When I try to run the command 'ifup eth0', I get:
Tulip device eth0 does not seem to be present, delaying initialization.
On the GUI network config tool, on the hardware tab, I can see the adapter. I double click on this and get a dialog box that has, in the Adapter drop down box (which is disabled):
DECchip 21041 [Tulip pass 3]
The rest of the values on this are blank - is this the problem?
When I do lspci, I can see the adapter and it seems to have IRQ's and the like.
Thanks, Richard
Rick Stevens wrote:
Richard McGrath wrote:
Hi.
I have a DECchip 21041 ethernet card. FC can detected it and tries to use the tulip driver. However when I try to bring up eth0 it does not work.
Define "does not work". The tulip driver has been around for ages and it does work on that chipset. I have it running on about 40 machines. ---------------------------------------------------------------------- - Rick Stevens, Senior Systems Engineer rstevens@xxxxxxxxxxxxxxx - - VitalStream, Inc. http://www.vitalstream.com - - - - The world is coming to an end ... SAVE YOUR FILES!!! - ----------------------------------------------------------------------
