I installed fedora2-test1 on my computer (Asus A7N8X-E, Barton 2500) and everything (almost) works very well. However, I just cant seem to get eth2 to work. [root@as1-6-6 root]# ifup eth2 forcedeth device eth2 does not seem to be present, delaying initialization. [root@as1-6-6 root]# cat /etc/sysconfig/networking/devices/ifcfg-eth2 # nVidia Corporation|nForce2 Ethernet Controller DEVICE=eth2 ONBOOT=yes BOOTPROTO=none IPADDR=10.10.121.1 NETMASK=255.255.255.0 TYPE=Ethernet USERCTL=no PEERDNS=no IPV6INIT=no [root@as1-6-6 root]# /bin/dmesg [...] forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.19. PCI: Setting latency timer of device 0000:00:04.0 to 64 divert: allocating divert_blk for eth0 eth0: forcedeth.c: subsystem: 01043:80a7 bound to 0000:00:04.0 kudzu: numerical sysctl 1 49 is obsolete. ip_tables: (C) 2000-2002 Netfilter core team ip_conntrack version 2.1 (8191 buckets, 65528 max) - 324 bytes per conntrack request_module: failed /sbin/modprobe -- char-major-4-72. error = 256 lp0: using parport0 (polling). lp0: console ready NET: Registered protocol family 10 Disabled Privacy Extensions on device c039d980(lo) IPv6 over IPv4 tunneling driver divert: not allocating divert_blk for non-ethernet device sit0 eth0: no IPv6 routers present [...] I upgraded the kernel from 2.6.1-1.65 to 2.6.4-1.298 hoping that this would help, but the results the same. I'm relatively new to Linux, and currently I havent got a clue on what to do next. Anyone else had any success with this combination, or have some hints on how to resolve this problem? Kind regards /Lennart
