Mihai Maties wrote:
On Tuesday 02 March 2004 18:48, Andrew Robinson wrote:Also, if you are copying from cd to cdrw you need both hdc and hdd as ide-scsi.
Having seen the virtues of k3b extolled in the forum, I decided to give it a try. It works fine for creating a cd from scratch. However, when I try to copy a cd, I get errors that seem to be related to this message:
No support for ATAPI with cdrdao
You will not be able to use all your reading devices as copy
sources since there is at least one not configured to use
SCSI emulation and your system does not support ATAPI with
cdrdao.
Solution: The best and recommended solution is to enable
ide-scsi (SCSI emulation) for all devices. This way you won't
have any problems.
K3b is able to copy CDs via cdrdao or readcd/cdrecord. cdrdao does not support ATAPI devices natively so you must enable scsi emulation on your device to use it.
Since you are not using scsi-emulation K3b warns you about not being able to use cdrdao at all, but it shouldn't be any problem because you can still copy CDs via readcd/cdrecord.
Using Google, I never found a definitive answer to this. The best suggestion seemed to be to include a directive in the grub.conf. When I looked, I seemed to already have this directive:
title Fedora Core (2.4.22-awr1)
root (hd0,9)
kernel /boot/vmlinuz-2.4.22-awr1 ro root=LABEL=/12
hdc=ide-scsi rhgb
initrd /boot/initrd-2.4.22-awr1.img
You must have the "hdc=ide-scsi" part on the same line with "kernel...".
This is done by adding the "hdd=ide-scsi" to the kernel line above
Which seems to matche what I see in dmesg:
hdc: attached ide-cdrom driver. hdc: ATAPI 52X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33) hdd: attached ide-cdrom driver. hdd: ATAPI 48X DVD-ROM drive, 128kB Cache, UDMA(33)
I'm now lost. Could someone help me out with the correct configuration?
You could enable scsi-emulation on your device if for some reason copying cds with cdrecord does not work.
Mihai
