Here's the info from 2.6.24: dmesg + lsmod + lspci-v + PowerTop:
[ 0.000000] Linux version 2.6.24-rc3-git5 (root@corey) (gcc version 4.1.2 (Ubuntu 4.1.2-0ubuntu4)) #3 SMP PREEMPT Fri Nov 30 22:35:04 EST 2007
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
[ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000bfed3400 (usable)
[ 0.000000] BIOS-e820: 00000000bfed3400 - 00000000c0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4007000 (reserved)
[ 0.000000] BIOS-e820: 00000000f4008000 - 00000000f400c000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed20000 - 00000000feda0000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
[ 0.000000] 2174MB HIGHMEM available.
[ 0.000000] 896MB LOWMEM available.
[ 0.000000] Entering add_active_range(0, 0, 786131) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 229376
[ 0.000000] HighMem 229376 -> 786131
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 786131
[ 0.000000] On node 0 totalpages: 786131
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 1760 pages used for memmap
[ 0.000000] Normal zone: 223520 pages, LIFO batch:31
[ 0.000000] HighMem zone: 4349 pages used for memmap
[ 0.000000] HighMem zone: 552406 pages, LIFO batch:31
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] DMI 2.4 present.
[ 0.000000] ACPI: RSDP 000FC1B0, 0014 (r0 DELL )
[ 0.000000] ACPI: RSDT BFED39CD, 0040 (r1 DELL M07 27D7061B ASL 61)
[ 0.000000] ACPI: FACP BFED4800, 0074 (r1 DELL M07 27D7061B ASL 61)
[ 0.000000] ACPI: DSDT BFED5400, 4841 (r1 INT430 SYSFexxx 1001 INTL 20050624)
[ 0.000000] ACPI: FACS BFEE3C00, 0040
[ 0.000000] ACPI: HPET BFED4F00, 0038 (r1 DELL M07 1 ASL 61)
[ 0.000000] ACPI: APIC BFED5000, 0068 (r1 DELL M07 27D7061B ASL 47)
[ 0.000000] ACPI: MCFG BFED4FC0, 003E (r16 DELL M07 27D7061B ASL 61)
[ 0.000000] ACPI: SLIC BFED509C, 0176 (r1 DELL M07 27D7061B ASL 61)
[ 0.000000] ACPI: BOOT BFED4BC0, 0028 (r1 DELL M07 27D7061B ASL 61)
[ 0.000000] ACPI: SSDT BFED3A0D, 04DC (r1 PmRef CpuPm 3000 INTL 20050624)
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 6:15 APIC version 20
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] Processor #1 6:15 APIC version 20
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at c4000000 (gap: c0000000:30000000)
[ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 0000000000100000
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 779990
[ 0.000000] Kernel command line: root=/dev/sda1 ro resume=/dev/sda3 vga=ext sysrq_always_enabled
[ 0.000000] debug: sysrq always enabled.
[ 0.000000] mapped APIC to ffffb000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffa000 (fec00000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] CPU 0 irqstacks, hard=c038a000 soft=c0388000
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Detected 2161.420 MHz processor.
[ 6.428240] Console: colour VGA+ 80x50
[ 6.428243] console [tty0] enabled
[ 6.434703] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 6.435082] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 6.571914] Memory: 3114916k/3144524k available (1666k kernel code, 28492k reserved, 708k data, 188k init, 2227020k highmem)
[ 6.572067] virtual kernel memory layout:
[ 6.572068] fixmap : 0xfff9b000 - 0xfffff000 ( 400 kB)
[ 6.572069] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 6.572069] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
[ 6.572070] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
[ 6.572071] .init : 0xc0356000 - 0xc0385000 ( 188 kB)
[ 6.572072] .data : 0xc02a0a76 - 0xc0351c00 ( 708 kB)
[ 6.572073] .text : 0xc0100000 - 0xc02a0a76 (1666 kB)
[ 6.572993] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 6.573258] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
[ 6.573525] hpet clockevent registered
[ 6.656724] Calibrating delay using timer specific routine.. 4327.37 BogoMIPS (lpj=7210194)
[ 6.656979] Mount-cache hash table entries: 512
[ 6.657216] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001 00000000
[ 6.657222] monitor/mwait feature present.
[ 6.657336] using mwait in idle threads.
[ 6.657452] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 6.657650] CPU: L2 cache: 4096K
[ 6.657765] CPU: Physical Processor ID: 0
[ 6.657879] CPU: Processor Core ID: 0
[ 6.657993] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e3bd 00000000 00000001 00000000
[ 6.658001] Compat vDSO mapped to ffffe000.
[ 6.658125] Checking 'hlt' instruction... OK.
[ 6.670306] SMP alternatives: switching to UP code
[ 6.670903] ACPI: Core revision 20070126
[ 6.673425] CPU0: Intel(R) Core(TM)2 CPU T7400 @ 2.16GHz stepping 06
[ 6.673723] SMP alternatives: switching to SMP code
[ 6.674136] Booting processor 1/1 eip 3000
[ 6.674249] CPU 1 irqstacks, hard=c038b000 soft=c0389000
[ 8.564513] Initializing CPU#1
[ 8.644461] Calibrating delay using timer specific routine.. 4324.62 BogoMIPS (lpj=7204193)
[ 8.644467] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001 00000000
[ 8.644471] monitor/mwait feature present.
[ 8.644473] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 8.644475] CPU: L2 cache: 4096K
[ 8.644476] CPU: Physical Processor ID: 0
[ 8.644477] CPU: Processor Core ID: 1
[ 8.644478] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e3bd 00000000 00000001 00000000
[ 6.767099] CPU1: Intel(R) Core(TM)2 CPU T7400 @ 2.16GHz stepping 06
[ 6.768198] Total of 2 processors activated (8652.99 BogoMIPS).
[ 6.768508] ENABLING IO-APIC IRQs
[ 6.768805] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 6.906377] checking TSC synchronization [CPU#0 -> CPU#1]:
[ 6.926547] Measured 4065529416 cycles TSC warp between CPUs, turning off TSC clock.
[ 6.926687] Marking TSC unstable due to: check_tsc_sync_source failed.
[ 6.926809] Brought up 2 CPUs
[ 6.927051] net_namespace: 64 bytes
[ 6.927439] NET: Registered protocol family 16
[ 6.927666] ACPI: bus type pci registered
[ 6.927837] PCI: Using MMCONFIG
[ 6.928704] Setting up standard PCI resources
[ 6.933401] ACPI: EC: Look up EC in DSDT
[ 6.936970] ACPI: Interpreter enabled
[ 6.937081] ACPI: (supports S0 S3 S4 S5)
[ 6.937538] ACPI: Using IOAPIC for interrupt routing
[ 6.950219] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 6.950910] PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
[ 6.951026] PCI quirk: region 1080-10bf claimed by ICH6 GPIO
[ 6.952318] PCI: Transparent bridge - 0000:00:1e.0
[ 6.952491] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 6.952806] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
[ 6.952879] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT]
[ 6.952996] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 6.953084] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[ 6.953169] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
[ 6.959511] ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 11) *4
[ 6.960230] ACPI: PCI Interrupt Link [LNKB] (IRQs *5 7)
[ 6.960762] ACPI: PCI Interrupt Link [LNKC] (IRQs *9 10 11)
[ 6.961377] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 9 10 11) *3
[ 6.962246] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[ 6.963557] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[ 6.964868] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[ 6.966181] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 9 10 11 12 14 15)
[ 6.967525] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 6.967656] pnp: PnP ACPI init
[ 6.967772] ACPI: bus type pnp registered
[ 6.981084] pnpacpi: exceeded the max number of mem resources: 12
[ 6.981200] pnpacpi: exceeded the max number of mem resources: 12
[ 6.981314] pnpacpi: exceeded the max number of mem resources: 12
[ 6.981429] pnpacpi: exceeded the max number of mem resources: 12
[ 6.981544] pnpacpi: exceeded the max number of mem resources: 12
[ 6.981658] pnpacpi: exceeded the max number of mem resources: 12
[ 6.991731] pnp: PnP ACPI: found 12 devices
[ 6.991844] ACPI: ACPI bus type pnp unregistered
[ 6.992080] SCSI subsystem initialized
[ 6.992214] libata version 3.00 loaded.
[ 6.992298] PCI: Using ACPI for IRQ routing
[ 6.992411] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 7.002826] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 7.003277] hpet0: 3 64-bit timers, 14318180 Hz
[ 7.004413] ACPI: RTC can wake from S4
[ 7.006131] Time: hpet clocksource has been installed.
[ 7.006253] Switched to high resolution mode on CPU 0
[ 8.884597] Switched to high resolution mode on CPU 1
[ 7.012838] system 00:00: iomem range 0x0-0x9fbff could not be reserved
[ 7.012954] system 00:00: iomem range 0x9fc00-0x9ffff could not be reserved
[ 7.013071] system 00:00: iomem range 0xc0000-0xcffff could not be reserved
[ 7.013187] system 00:00: iomem range 0xe0000-0xfffff could not be reserved
[ 7.013303] system 00:00: iomem range 0x100000-0xbfed33ff could not be reserved
[ 7.013444] system 00:00: iomem range 0xbfed3400-0xbfefffff could not be reserved
[ 7.013585] system 00:00: iomem range 0xbff00000-0xbfffffff could not be reserved
[ 7.013730] system 00:00: iomem range 0xffb00000-0xffffffff could not be reserved
[ 7.013872] system 00:00: iomem range 0xfec00000-0xfec0ffff could not be reserved
[ 7.014013] system 00:00: iomem range 0xfee00000-0xfee0ffff could not be reserved
[ 7.014154] system 00:00: iomem range 0xfed20000-0xfed9ffff could not be reserved
[ 7.014296] system 00:00: iomem range 0xffa80000-0xffa83fff could not be reserved
[ 7.014440] system 00:02: ioport range 0x4d0-0x4d1 has been reserved
[ 7.014555] system 00:02: ioport range 0x1000-0x1005 has been reserved
[ 7.014671] system 00:02: ioport range 0x1008-0x100f has been reserved
[ 7.014789] system 00:03: ioport range 0xf400-0xf4fe has been reserved
[ 7.014905] system 00:03: ioport range 0x1006-0x1007 has been reserved
[ 7.015021] system 00:03: ioport range 0x100a-0x1059 could not be reserved
[ 7.015136] system 00:03: ioport range 0x1060-0x107f has been reserved
[ 7.015251] system 00:03: ioport range 0x1080-0x10bf has been reserved
[ 7.015366] system 00:03: ioport range 0x10c0-0x10df has been reserved
[ 7.015481] system 00:03: ioport range 0x1010-0x102f has been reserved
[ 7.015596] system 00:03: ioport range 0x809-0x809 has been reserved
[ 7.015715] system 00:08: ioport range 0xc80-0xcff could not be reserved
[ 7.015830] system 00:08: ioport range 0x910-0x91f has been reserved
[ 7.017073] system 00:08: ioport range 0x920-0x92f has been reserved
[ 7.017188] system 00:08: ioport range 0xcb0-0xcbf has been reserved
[ 7.017303] system 00:08: ioport range 0x930-0x97f has been reserved
[ 7.017421] system 00:0b: iomem range 0xfed00000-0xfed003ff has been reserved
[ 7.047781] PCI: Bridge: 0000:00:01.0
[ 7.047894] IO window: e000-efff
[ 7.048006] MEM window: efd00000-efefffff
[ 7.048118] PREFETCH window: d0000000-dfffffff
[ 7.048232] PCI: Bridge: 0000:00:1c.0
[ 7.048343] IO window: disabled.
[ 7.048457] MEM window: disabled.
[ 7.048570] PREFETCH window: disabled.
[ 7.048685] PCI: Bridge: 0000:00:1c.1
[ 7.048796] IO window: disabled.
[ 7.048911] MEM window: efc00000-efcfffff
[ 7.049025] PREFETCH window: disabled.
[ 7.049139] PCI: Bridge: 0000:00:1c.3
[ 7.049252] IO window: d000-dfff
[ 7.049367] MEM window: efa00000-efbfffff
[ 7.049486] PREFETCH window: e0000000-e01fffff
[ 7.049602] PCI: Bridge: 0000:00:1e.0
[ 7.049714] IO window: disabled.
[ 7.049828] MEM window: ef900000-ef9fffff
[ 7.049942] PREFETCH window: disabled.
[ 7.050064] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 7.050293] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 7.050310] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 7.050536] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 7.050554] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 17
[ 7.050780] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 7.050798] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 18
[ 7.051024] PCI: Setting latency timer of device 0000:00:1c.3 to 64
[ 7.051034] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 7.051041] NET: Registered protocol family 2
[ 7.079403] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 7.079689] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 7.080215] TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
[ 7.080623] TCP: Hash tables configured (established 131072 bind 65536)
[ 7.080739] TCP reno registered
[ 7.089515] Simple Boot Flag at 0x79 set to 0x1
[ 8.968226] highmem bounce pool size: 64 pages
[ 8.968445] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 8.968586] io scheduler noop registered
[ 8.968698] io scheduler anticipatory registered
[ 8.968810] io scheduler cfq registered (default)
[ 8.969015] Boot video device is 0000:01:00.0
[ 8.969096] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 8.969112] assign_interrupt_mode Found MSI capability
[ 8.969226] Allocate Port Service[0000:00:01.0:pcie00]
[ 8.969256] Allocate Port Service[0000:00:01.0:pcie03]
[ 8.969306] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 8.969351] assign_interrupt_mode Found MSI capability
[ 8.969465] Allocate Port Service[0000:00:1c.0:pcie00]
[ 8.969492] Allocate Port Service[0000:00:1c.0:pcie02]
[ 8.969521] Allocate Port Service[0000:00:1c.0:pcie03]
[ 8.969601] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 8.969647] assign_interrupt_mode Found MSI capability
[ 8.969760] Allocate Port Service[0000:00:1c.1:pcie00]
[ 8.969788] Allocate Port Service[0000:00:1c.1:pcie02]
[ 8.969815] Allocate Port Service[0000:00:1c.1:pcie03]
[ 8.969895] PCI: Setting latency timer of device 0000:00:1c.3 to 64
[ 8.969941] assign_interrupt_mode Found MSI capability
[ 8.970054] Allocate Port Service[0000:00:1c.3:pcie00]
[ 8.970087] Allocate Port Service[0000:00:1c.3:pcie02]
[ 8.970115] Allocate Port Service[0000:00:1c.3:pcie03]
[ 8.987532] hpet_resources: 0xfed00000 is busy
[ 8.987577] Generic RTC Driver v1.07
[ 8.987718] Serial: 8250/16550 driver $Revision: 1.90 $ 2 ports, IRQ sharing disabled
[ 8.988156] RAMDISK driver initialized: 4 RAM disks of 8192K size 1024 blocksize
[ 8.988376] ata_piix 0000:00:1f.2: version 2.12
[ 8.988382] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
[ 8.988852] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 17 (level, low) -> IRQ 17
[ 8.989103] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 8.989154] scsi0 : ata_piix
[ 8.989315] scsi1 : ata_piix
[ 8.989574] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xbfa0 irq 14
[ 8.989690] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xbfa8 irq 15
[ 7.269512] ata1.00: ATA-7: ST9160823AS, 3.AAB, max UDMA/133
[ 7.269627] ata1.00: 312581808 sectors, multi 8: LBA48 NCQ (depth 0/32)
[ 7.282831] ata1.00: configured for UDMA/133
[ 7.595645] ata2.00: ATAPI: SONY DVD RW DW-Q58A, UYS2, max UDMA/33
[ 7.761978] ata2.00: configured for UDMA/33
[ 9.640101] scsi 0:0:0:0: Direct-Access ATA ST9160823AS 3.AA PQ: 0 ANSI: 5
[ 9.640341] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[ 9.640464] sd 0:0:0:0: [sda] Write Protect is off
[ 9.640577] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 9.640589] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 9.640764] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[ 9.640885] sd 0:0:0:0: [sda] Write Protect is off
[ 9.640999] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 9.641010] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 9.641152] sda: sda1 sda2 sda3
[ 7.768479] sd 0:0:0:0: [sda] Attached SCSI disk
[ 7.769266] scsi 1:0:0:0: CD-ROM SONY DVD RW DW-Q58A UYS2 PQ: 0 ANSI: 5
[ 7.769578] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 7.772487] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 7.772603] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 7.772840] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[ 7.772992] rtc0: alarms up to one month, y3k
[ 7.773129] cpuidle: using governor ladder
[ 7.773243] cpuidle: using governor menu
[ 7.773399] TCP cubic registered
[ 7.773512] Using IPI No-Shortcut mode
[ 7.775248] input: AT Translated Set 2 keyboard as /class/input/input0
[ 7.800680] rtc_cmos 00:06: setting system clock to 2007-12-02 15:31:19 UTC (1196609479)
[ 7.940157] EXT3-fs: mounted filesystem with ordered data mode.
[ 7.940275] VFS: Mounted root (ext3 filesystem) readonly.
[ 7.940484] Freeing unused kernel memory: 188k freed
[ 7.940659] kjournald starting. Commit interval 5 seconds
[ 8.538899] NET: Registered protocol family 1
[ 16.854771] ACPI: SSDT BFED4134, 0244 (r1 PmRef Cpu0Ist 3000 INTL 20050624)
[ 16.855251] ACPI: SSDT BFED3EE9, 01C6 (r1 PmRef Cpu0Cst 3001 INTL 20050624)
[ 16.855962] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 16.856414] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 16.856868] ACPI: SSDT BFED4378, 00C4 (r1 PmRef Cpu1Ist 3000 INTL 20050624)
[ 16.857308] ACPI: SSDT BFED40AF, 0085 (r1 PmRef Cpu1Cst 3000 INTL 20050624)
[ 16.858037] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
[ 16.858493] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 16.896878] input: Lid Switch as /class/input/input1
[ 16.927170] ACPI: Lid Switch [LID]
[ 16.927329] input: Power Button (CM) as /class/input/input2
[ 16.976666] ACPI: Power Button (CM) [PBTN]
[ 16.976830] input: Sleep Button (CM) as /class/input/input3
[ 17.023244] ACPI: Sleep Button (CM) [SBTN]
[ 17.028529] ACPI: Thermal Zone [THM] (50 C)
[ 17.067787] Linux agpgart interface v0.102
[ 17.139916] ACPI: AC Adapter [AC] (on-line)
[ 17.170598] usbcore: registered new interface driver usbfs
[ 17.170739] usbcore: registered new interface driver hub
[ 17.171013] usbcore: registered new device driver usb
[ 17.224823] intel_rng: FWH not detected
[ 17.250299] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 17.250438] scsi 1:0:0:0: Attached scsi generic sg1 type 5
[ 17.284638] ricoh-mmc: Ricoh MMC Controller disabling driver
[ 17.284761] ricoh-mmc: Copyright(c) Philip Langdale
[ 17.284903] ricoh-mmc: Ricoh MMC controller found at 0000:03:01.2 [1180:0843] (rev 1)
[ 17.285059] ricoh-mmc: Controller is now disabled.
[ 17.349704] ACPI: Battery Slot [BAT0] (battery present)
[ 19.227656] input: PC Speaker as /class/input/input4
[ 17.395011] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[ 17.395130] Uniform CD-ROM driver Revision: 3.20
[ 17.395270] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 17.406827] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 17.422358] USB Universal Host Controller Interface driver v3.0
[ 17.422503] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 19
[ 17.422735] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 17.422738] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 17.423086] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 17.423260] uhci_hcd 0000:00:1d.0: irq 19, io base 0x0000bf80
[ 17.423491] usb usb1: configuration #1 chosen from 1 choice
[ 17.423637] hub 1-0:1.0: USB hub found
[ 17.423754] hub 1-0:1.0: 2 ports detected
[ 17.436471] sdhci: Secure Digital Host Controller Interface driver
[ 17.436605] sdhci: Copyright(c) Pierre Ossman
[ 17.456802] b44.c:v2.0
[ 17.473656] eth0: Broadcom 44xx/47xx 10/100BaseT Ethernet 00:18:8b:a7:bf:42
[ 17.523397] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 21 (level, low) -> IRQ 20
[ 17.523631] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 17.523635] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 17.523767] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[ 17.523933] uhci_hcd 0000:00:1d.1: irq 20, io base 0x0000bf60
[ 17.524139] usb usb2: configuration #1 chosen from 1 choice
[ 17.524275] hub 2-0:1.0: USB hub found
[ 17.524390] hub 2-0:1.0: 2 ports detected
[ 17.626557] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 22 (level, low) -> IRQ 21
[ 17.626866] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 17.626870] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 17.627042] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[ 17.627215] uhci_hcd 0000:00:1d.2: irq 21, io base 0x0000bf40
[ 17.627425] usb usb3: configuration #1 chosen from 1 choice
[ 17.627560] hub 3-0:1.0: USB hub found
[ 17.627675] hub 3-0:1.0: 2 ports detected
[ 17.714196] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 23 (level, low) -> IRQ 22
[ 17.714425] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[ 17.714428] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 17.714561] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[ 17.714760] uhci_hcd 0000:00:1d.3: irq 22, io base 0x0000bf20
[ 17.714973] usb usb4: configuration #1 chosen from 1 choice
[ 17.715107] hub 4-0:1.0: USB hub found
[ 17.715237] hub 4-0:1.0: 2 ports detected
[ 19.594226] usb 1-1: new full speed USB device using uhci_hcd and address 2
[ 17.722985] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 21 (level, low) -> IRQ 20
[ 17.723247] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 17.731372] usb 1-1: configuration #1 chosen from 1 choice
[ 17.731695] hub 1-1:1.0: USB hub found
[ 17.732375] hub 1-1:1.0: 4 ports detected
[ 17.751024] Synaptics Touchpad, model: 1, fw: 6.2, id: 0xfa0b1, caps: 0xa04713/0x200000
[ 17.757327] input: SynPS/2 Synaptics TouchPad as /class/input/input5
[ 17.775633] mice: PS/2 mouse device common for all mice
[ 19.670449] sdhci: SDHCI controller found at 0000:03:01.1 [1180:0822] (rev 19)
[ 19.670612] ACPI: PCI Interrupt 0000:03:01.1[B] -> GSI 18 (level, low) -> IRQ 23
[ 19.670888] mmc0: SDHCI at 0xef9fd400 irq 23 DMA
[ 17.793175] ACPI: PCI Interrupt 0000:03:01.0[A] -> GSI 19 (level, low) -> IRQ 18
[ 17.793443] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 19
[ 17.793662] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 17.793665] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 17.793801] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
[ 17.797847] ehci_hcd 0000:00:1d.7: debug port 1
[ 17.797964] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[ 17.797968] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xffa80000
[ 17.865404] usb 3-1: new full speed USB device using uhci_hcd and address 2
[ 19.744154] firewire_ohci: Added fw-ohci device 0000:03:01.0, OHCI version 1.10
[ 17.875381] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 17.875636] usb usb5: configuration #1 chosen from 1 choice
[ 17.875771] hub 5-0:1.0: USB hub found
[ 17.875887] hub 5-0:1.0: 8 ports detected
[ 17.927015] hub 1-1:1.0: hub_port_status failed (err = -71)
[ 17.928236] hub 1-1:1.0: hub_port_status failed (err = -71)
[ 17.929010] hub 1-1:1.0: hub_port_status failed (err = -71)
[ 17.930009] hub 1-1:1.0: hub_port_status failed (err = -71)
[ 17.930143] usb 1-1: USB disconnect, address 2
[ 18.094628] fuse init (API version 7.9)
[ 18.126244] usb 5-1: new high speed USB device using ehci_hcd and address 2
[ 18.127911] NET: Registered protocol family 17
[ 18.141750] firewire_core: created new fw device fw0 (0 config rom retries, S400)
[ 18.154281] usb 5-1: configuration #1 chosen from 1 choice
[ 18.154569] hub 5-1:1.0: USB hub found
[ 18.154799] hub 5-1:1.0: 4 ports detected
[ 18.404165] usb 5-5: new high speed USB device using ehci_hcd and address 3
[ 18.528823] usb 5-5: configuration #1 chosen from 1 choice
[ 20.408571] hub 5-5:1.0: USB hub found
[ 20.409039] hub 5-5:1.0: 4 ports detected
[ 18.823757] usb 5-5.1: new low speed USB device using ehci_hcd and address 4
[ 18.911379] usb 5-5.1: configuration #1 chosen from 1 choice
[ 20.792148] usbcore: registered new interface driver usbserial
[ 20.792278] drivers/usb/serial/usb-serial.c: USB Serial support registered for generic
[ 20.792438] usbcore: registered new interface driver usbserial_generic
[ 20.792553] drivers/usb/serial/usb-serial.c: USB Serial Driver core
[ 20.802099] drivers/usb/serial/usb-serial.c: USB Serial support registered for Handspring Visor / Palm OS
[ 20.802256] drivers/usb/serial/usb-serial.c: USB Serial support registered for Sony Clie 3.5
[ 20.802414] drivers/usb/serial/usb-serial.c: USB Serial support registered for Sony Clie 5.0
[ 20.802572] usbcore: registered new interface driver visor
[ 20.802686] drivers/usb/serial/visor.c: USB HandSpring Visor / Palm OS driver
[ 18.979647] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 18.984069] pciehp: HPC vendor_id 8086 device_id 27d0 ss_vid 0 ss_did 0
[ 18.984763] Load service driver hpdriver on pcie device 0000:00:1c.0:pcie02
[ 18.984779] pciehp: HPC vendor_id 8086 device_id 27d2 ss_vid 0 ss_did 0
[ 19.003648] usbcore: registered new interface driver hiddev
[ 19.005605] input: Logitech Optical USB Mouse as /class/input/input6
[ 19.023185] input,hidraw0: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:1d.7-5.1
[ 19.023671] usbcore: registered new interface driver usbhid
[ 19.023785] drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[ 19.984937] pciehp: Device 0000:0c:00.0 already exists at c:0, cannot hot-add
[ 19.985057] pciehp: Cannot add device 0xc:0
[ 19.985177] Load service driver hpdriver on pcie device 0000:00:1c.1:pcie02
[ 19.985199] pciehp: HPC vendor_id 8086 device_id 27d6 ss_vid 0 ss_did 0
[ 19.985350] Load service driver hpdriver on pcie device 0000:00:1c.3:pcie02
[ 19.985356] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 21.880534] Adding 2064344k swap on /dev/sda3. Priority:-1 extents:1 across:2064344k
[ 20.110616] EXT3 FS on sda1, internal journal
[ 20.272818] kjournald starting. Commit interval 5 seconds
[ 20.272974] EXT3 FS on sda2, internal journal
[ 20.272978] EXT3-fs: mounted filesystem with ordered data mode.
[ 22.176681] b44: eth0: Link is up at 100 Mbps, full duplex.
[ 22.176683] b44: eth0: Flow control is off for TX and off for RX.
[ 24.802846] IA-32 Microcode Update Driver: v1.14a <[email protected]>
[ 27.078916] RPC: Registered udp transport module.
[ 27.078922] RPC: Registered tcp transport module.
[ 27.133817] Installing knfsd (copyright (C) 1996 [email protected]).
[ 27.233003] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[ 27.233578] NFSD: starting 90-second grace period
[ 27.904761] Bluetooth: Core ver 2.11
[ 27.904849] NET: Registered protocol family 31
[ 27.904852] Bluetooth: HCI device and connection manager initialized
[ 27.904858] Bluetooth: HCI socket layer initialized
[ 27.948472] Bluetooth: L2CAP ver 2.9
[ 27.948703] Bluetooth: L2CAP socket layer initialized
[ 28.082302] Bluetooth: RFCOMM socket layer initialized
[ 28.082317] Bluetooth: RFCOMM TTY layer initialized
[ 28.082320] Bluetooth: RFCOMM ver 1.8
[ 31.691604] IA-32 Microcode Update Driver: v1.14a <[email protected]>
Module Size Used by
microcode 10356 0
binfmt_misc 11336 1
rfcomm 37136 5
l2cap 23168 5 rfcomm
bluetooth 53476 4 rfcomm,l2cap
nfs 236684 0
nfsd 204848 19
lockd 60936 3 nfs,nfsd
nfs_acl 3392 2 nfs,nfsd
auth_rpcgss 41120 1 nfsd
sunrpc 171996 17 nfs,nfsd,lockd,nfs_acl,auth_rpcgss
exportfs 4672 1 nfsd
acpi_cpufreq 8916 1
cpufreq_stats 5776 0
cpufreq_userspace 4012 0
cpufreq_conservative 7496 0
cpufreq_powersave 1728 0
container 4736 0
fan 4484 0
firmware_class 9472 1 microcode
usbhid 28224 0
pciehp 34968 0
pci_hotplug 13960 1 pciehp
hid 33408 1 usbhid
visor 16908 0
af_packet 20932 2
usbserial 32808 1 visor
fuse 45204 1
firewire_sbp2 14220 0
mousedev 13128 1
snd_hda_intel 275036 4
snd_pcm_oss 36064 0
snd_pcm 66116 3 snd_hda_intel,snd_pcm_oss
snd_mixer_oss 15296 1 snd_pcm_oss
snd_seq_dummy 3652 0
snd_seq_oss 29504 0
snd_seq_midi 8032 0
snd_rawmidi 22496 1 snd_seq_midi
snd_seq_midi_event 6848 2 snd_seq_oss,snd_seq_midi
snd_seq 46800 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
snd_timer 21124 3 snd_pcm,snd_seq
snd_seq_device 7692 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
firewire_ohci 16576 0
serio_raw 6532 0
firewire_core 39168 2 firewire_sbp2,firewire_ohci
sdhci 17028 0
ehci_hcd 32908 0
uhci_hcd 23116 0
b44 25168 0
ssb 26692 1 b44
sr_mod 15588 0
cdrom 32416 1 sr_mod
snd 48996 15 snd_hda_intel,snd_pcm_oss,snd_pcm,snd_mixer_oss,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
psmouse 29640 0
pcspkr 2944 0
battery 13316 0
ricoh_mmc 3328 0
crc_itu_t 2048 1 firewire_core
mmc_core 47044 1 sdhci
sg 34128 0
mii 5184 1 b44
soundcore 7840 1 snd
snd_page_alloc 9928 2 snd_hda_intel,snd_pcm
usbcore 133740 6 usbhid,visor,usbserial,ehci_hcd,uhci_hcd
ac 6020 0
power_supply 8452 2 battery,ac
intel_agp 23252 0
agpgart 31564 1 intel_agp
thermal 15900 0
button 8272 0
processor 36032 4 acpi_cpufreq,thermal
unix 26544 366
00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS/940GML and 945GT Express Memory Controller Hub (rev 03)
Subsystem: Dell Unknown device 01cd
Flags: bus master, fast devsel, latency 0
Capabilities: [e0] Vendor Specific Information
00:01.0 PCI bridge: Intel Corporation Mobile 945GM/PM/GMS/940GML and 945GT Express PCI Express Root Port (rev 03) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: efd00000-efefffff
Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff
Capabilities: [88] Subsystem: Dell Unknown device 01cd
Capabilities: [80] Power Management version 2
Capabilities: [90] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable-
Capabilities: [a0] Express Root Port (Slot+) IRQ 0
Capabilities: [100] Virtual Channel
Capabilities: [140] Unknown (5)
00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 01)
Subsystem: Dell Unknown device 01cd
Flags: bus master, fast devsel, latency 0, IRQ 20
Memory at efffc000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 2
Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
Capabilities: [70] Express Unknown type IRQ 0
Capabilities: [100] Virtual Channel
Capabilities: [130] Unknown (5)
00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 01) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=0b, subordinate=0b, sec-latency=0
Capabilities: [40] Express Root Port (Slot+) IRQ 0
Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable-
Capabilities: [90] Subsystem: Dell Unknown device 01cd
Capabilities: [a0] Power Management version 2
Capabilities: [100] Virtual Channel
Capabilities: [180] Unknown (5)
00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 (rev 01) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=0c, subordinate=0c, sec-latency=0
Memory behind bridge: efc00000-efcfffff
Capabilities: [40] Express Root Port (Slot+) IRQ 0
Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable-
Capabilities: [90] Subsystem: Dell Unknown device 01cd
Capabilities: [a0] Power Management version 2
Capabilities: [100] Virtual Channel
Capabilities: [180] Unknown (5)
00:1c.3 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 4 (rev 01) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=0d, subordinate=0e, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: efa00000-efbfffff
Prefetchable memory behind bridge: 00000000e0000000-00000000e01fffff
Capabilities: [40] Express Root Port (Slot+) IRQ 0
Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable-
Capabilities: [90] Subsystem: Dell Unknown device 01cd
Capabilities: [a0] Power Management version 2
Capabilities: [100] Virtual Channel
Capabilities: [180] Unknown (5)
00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #1 (rev 01) (prog-if 00 [UHCI])
Subsystem: Dell Unknown device 01cd
Flags: bus master, medium devsel, latency 0, IRQ 19
I/O ports at bf80 [size=32]
00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #2 (rev 01) (prog-if 00 [UHCI])
Subsystem: Dell Unknown device 01cd
Flags: bus master, medium devsel, latency 0, IRQ 20
I/O ports at bf60 [size=32]
00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #3 (rev 01) (prog-if 00 [UHCI])
Subsystem: Dell Unknown device 01cd
Flags: bus master, medium devsel, latency 0, IRQ 21
I/O ports at bf40 [size=32]
00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #4 (rev 01) (prog-if 00 [UHCI])
Subsystem: Dell Unknown device 01cd
Flags: bus master, medium devsel, latency 0, IRQ 22
I/O ports at bf20 [size=32]
00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 01) (prog-if 20 [EHCI])
Subsystem: Dell Unknown device 01cd
Flags: bus master, medium devsel, latency 0, IRQ 19
Memory at ffa80000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Capabilities: [58] Debug port
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e1) (prog-if 01 [Subtractive decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=03, subordinate=03, sec-latency=32
Memory behind bridge: ef900000-ef9fffff
Capabilities: [50] Subsystem: Dell Unknown device 01cd
00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 01)
Subsystem: Dell Unknown device 01cd
Flags: bus master, medium devsel, latency 0
Capabilities: [e0] Vendor Specific Information
00:1f.2 IDE interface: Intel Corporation 82801GBM/GHM (ICH7 Family) Serial ATA Storage Controller IDE (rev 01) (prog-if 80 [Master])
Subsystem: Dell Unknown device 01cd
Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 17
I/O ports at 01f0 [size=8]
I/O ports at 03f4 [size=1]
I/O ports at 0170 [size=8]
I/O ports at 0374 [size=1]
I/O ports at bfa0 [size=16]
Capabilities: [70] Power Management version 2
00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 01)
Subsystem: Dell Unknown device 01cd
Flags: medium devsel, IRQ 5
I/O ports at 10c0 [size=32]
01:00.0 VGA compatible controller: ATI Technologies Inc Radeon Mobility X1400 (prog-if 00 [VGA])
Subsystem: Dell Unknown device 2002
Flags: bus master, fast devsel, latency 0, IRQ 4
Memory at d0000000 (32-bit, prefetchable) [size=256M]
I/O ports at ee00 [size=256]
Memory at efdf0000 (32-bit, non-prefetchable) [size=64K]
Expansion ROM at efe00000 [disabled] [size=128K]
Capabilities: [50] Power Management version 2
Capabilities: [58] Express Legacy Endpoint IRQ 0
03:00.0 Ethernet controller: Broadcom Corporation BCM4401-B0 100Base-TX (rev 02)
Subsystem: Dell Unknown device 01cd
Flags: bus master, fast devsel, latency 64, IRQ 17
Memory at ef9fe000 (32-bit, non-prefetchable) [size=8K]
Capabilities: [40] Power Management version 2
03:01.0 FireWire (IEEE 1394): Ricoh Co Ltd Unknown device 0832 (prog-if 10 [OHCI])
Subsystem: Dell Unknown device 01cd
Flags: bus master, medium devsel, latency 64, IRQ 18
Memory at ef9fd800 (32-bit, non-prefetchable) [size=2K]
Capabilities: [dc] Power Management version 2
03:01.1 Generic system peripheral [0805]: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 19) (prog-if 01)
Subsystem: Dell Unknown device 01cd
Flags: bus master, medium devsel, latency 64, IRQ 23
Memory at ef9fd400 (32-bit, non-prefetchable) [size=256]
Capabilities: [80] Power Management version 2
03:01.2 System peripheral: Ricoh Co Ltd Unknown device 0843 (rev 0a)
Subsystem: Dell Unknown device 01cd
Flags: medium devsel, IRQ 9
Memory at ef9fd500 (32-bit, non-prefetchable) [size=256]
Capabilities: [80] Power Management version 2
03:01.3 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 05)
Subsystem: Dell Unknown device 01cd
Flags: medium devsel, IRQ 9
Memory at ef9fd600 (32-bit, non-prefetchable) [size=256]
Capabilities: [80] Power Management version 2
03:01.4 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev ff) (prog-if ff)
!!! Unknown header type 7f
0c:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG Network Connection (rev 02)
Subsystem: Intel Corporation Unknown device 1000
Flags: bus master, fast devsel, latency 0, IRQ 5
Memory at efcff000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [c8] Power Management version 2
Capabilities: [d0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
Capabilities: [e0] Express Legacy Endpoint IRQ 0
Capabilities: [100] Advanced Error Reporting
Capabilities: [140] Device Serial Number 6f-5e-72-ff-ff-d2-19-00
PowerTop:
Cn Avg residency P-states (frequencies)
C0 (cpu running) ( 1.9%) 2.17 Ghz 0.0%
C1 0.0ms ( 0.0%) 1.67 Ghz 0.0%
C2 0.1ms ( 0.0%) 1333 Mhz 0.0%
C3 6.9ms (98.0%) 1000 Mhz 100.0%
Wakeups-from-idle per second : 142.9 interval: 5.0s
no ACPI power usage estimate available
Top causes for wakeups:
36.3% ( 47.0) <interrupt> : uhci_hcd:usb2, HDA Intel
10.2% ( 13.2) kicker : schedule_timeout (process_timeout)
8.8% ( 11.4) <kernel IPI> : Rescheduling interrupts
7.9% ( 10.2) Xorg : do_setitimer (it_real_fn)
7.7% ( 10.0) <kernel module> : ehci_work (ehci_watchdog)
7.3% ( 9.4) <interrupt> : extra timer interrupt
6.8% ( 8.8) artsd : schedule_timeout (process_timeout)
3.7% ( 4.8) dhcdbd : schedule_timeout (process_timeout)
1.5% ( 2.0) <interrupt> : libata
1.5% ( 2.0) passkey-agent : schedule_timeout (process_timeout)
0.8% ( 1.0) artsd : do_setitimer (it_real_fn)
0.8% ( 1.0) klipper : schedule_timeout (process_timeout)
0.8% ( 1.0) ntpd : do_setitimer (it_real_fn)
0.8% ( 1.0) atieventsd : schedule_timeout (process_timeout)
0.8% ( 1.0) kwrapper : do_nanosleep (hrtimer_wakeup)
0.8% ( 1.0) ifconfig : b44_open (b44_timer)
0.5% ( 0.6) gpm : do_nanosleep (hrtimer_wakeup)
0.3% ( 0.4) Xorg : schedule_timeout (process_timeout)
0.3% ( 0.4) kded : schedule_timeout (process_timeout)
0.3% ( 0.4) kmix : schedule_timeout (process_timeout)
0.2% ( 0.2) <interrupt> : PS/2 keyboard/mouse/touchpad
0.2% ( 0.2) konsole : schedule_timeout (process_timeout)
0.2% ( 0.2) guidance-power- : schedule_timeout (process_timeout)
0.2% ( 0.2) <kernel core> : clocksource_register (clocksource_watchdog)
0.2% ( 0.2) <kernel core> : neigh_table_init_no_netlink (neigh_periodic_timer)
0.2% ( 0.2) kio_uiserver : schedule_timeout (process_timeout)
0.2% ( 0.2) <kernel module> : nfsacl_decode (delayed_work_timer_fn)
0.2% ( 0.2) rpc.idmapd : schedule_timeout (process_timeout)
0.2% ( 0.2) kwin : schedule_timeout (process_timeout)
0.2% ( 0.2) <kernel core> : ip_rt_init (delayed_work_timer_fn)
0.2% ( 0.2) katapult : schedule_timeout (process_timeout)
0.2% ( 0.2) <kernel core> : __netdev_watchdog_up (dev_watchdog)
0.2% ( 0.2) adept_notifier : schedule_timeout (process_timeout)
0.2% ( 0.2) <kernel core> : end_that_request_last (laptop_timer_fn)
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
