sön 2004-05-23 klockan 17.32 skrev Chris Kloiber: > On Sun, 2004-05-23 at 22:39, Jan Håkansson wrote: > > Hi > > > > I have tried to change my settings on my NIC with ethtool. > > I run "ethtool -s eth1 autoneg off" and "ethtool -s eth1 duplex full". > > And it working perfect, but when I restart the computer the setting are > > back to autoneg on and duplex half. > > How can I save the settings. > > > > /Jan > > Add to /etc/sysconfig/network-scripts/ifcfg-eth1: > > ETHTOOL_OPTS="speed 100 duplex full autoneg off" > > Of course this should not be needed. If you set your switches port to > auto-negotiation the network card will likely do the right thing. > > -- > Chris Kloiber > > Hi It work, but only if I set the speed to 10, when I try speed 100 the network wont start. Thanks. /Jan
