Re: [patch 2.6.24-rc4-mm 4/6] gpiolib: create empty drivers/gpio

[Jean Delvare <khali@linux-fr.org>]

Hi David,

On Sun, 9 Dec 2007 20:39:57 -0800, David Brownell wrote:
> From: David Brownell <dbrownell@users.sourceforge.net>
> 
> Add an empty drivers/gpio directory for gpiolib based GPIO expanders.
> We already have three of them (two I2C, one SPI), and there are dozens
> of similar chips that only exist for GPIO expansion.
> 
> This won't be the only place to hold such gpio_chip code.  Many external
> chips add a few GPIOs as secondary functionality, and platform code
> frequently needs to closely integrate GPIO and IRQ support.
> 
> This is placed *early* in the build/link sequence since it's common for
> other drivers to depend on GPIOs to do their work, so they need to be
> initialized early in the device_initcall() sequence.

Note that I foresee potential problems with this. These GPIO drivers
need I2C or SPI to be initialized before they can load. However on some
systems, I2C or SPI buses are hanging off GPIOs, meaning that these
GPIOS need to be initialized before I2C or SPI, respectively. I can
imagine weird setups where for example an SPI bus would be driven by an
I2C-based GPIO chip, or vice-versa. I sure hope that nobody does this,
but you never know... And I'm not sure how we would possibly support
this.

-- 
Jean Delvare
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/