On Sat, 8 Dec 2007, Marco Gatti wrote:
>
> Today, I tested with different amounts of RAM:
>
> 2 GB: everything works fine
> 4 GB: same issue as described before with allocating block in system zone
>
> So what to do, in order to use more than 2 Gigs of RAM?
Was there a dmesg out there somewhere?
With 4G of RAM, you probably have some of it above the 4GB mark (because
of RAM remapping etc, and the PCI decode hole in the low 4GB). It does
sound like this is a DMA problem, and your controller cannot correctly DMA
to the upper 4GB.
So what controller/driver, what's the dmesg, and let's see if we can fix
it by adding a DMA mask to it to limit it to the low 32 bits.
Linus
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
