On Thursday 27 May 2004 16:54, Wade Chandler wrote: > Phil Savoie wrote: > > Hi All, > > > > Am using FC2 in Dell Optiplex. I would like to use this box as a router > > and have an onboard 3comm plus 5 pci slots that I would like to use with > > Linksys pci cards. > > > > Trouble is, although kudzu picks up all interfaces, which I have > > configured correctly, only eth0 to eth4 get recognized. Where is eth5? > > A quick look under /etc/sysconfig/networking-scripts shows no entry for > > eth5. > > > > Is this a limit? If so, how do I increase it. Although I haven't > > tried, do you think manually creating the eth5 file could do it? > > > > Regards, > > > > Phil Savoie > > So you don't have > eth0 1 > eth1 2 > eth2 3 > eth3 4 > eth4 5 > ? > > Wade > Hi Wade, As the system boots I see lo, eth0(on-board), eth1(pci), eth2(pci), eth3(pci) and eth4(pci) as they get configured. As I mentioned, I have correctly configured all 5 pci cards when kudzu recognized them the first time I put them into the box. The 5th nic just does not come up. No errors nothing. Phil
