I have a USB 2.0 PCI 5 port card that is generating a host of errors.
Has anyone had any experience with SIIG?
Here is the dmesg file:
3-fs: mounted filesystem with ordered data mode. Freeing unused kernel memory: 136k freed usb.c: registered new driver usbdevfs usb.c: registered new driver hub PCI: Found IRQ 9 for device 00:09.0 PCI: Sharing IRQ 9 with 00:0d.0 usb-ohci.c: USB OHCI at membase 0xf084c000, IRQ 9 usb-ohci.c: usb-00:09.0, NEC Corporation USB usb.c: new USB bus registered, assigned bus number 1 hub.c: USB hub found hub.c: 3 ports detected PCI: Found IRQ 5 for device 00:09.1 IRQ routing conflict for 00:07.2, have irq 10, want irq 5 IRQ routing conflict for 00:07.3, have irq 10, want irq 5 PCI: Sharing IRQ 5 with 00:0a.0 usb-ohci.c: USB OHCI at membase 0xf084e000, IRQ 5 usb-ohci.c: usb-00:09.1, NEC Corporation USB (#2) usb.c: new USB bus registered, assigned bus number 2 hub.c: USB hub found hub.c: 2 ports detected PCI: Found IRQ 10 for device 00:09.2 ehci_hcd 00:09.2: NEC Corporation USB 2.0 ehci_hcd 00:09.2: irq 10, pci mem f0856000 usb.c: new USB bus registered, assigned bus number 3 ehci_hcd 00:09.2: USB 2.0 enabled, EHCI 0.95, driver 2003-Jun-19/2.4 hub.c: USB hub found hub.c: 5 ports detected usb-uhci.c: $Revision: 1.275 $ time 15:37:48 Oct 29 2003 usb-uhci.c: High bandwidth mode enabled PCI: Found IRQ 5 for device 00:07.2 IRQ routing conflict for 00:07.2, have irq 10, want irq 5 IRQ routing conflict for 00:07.3, have irq 10, want irq 5 PCI: Sharing IRQ 5 with 00:09.1 PCI: Sharing IRQ 5 with 00:0a.0 usb-uhci.c: USB UHCI at I/O 0xd400, IRQ 10 usb-uhci.c: Detected 2 ports usb.c: new USB bus registered, assigned bus number 4 hub.c: USB hub found hub.c: 2 ports detected PCI: Found IRQ 5 for device 00:07.3 IRQ routing conflict for 00:07.2, have irq 10, want irq 5 IRQ routing conflict for 00:07.3, have irq 10, want irq 5 PCI: Sharing IRQ 5 with 00:09.1 PCI: Sharing IRQ 5 with 00:0a.0 usb-uhci.c: USB UHCI at I/O 0xd800, IRQ 10 usb-uhci.c: Detected 2 ports usb.c: new USB bus registered, assigned bus number 5 hub.c: USB hub found hub.c: 2 ports detected usb-uhci.c: v1.275:USB Universal Host Controller Interface driver usb.c: registered new driver hiddev usb.c: registered new driver hid hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <vojtech@xxxxxxx> hid-core.c: USB HID support drivers mice: PS/2 mouse device common for all mice hub.c: new USB device 00:07.2-1, assigned address 2 usb.c: USB device 2 (vend/prod 0x3f0/0xb602) is not claimed by any active driver. EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,2), internal journal Adding Swap: 1534168k swap-space (priority -1) usb-uhci.c: ENXIO 80000280, flags 0, urb ef69c540, burb ef69c2c0 usbdevfs: USBDEVFS_CONTROL failed dev 2 rqt 128 rq 6 len 9 ret -6 usb.c: registered new driver usblp printer.c: usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x03F0 pid 0xB602 printer.c: v0.11: USB Printer Device Class driver SCSI subsystem driver Revision: 1.00 Initializing USB Mass Storage driver... usb.c: registered new driver usb-storage scsi0 : SCSI emulation for USB Mass Storage devices Vendor: HP Model: photosmart 7900 Rev: 1.00 Type: Direct-Access ANSI SCSI revision: 02 WARNING: USB Mass Storage data integrity not assured USB Mass Storage device found at 2 USB Mass Storage support registered. usb-uhci.c: ENXIO 80000280, flags 0, urb ef69c440, burb ef69c6c0 usbdevfs: USBDEVFS_CONTROL failed dev 2 rqt 128 rq 6 len 9 ret -6 usb-uhci.c: ENXIO 80000280, flags 0, urb ef69c1c0, burb ef69c440 usbdevfs: USBDEVFS_CONTROL failed dev 2 rqt 128 rq 6 len 9 ret -6 usb-uhci.c: ENXIO 80000280, flags 0, urb ef69c6c0, burb ef69c1c0 usbdevfs: USBDEVFS_CONTROL failed dev 2 rqt 128 rq 6 len 9 ret -6 usb-uhci.c: ENXIO 80000280, flags 0, urb ef69c6c0, burb ef69c1c0 usbdevfs: USBDEVFS_CONTROL failed dev 2 rqt 128 rq 6 len 9 ret -6 usb-uhci.c: ENXIO 80000280, flags 0, urb ef69c440, burb ef69c1c0 usbdevfs: USBDEVFS_CONTROL failed dev 2 rqt 128 rq 6 len 9 ret -6 kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,1), internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,71), internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,65), internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,66), internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,70), internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,67), internal journal EXT3-fs: mounted filesystem with ordered data mode. hdc: attached ide-scsi driver. hdd: attached ide-scsi driver. scsi1 : SCSI host adapter emulation for IDE ATAPI devices Vendor: SONY Model: DVD RW DRU-510A Rev: 1.0c Type: CD-ROM ANSI SCSI revision: 02 Vendor: LITE-ON Model: LTR-52327S Rev: QS04 Type: CD-ROM ANSI SCSI revision: 02 parport0: PC-style at 0x378 [PCSPP,EPP] parport_pc: Via 686A parallel port: io=0x378 Attached scsi CD-ROM sr0 at scsi1, channel 0, id 0, lun 0 Attached scsi CD-ROM sr1 at scsi1, channel 0, id 1, lun 0 sr0: scsi3-mmc drive: 32x/32x writer cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.12 sr1: scsi3-mmc drive: 52x/52x writer cd/rw xa/form2 cdda tray Attached scsi removable disk sda at scsi0, channel 0, id 0, lun 0 sda: Unit Not Ready, sense: Current 00:00: sense key Not Ready Additional sense indicates Medium not present sda : READ CAPACITY failed. sda : status = 1, message = 00, host = 0, driver = 08 Current sd00:00: sense key Not Ready Additional sense indicates Medium not present sda : block size assumed to be 512 bytes, disk size 1GB. sda: I/O error: dev 08:00, sector 0 I/O error: dev 08:00, sector 0 unable to read partition table sda: Unit Not Ready, sense: Current 00:00: sense key Not Ready Additional sense indicates Medium not present sda : READ CAPACITY failed. sda : status = 1, message = 00, host = 0, driver = 08 Current sd00:00: sense key Not Ready Additional sense indicates Medium not present sda : block size assumed to be 512 bytes, disk size 1GB. sda: test WP failed, assume Write Enabled sda: I/O error: dev 08:00, sector 0 I/O error: dev 08:00, sector 0 unable to read partition table inserting floppy driver for 2.4.22-1.2115.nptl Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 PCI: Found IRQ 11 for device 00:0c.0 3c59x: Donald Becker and others. www.scyld.com/network/vortex.html See Documentation/networking/vortex.txt 00:0c.0: 3Com PCI 3c905C Tornado at 0xe400. Vers LK1.1.18-ac 00:04:76:f6:f9:96, IRQ 11 product code 5545 rev 00.13 date 11-03-02 Internal config register is 1800000, transceivers 0xa. 8K byte-wide RAM 5:3 Rx:Tx split, autoselect/Autonegotiate interface. MII transceiver found at address 24, status 782d. Enabling bus-master transmits and whole-frame receives. 00:0c.0: scatter/gather enabled. h/w checksums enabled divert: allocating divert_blk for eth0 divert: freeing divert_blk for eth0 ip_tables: (C) 2000-2002 Netfilter core team PCI: Found IRQ 11 for device 00:0c.0 3c59x: Donald Becker and others. www.scyld.com/network/vortex.html See Documentation/networking/vortex.txt 00:0c.0: 3Com PCI 3c905C Tornado at 0xe400. Vers LK1.1.18-ac 00:04:76:f6:f9:96, IRQ 11 product code 5545 rev 00.13 date 11-03-02 Internal config register is 1800000, transceivers 0xa. 8K byte-wide RAM 5:3 Rx:Tx split, autoselect/Autonegotiate interface. MII transceiver found at address 24, status 782d. Enabling bus-master transmits and whole-frame receives. 00:0c.0: scatter/gather enabled. h/w checksums enabled divert: allocating divert_blk for eth0 ip_tables: (C) 2000-2002 Netfilter core team Installing knfsd (copyright (C) 1996 okir@xxxxxxxxxxxx). parport0: PC-style at 0x378 [PCSPP,EPP] parport_pc: Via 686A parallel port: io=0x378 lp0: using parport0 (polling). lp0: console ready Linux agpgart interface v0.99 (c) Jeff Hartmann agpgart: Maximum main memory to use for agp memory: 691M agpgart: Detected Via Apollo Pro KT133 chipset agpgart: AGP aperture is 64M @ 0xd0000000 [drm] AGP 0.99 Aperture @ 0xd0000000 64MB [drm] Initialized radeon 1.7.0 20020828 on minor 0 [drm] Loading R200 Microcode Creative EMU10K1 PCI Audio Driver, version 0.20, 15:37:46 Oct 29 2003 PCI: Found IRQ 5 for device 00:0a.0 IRQ routing conflict for 00:07.2, have irq 10, want irq 5 IRQ routing conflict for 00:07.3, have irq 10, want irq 5 PCI: Sharing IRQ 5 with 00:09.1 emu10k1: EMU10K1 rev 10 model 0x8065 found, IO at 0xdc00-0xdc1f, IRQ 5 ac97_codec: AC97 Audio codec, id: EMC40 (Unknown) emu10k1: SBLive! 5.1 card detected usb.c: USB disconnect on device 00:07.2-1 address 2 printer.c: usblp0: removed sda: Unit Not Ready, sense: Info fld=0xa00 (nonstd), Current 00:00: sense key Not Ready sda : READ CAPACITY failed. sda : status = 1, message = 00, host = 0, driver = 08 Info fld=0xa00 (nonstd), Current sd00:00: sense key Not Ready sda : block size assumed to be 512 bytes, disk size 1GB. sda: test WP failed, assume Write Enabled sda: I/O error: dev 08:00, sector 0 I/O error: dev 08:00, sector 0 unable to read partition table sda: Unit Not Ready, sense: Info fld=0xa00 (nonstd), Current 00:00: sense key Not Ready sda : READ CAPACITY failed. sda : status = 1, message = 00, host = 0, driver = 08 Info fld=0xa00 (nonstd), Current sd00:00: sense key Not Ready sda : block size assumed to be 512 bytes, disk size 1GB. sda: test WP failed, assume Write Enabled sda: I/O error: dev 08:00, sector 0 I/O error: dev 08:00, sector 0 unable to read partition table sda: Unit Not Ready, sense: Info fld=0xa00 (nonstd), Current 00:00: sense key Not Ready sda : READ CAPACITY failed. sda : status = 1, message = 00, host = 0, driver = 08 Info fld=0xa00 (nonstd), Current sd00:00: sense key Not Ready sda : block size assumed to be 512 bytes, disk size 1GB. sda: test WP failed, assume Write Enabled sda: I/O error: dev 08:00, sector 0 I/O error: dev 08:00, sector 0 unable to read partition table sda: Unit Not Ready, sense: Info fld=0xa00 (nonstd), Current 00:00: sense key Not Ready sda : READ CAPACITY failed. sda : status = 1, message = 00, host = 0, driver = 08 Info fld=0xa00 (nonstd), Current sd00:00: sense key Not Ready sda : block size assumed to be 512 bytes, disk size 1GB. sda: test WP failed, assume Write Enabled sda: I/O error: dev 08:00, sector 0 I/O error: dev 08:00, sector 0 unable to read partition table sda: Unit Not Ready, sense: Info fld=0xa00 (nonstd), Current 00:00: sense key Not Ready sda : READ CAPACITY failed. sda : status = 1, message = 00, host = 0, driver = 08 Info fld=0xa00 (nonstd), Current sd00:00: sense key Not Ready sda : block size assumed to be 512 bytes, disk size 1GB. sda: test WP failed, assume Write Enabled sda: I/O error: dev 08:00, sector 0 I/O error: dev 08:00, sector 0 unable to read partition table sda: Unit Not Ready, sense: Info fld=0xa00 (nonstd), Current 00:00: sense key Not Ready sda : READ CAPACITY failed. sda : status = 1, message = 00, host = 0, driver = 08 Info fld=0xa00 (nonstd), Current sd00:00: sense key Not Ready sda : block size assumed to be 512 bytes, disk size 1GB. sda: test WP failed, assume Write Enabled sda: I/O error: dev 08:00, sector 0 I/O error: dev 08:00, sector 0 unable to read partition table hub.c: new USB device 00:07.2-1, assigned address 3 printer.c: usblp0: USB Bidirectional printer dev 3 if 0 alt 0 proto 2 vid 0x03F0 pid 0xB602 WARNING: USB Mass Storage data integrity not assured USB Mass Storage device found at 3 usb-uhci.c: ENXIO 80000380, flags 0, urb d9ccadc0, burb d9cca6c0 usbdevfs: USBDEVFS_CONTROL failed dev 3 rqt 128 rq 6 len 9 ret -6 usb-uhci.c: ENXIO 80000380, flags 0, urb d9cca6c0, burb d9ccad40 usbdevfs: USBDEVFS_CONTROL failed dev 3 rqt 128 rq 6 len 92 ret -6 usb-uhci.c: ENXIO 80000380, flags 0, urb d9ccad40, burb d9cca6c0 usbdevfs: USBDEVFS_CONTROL failed dev 3 rqt 128 rq 6 len 9 ret -6 usb-uhci.c: ENXIO 80000380, flags 0, urb d9ccadc0, burb d9cca6c0 usbdevfs: USBDEVFS_CONTROL failed dev 3 rqt 128 rq 6 len 9 ret -6 usb-uhci.c: ENXIO 80000380, flags 0, urb d9cca6c0, burb d9ccadc0 usbdevfs: USBDEVFS_CONTROL failed dev 3 rqt 128 rq 6 len 9 ret -6 sda: Unit Not Ready, sense: Current 00:00: sense key Not Ready Additional sense indicates Medium not present sda : READ CAPACITY failed. sda : status = 1, message = 00, host = 0, driver = 08 Current sd00:00: sense key Not Ready Additional sense indicates Medium not present sda : block size assumed to be 512 bytes, disk size 1GB. sda: test WP failed, assume Write Enabled sda: I/O error: dev 08:00, sector 0 I/O error: dev 08:00, sector 0 unable to read partition table sda: Unit Not Ready, sense: Current 00:00: sense key Not Ready Additional sense indicates Medium not present sda : READ CAPACITY failed. sda : status = 1, message = 00, host = 0, driver = 08 Current sd00:00: sense key Not Ready Additional sense indicates Medium not present sda : block size assumed to be 512 bytes, disk size 1GB. sda: test WP failed, assume Write Enabled sda: I/O error: dev 08:00, sector 0 I/O error: dev 08:00, sector 0 unable to read partition table sda: Unit Not Ready, sense: Current 00:00: sense key Not Ready Additional sense indicates Medium not present sda : READ CAPACITY failed. sda : status = 1, message = 00, host = 0, driver = 08 Current sd00:00: sense key Not Ready Additional sense indicates Medium not present sda : block size assumed to be 512 bytes, disk size 1GB. sda: test WP failed, assume Write Enabled sda: I/O error: dev 08:00, sector 0 I/O error: dev 08:00, sector 0 unable to read partition table sda: Unit Not Ready, sense: Current 00:00: sense key Not Ready Additional sense indicates Medium not present sda : READ CAPACITY failed. sda : status = 1, message = 00, host = 0, driver = 08 Current sd00:00: sense key Not Ready Additional sense indicates Medium not present sda : block size assumed to be 512 bytes, disk size 1GB. sda: test WP failed, assume Write Enabled sda: I/O error: dev 08:00, sector 0 I/O error: dev 08:00, sector 0 unable to read partition table sda: Unit Not Ready, sense: Current 00:00: sense key Not Ready Additional sense indicates Medium not present sda : READ CAPACITY failed. sda : status = 1, message = 00, host = 0, driver = 08 Current sd00:00: sense key Not Ready Additional sense indicates Medium not present sda : block size assumed to be 512 bytes, disk size 1GB. sda: test WP failed, assume Write Enabled sda: I/O error: dev 08:00, sector 0 I/O error: dev 08:00, sector 0 unable to read partition table sda: Unit Not Ready, sense: Current 00:00: sense key Not Ready Additional sense indicates Medium not present sda : READ CAPACITY failed. sda : status = 1, message = 00, host = 0, driver = 08 Current sd00:00: sense key Not Ready Additional sense indicates Medium not present sda : block size assumed to be 512 bytes, disk size 1GB. sda: test WP failed, assume Write Enabled sda: I/O error: dev 08:00, sector 0 I/O error: dev 08:00, sector 0 unable to read partition table
Thanks,
...Paul
-- Managing good programmers/engineers is tantamount to herding cats...
