On Jan 2, 2004 at 17:51, Eric Beyer in a soothing rage wrote: >Hello all, > >I have been experimenting with the 2.6 kernels from >http://people.redhat.com/arjanv/2.6/ and have found that for some reason >during boot the kernel is not auto loading the sk98lin module for my >3c940 LOM. I have a ASUS P4P800 motherboard and everything seems to work >when booting the 2.4.22-1.2135 kernel (with the exception of sound which >is a whole different issue...). > >Anyway, does anyone have any suggestions I might try other than my >temporary work around by adding "modprobe sk98lin" to rc.local? I assume >that it still reads modules.conf so having "alias eth0 sk98lin" should >have done the trick as it has on the 2.4.22-1.2135 kernel. The 2.6 kernels use /etc/modprobe.conf. Amend that to suit. N.Emile... -- Registered Linux User # 125653 (http://counter.li.org) Switch to: http://www.speakeasy.net/refer/190653 Your temporary financial embarrassment will be relieved in a surprising manner. 19:25:12 up 30 days, 12 min, 3 users, load average: 0.00, 0.00, 0.00
