes: 70 00 02 00 00 00 00 0A 00 00 00 00 04 01 00 00 Sense Key: 0x2 Not Ready, Segment 0 Sense Code: 0x04 Qual 0x01 (logical unit is in process of becoming ready) Fru 0x0 Sense flags: Blk 0 (not valid) resid: 12 cmd finished after 0.001s timeout 200s cdrecord: Success. write_g1: scsi sendcmd: no error CDB: 2A 00 00 00 00 00 00 00 1B 00 status: 0x2 (CHECK CONDITION) Sense Bytes: 70 00 02 00 00 00 00 0A 00 00 00 00 04 01 00 00 Sense Key: 0x2 Not Ready, Segment 0 Sense Code: 0x04 Qual 0x01 (logical unit is in process of becoming ready) Fru 0x0 Sense flags: Blk 0 (not valid) resid: 63504 cmd finished after 0.000s timeout 200s cdrecord: A write error occured. cdrecord: Please properly read the error message above. cdrecord: Success. test unit ready: scsi sendcmd: no error write track data: error after 0 bytes CDB: 00 00 00 00 00 00 Writing time: 207.694s status: 0x2 (CHECK CONDITION) Average write speed 2.3x. Sense Bytes: 70 00 02 00 00 00 00 0A 00 00 00 00 04 01 00 80 Fixating... Sense Key: 0x2 Not Ready, Segment 0 Sense Code: 0x04 Qual 0x01 (logical unit is in process of becoming ready) Fru 0x0 Sense flags: Blk 0 (not valid) operation 0% done cmd finished after 0.009s timeout 200s cdrecord: Success. flush cache: scsi sendcmd: no error CDB: 35 00 00 00 00 00 00 00 00 00 status: 0x2 (CHECK CONDITION) Sense Bytes: 70 00 02 00 00 00 00 0A 00 00 00 00 04 01 00 80 Sense Key: 0x2 Not Ready, Segment 0 Sense Code: 0x04 Qual 0x01 (logical unit is in process of becoming ready) Fru 0x0 Sense flags: Blk 0 (not valid) operation 0% done cmd finished after 0.000s timeout 200s Trouble flushing the cache Fixating time: 13.069s BURN-Free was never needed. cdrecord: fifo had 64 puts and 1 gets. cdrecord: fifo was 0 times empty and 0 times full, min fill was 100%.
