I have just installed Fedora for the first time, and am running into problems with my NIC. The box has a 3com 905B card in it, which is capable of 100full. The OS seems to recognize this capability, and also recognizes the link partner also has this capability. However, the link auto negotiates to 10full. I have tried forcing it via mii-tool, but it won't take the change. I added these lines to modules.conf: "options 3c59x options=4 full_duplex=1" But, that failed to obtain a link at all. Below is the output of mii-tool with no driver options: eth0: 10 Mbit, full duplex, link ok product info: vendor 01:e1:c1, model 56 rev 7 basic mode: isolate, collision test, 10 Mbit, full duplex basic status: autonegotiation restarted, link ok capabilities: advertising: 100baseT4 100baseTx-FD 100baseTx-HD flow-control link partner: 100baseT4 100baseTx-FD 100baseTx-HD flow-control Any ideas how I can force this to 100full? Thanks. Jason
