Winmodem symlink

["B.J. McClure" <bjmcclure@xxxxxxxxxxxxx>]

I did not get a response to this issue from the list but did get a solution from the folks at linuxant and thought I should post it just in case someone with the same issue searches the archives.


>     Hi,
>     
>     to fix problems 1 and 3, please add the following line in your
>     '/etc/rc.local' file :
>     
>     ---
>     hsfconfig --serial
>     ---
>     
>     This command will be executed at each boot and will make sure that
>     '/dev/modem' points to '/dev/ttySHSF0'. It will also make sure that the
>     '/dev/ttySHSF0' character device file is correctly configured.
>     
>     For the second problem, it is quite possible that the tool read a database
>     of drivers that came with the distribution and is not aware of other
>     drivers such as our HSF driver. For the tool, every modem with 8086:2486
>     Sub 104d:8142 requires the 'serial_cs' driver, no matter what is currently
>     installed to handle the modem right now.
>     
>     Regards,
>     
>     
>     Jonathan
>     Technical specialist / Linuxant
>     www.linuxant.com
>     support@xxxxxxxxxxxx

Cheers,
B.J. McClure