I have just installed Fedora for the first time, and am running into problems with my NIC. The box has a 3com 905B card in it, which is capable of 100full. The OS seems to recognize this capability, and also recognizes the link partner also has this capability. However, the link auto negotiates to 10full. I have tried forcing it via mii-tool, but it won't take the change. I added these lines to modules.conf:
"options 3c59x options=4 full_duplex=1"
But, that failed to obtain a link at all. Below is the output of mii-tool with no driver options:
eth0: 10 Mbit, full duplex, link ok product info: vendor 01:e1:c1, model 56 rev 7 basic mode: isolate, collision test, 10 Mbit, full duplex basic status: autonegotiation restarted, link ok capabilities: advertising: 100baseT4 100baseTx-FD 100baseTx-HD flow-control link partner: 100baseT4 100baseTx-FD 100baseTx-HD flow-control
Any ideas how I can force this to 100full?
Thanks.
Jason
I use the 3c59x module too and I couldn't make my card work properly with the default autonegotiation, so I forced 100-FD both at the switch and my computer, and now the errors are gone.
These are the relevant lines in "/etc/modules.conf":
###### # Tarjeta de red (3Com 3c905C-TX/TX-M [Tornado]) # # 0x200 = 10BASET, FD # 0x204 = 100BASETX, FD # 0x008 = Auto # alias eth0 3c59x options 3c59x "options=0x204"
Hope this helps.
-- Marina Buitrago Bravo (buitrago@xxxxx) Servicio de Informática y Comunicaciones Universidad de Sevilla "El tiempo no es importante, sólo la vida es importante."
NOTA: Este mensaje está firmado digitalmente. Para poder reconocer la
firma desde su cliente de correo debe instalar el certificado
raíz de la Autoridad de Certificación de la Universidad de
Sevilla en su navegador, disponible en:
https://www.us.es/SIC/ca-us/
Attachment:
smime.p7s
Description: S/MIME Cryptographic Signature
