Re: Determining IP information for eth0 failed

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Jeroen Van Goey wrote:

I'm not sure it's relevant, but when the fibrecable from the ISP comes into my house, it
goes to a switch> From there one cable goes to a Windows PC, and one to an
ex-Windows-now-Limux PC (mine, the one with troubles)>


printer / pc1 (windows) \ \ Switch/hub--------cablemodem-----fibrecable-------myISP---------Internet / / pc2 (Linux)

I mention this, because I was thinking that I should search the solution into
masquarading, gateways, etc.




Is the switch/hub [pick one, they are different.... :) ] really a CableModem/DSL ROUTER [that is, on the original box, did it say either Cable Modem Router or DSL Router, or both?].
Is PC1 getting an IP address from your ISP?
How many leases have you purchased from your ISP?
Did you purchase the cable modem?


The reason for asking these questions:

1) The switches and hubs that I have seen will not do Network Address Translation [NAT]. However, Routers do.
2) If you only have 1 lease purchased from your ISP, why would you expect them to give you 2 addresses [assuming PC1 works]?
3) The cable modems that I have seen that are owned by the ISP [that is, you lease the cable modem] allow for exactly 1 network card MAC address. If PC1 works, then the cable modem may completely IGNORE other requests [which is what appears to be happening].


If you really do have a network switch or hub, then you have two options:
1) Purchase a CableModem/DSL Router (~$50-60 US), and let the switch collect dust, reset your cablemodem.
2) Purchase a 2nd Network Interface Card [NIC] (~$10-20 US) for either PC1 or PC2, connect the cablemodem to the machine that has 2 network cards [either card will do], connect the other card to your switch/hub, set up NAT, Install a Firewall, possibly reset your cablemodem.


Personally, I went with option 2, but then, it taught me a lot about networking, firewalls, etc. Option 1 is great for people who just want the thing to work. If you go with option 2, I would recommend putting the 2nd network card into PC2, since it is running Linux, and this is a Fedora List....

--
Keven Ring               | The called it Paraside, I don't know why
The MITRE Corporation    | Call somplace Paradise - Kiss it Goodbye
7515 Colshire Drive      |
McLean VA 22102-7508     |              The Eagles, The Last Resort
PH: (703)883-7026        |





[Index of Archives]     [Current Fedora Users]     [Fedora Desktop]     [Fedora SELinux]     [Yosemite News]     [Yosemite Photos]     [KDE Users]     [Fedora Tools]     [Fedora Docs]

  Powered by Linux