Am Donnerstag 11 Dezember 2003 21:24 schrieb mike webster: > If you're looking for SCSI, go with adaptec. For a simple ide solution > with two drives I'd recommend the Promise TX-2000 card. I've written up > a howto: for the promise card if you'd like the link. > > Mike. > > On Thu, 2003-12-11 at 14:26, Raymond Norton wrote: > > I have decided to do a hardware raid rather than struggle with the > > software raid. What would be a good, inexpensive controller that can do > > raid level 1? when you use SCSI Vortex or Adaptec. when ATA or SATA then use 3ware. 3ware contolleres are seen by linux as a real raid conroller. The promise contoller somtimes show not the raid array but the disk. and when then you try to acces disk disk you can destroy your array.
