Samuel Flory <sflory@xxxxxxxxxxxx> writes:
Do you have a timed transfer to post? You didn't mention if what I
posted was slow or not.
> What does /proc/mount say? What does "mii-tool eth0" or "ethtool
Nothing here:
cat /proc/mount
cat: /proc/mount: No such file or directory
> eth0" say? Are you dropping packets? (ifconfig and ping )
# mii-tool
root # mii-tool
eth0: negotiated 100baseTx-HD, link ok
eth1: no link
# ethtool eth0
Settings for eth0:
Supported ports: [ TP MII ]
Supported link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
Supports auto-negotiation: Yes
Advertised link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
Advertised auto-negotiation: Yes
Speed: 100Mb/s
Duplex: Half
Port: Twisted Pair
PHYAD: 1
Transceiver: internal
Auto-negotiation: on
Supports Wake-on: puag
Wake-on: g
Link detected: yes
ifconfig while making an nsf transfer:
root # ifconfig eth0
eth0 Link encap:Ethernet HWaddr 00:03:47:FA:4B:13
inet addr:192.168.0.4 Bcast:192.168.0.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:2023545 errors:50 dropped:0 overruns:0 frame:50
TX packets:1867748 errors:0 dropped:0 overruns:0 carrier:0
collisions:6765 txqueuelen:100
RX bytes:983047766 (937.5 Mb) TX bytes:454217274 (433.1 Mb)
Interrupt:11 Base address:0xdf00 Memory:ff9fc000-ff9fc038
