* Kristen Carlson Accardi <[email protected]>:
> On Mon, 19 Nov 2007 15:04:18 -0700
> Alex Chiang <[email protected]> wrote:
>
> > Documentation/accounting/getdelays.c | 43 +-
> > Documentation/feature-removal-schedule.txt | 9 -
> > Documentation/hwmon/sysfs-interface | 31 +
> > Documentation/markers.txt | 6 +-
> > <snip>
>
> Clearly something went horrifically wrong here....
Ugh, seems that stacked git got very confused when I did a
git-fetch && git-rebase origin. Also, guess it figures that I
shouldn't try and send a patch as I'm running out the door. :-/
Sorry about that.
Here is the correct version of Patch 4/4, v4. Note the small
changes in acpiphp and pciehp to disregard -EBUSY as an error
condition when returned from pci_hp_register. If you try and load
both drivers, whoever is in 2nd place will let you know that
another driver has already claimed the slot.
I didn't have the courage to go through and modify all the other
pcihp drivers, so if you have a system with both acpiphp and
shpcphp/cpciphp/etc., the dmesg output may be a little noisy (but
the behavior should be correct).
I'll have to digest Gary's recommendation for a boot-time kernel
option tomorrow.
Thanks.
From: Alex Chiang <[email protected]>
Detect all physical PCI slots as described by ACPI, and create
entries in /sys/bus/pci/slots/.
Not all physical slots are hotpluggable, and the acpiphp module
does not detect them. Now we know the physical PCI geography of
our system, without caring about hotplug.
v3 -> v4:
Always attempt to call pci_create_slot from pcihp_core to
cover cases of
a) user did not say Y to Kconfig option ACPI_PCI_SLOT
b) native PCIe hotplug driver registering on a
non-ACPI system.
Return -EBUSY if an hp driver attempts to register a slot
that is already registered to another driver. Do not
consider that to be an error condition in acpiphp and pciehp.
v2 -> v3:
Add Kconfig option to driver, allowing users to [de]config
this driver. If configured, take slightly different code
paths in pci_hp_register and pci_hp_deregister.
v1 -> v2:
Now recursively discovering p2p bridges and slots
underneath them. Hopefully, this will prevent us
from trying to register the same slot multiple times.
Signed-off-by: Alex Chiang <[email protected]>
---
drivers/acpi/Kconfig | 9 ++
drivers/acpi/Makefile | 1 +
drivers/acpi/pci_slot.c | 203 ++++++++++++++++++++++++++++++++
drivers/pci/hotplug/acpiphp_core.c | 2 +
drivers/pci/hotplug/acpiphp_glue.c | 7 +-
drivers/pci/hotplug/pci_hotplug_core.c | 22 +++-
drivers/pci/hotplug/pciehp_core.c | 11 ++-
drivers/pci/slot.c | 5 +
9 files changed, 256 insertions(+), 6 deletions(-)
create mode 100644 drivers/acpi/pci_slot.c
diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig
index ce9dead..c6da1e0 100644
--- a/drivers/acpi/Kconfig
+++ b/drivers/acpi/Kconfig
@@ -292,6 +292,15 @@ config ACPI_EC
the battery and thermal drivers. If you are compiling for a
mobile system, say Y.
+config ACPI_PCI_SLOT
+ bool "PCI slot detection driver"
+ default n
+ help
+ This driver will attempt to discover all PCI slots in your system,
+ and creates entries in /sys/bus/pci/slots/. This feature can
+ help you correlate PCI bus addresses with the physical geography
+ of your slots. If you are unsure, say N.
+
config ACPI_POWER
bool
default y
diff --git a/drivers/acpi/Makefile b/drivers/acpi/Makefile
index 54e3ab0..d89000e 100644
--- a/drivers/acpi/Makefile
+++ b/drivers/acpi/Makefile
@@ -48,6 +48,7 @@ obj-$(CONFIG_ACPI_DOCK) += dock.o
obj-$(CONFIG_ACPI_BAY) += bay.o
obj-$(CONFIG_ACPI_VIDEO) += video.o
obj-y += pci_root.o pci_link.o pci_irq.o pci_bind.o
+obj-$(CONFIG_ACPI_PCI_SLOT) += pci_slot.o
obj-$(CONFIG_ACPI_POWER) += power.o
obj-$(CONFIG_ACPI_PROCESSOR) += processor.o
obj-$(CONFIG_ACPI_CONTAINER) += container.o
diff --git a/drivers/acpi/pci_slot.c b/drivers/acpi/pci_slot.c
new file mode 100644
index 0000000..22f076b
--- /dev/null
+++ b/drivers/acpi/pci_slot.c
@@ -0,0 +1,203 @@
+/*
+ * pci_slot.c - ACPI PCI Slot Driver
+ *
+ * The code here is heavily leveraged from the acpiphp module.
+ * Thanks to Matthew Wilcox <[email protected]> for much guidance.
+ *
+ * Copyright (C) 2007 Alex Chiang <[email protected]>
+ * Copyright (C) 2007 Hewlett-Packard Development Company, L.P.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/acpi.h>
+#include <acpi/acpi_bus.h>
+#include <acpi/acpi_drivers.h>
+
+#define _COMPONENT ACPI_PCI_COMPONENT
+ACPI_MODULE_NAME("pci_slot");
+
+#define MY_NAME "pci_slot"
+#define err(format, arg...) printk(KERN_ERR "%s: " format , MY_NAME , ## arg)
+#define info(format, arg...) printk(KERN_INFO "%s: " format , MY_NAME , ## arg)
+
+static int acpi_pci_slot_add(acpi_handle handle);
+static void acpi_pci_slot_remove(acpi_handle handle);
+
+static struct acpi_pci_driver acpi_pci_slot_driver = {
+ .add = acpi_pci_slot_add,
+ .remove = acpi_pci_slot_remove,
+};
+
+/*
+ * register_slot - callback function to discover / create physical PCI slots
+ * @handle: any device underneath an acpi_pci_root (sometimes it's a slot
+ * device, sometimes not)
+ * @context: struct pci_bus
+ * The possible error conditions are non-fatal, so we always return
+ * AE_OK, as to not terminate our namespace walk prematurely.
+ */
+static acpi_status
+register_slot(acpi_handle handle, u32 lvl, void *context, void **rv)
+{
+ int device;
+ unsigned long adr, sun;
+ acpi_status status;
+ char name[KOBJ_NAME_LEN];
+
+ struct pci_slot *pci_slot;
+ struct pci_bus *pci_bus = context;
+
+ status = acpi_evaluate_integer(handle, "_ADR", NULL, &adr);
+ if (ACPI_FAILURE(status))
+ return AE_OK;
+ device = (adr >> 16) & 0xffff;
+
+ /* No _SUN == not a slot == bail */
+ status = acpi_evaluate_integer(handle, "_SUN", NULL, &sun);
+ if (ACPI_FAILURE(status))
+ return AE_OK;
+
+ snprintf(name, sizeof(name), "%u", (u32)sun);
+ pci_slot = pci_create_slot(pci_bus, device, name);
+ if (IS_ERR(pci_slot)) {
+ err("pci_create_slot returned %ld\n", PTR_ERR(pci_slot));
+ return AE_OK;
+ }
+
+ return AE_OK;
+}
+
+/*
+ * find_p2p_bridge - callback function to discover p2p bridges
+ */
+static acpi_status
+find_p2p_bridge(acpi_handle handle, u32 lvl, void *context, void **rv)
+{
+ int device, function;
+ unsigned long adr;
+ acpi_status status;
+ acpi_handle dummy_handle;
+
+ struct pci_dev *dev;
+ struct pci_bus *pci_bus = context;
+
+ status = acpi_get_handle(handle, "_ADR", &dummy_handle);
+ if (ACPI_FAILURE(status))
+ return AE_OK;
+
+ status = acpi_evaluate_integer(handle, "_ADR", NULL, &adr);
+ if (ACPI_FAILURE(status))
+ return AE_OK;
+
+ device = (adr >> 16) & 0xffff;
+ function = adr & 0xffff;
+
+ dev = pci_get_slot(pci_bus, PCI_DEVFN(device, function));
+ if (!dev || !dev->subordinate)
+ goto out;
+
+ status = acpi_walk_namespace(ACPI_TYPE_DEVICE, handle, (u32)1,
+ register_slot, dev->subordinate, NULL);
+ if (ACPI_FAILURE(status))
+ goto out;
+
+ status = acpi_walk_namespace(ACPI_TYPE_DEVICE, handle, (u32)1,
+ find_p2p_bridge, dev->subordinate, NULL);
+out:
+ pci_dev_put(dev);
+ return AE_OK;
+}
+
+#define ACPI_STA_FUNCTIONING (0x00000008)
+
+/*
+ * acpi_pci_slot_add - walk namespace under a PCI root bridge
+ * @handle: points to an acpi_pci_root
+ */
+static int
+acpi_pci_slot_add(acpi_handle handle)
+{
+ int seg, bus;
+ unsigned long tmp;
+ acpi_status status;
+ acpi_handle dummy_handle;
+ struct pci_bus *pci_bus;
+
+ /* If the bridge doesn't have _STA, we assume it is always there */
+ status = acpi_get_handle(handle, "_STA", &dummy_handle);
+ if (ACPI_SUCCESS(status)) {
+ status = acpi_evaluate_integer(handle, "_STA", NULL, &tmp);
+ if (ACPI_FAILURE(status)) {
+ info("%s: _STA evaluation failure\n", __FUNCTION__);
+ return 0;
+ }
+ if ((tmp & ACPI_STA_FUNCTIONING) == 0)
+ /* don't register this object */
+ return 0;
+ }
+
+ status = acpi_evaluate_integer(handle, "_SEG", NULL, &tmp);
+ seg = ACPI_SUCCESS(status) ? tmp : 0;
+
+ status = acpi_evaluate_integer(handle, "_BBN", NULL, &tmp);
+ bus = ACPI_SUCCESS(status) ? tmp : 0;
+
+ pci_bus = pci_find_bus(seg, bus);
+ if (!pci_bus)
+ return 0;
+
+ status = acpi_walk_namespace(ACPI_TYPE_DEVICE, handle, (u32)1,
+ register_slot, pci_bus, NULL);
+ if (ACPI_FAILURE(status)) {
+ err("%s: register_slot failure - %d\n", __FUNCTION__, status);
+ return status;
+ }
+
+ status = acpi_walk_namespace(ACPI_TYPE_DEVICE, handle, (u32)1,
+ find_p2p_bridge, pci_bus, NULL);
+ if (ACPI_FAILURE(status))
+ err("%s: find_p2p_bridge failure - %d\n", __FUNCTION__, status);
+
+ return status;
+}
+
+static int __init
+acpi_pci_slot_init(void)
+{
+ acpi_pci_register_driver(&acpi_pci_slot_driver);
+ return 0;
+}
+
+/*
+ * acpi_pci_slot_remove and acpi_pci_slot_exit are empty for now, since
+ * /sys/bus/pci/slots/ entries shouldn't ever really go away.
+ */
+static void
+acpi_pci_slot_remove(acpi_handle handle)
+{
+}
+
+static void __exit
+acpi_pci_slot_exit(void)
+{
+}
+
+module_init(acpi_pci_slot_init);
+module_exit(acpi_pci_slot_exit);
diff --git a/drivers/pci/hotplug/acpiphp_core.c b/drivers/pci/hotplug/acpiphp_core.c
index 34b8d0b..518dcd6 100644
--- a/drivers/pci/hotplug/acpiphp_core.c
+++ b/drivers/pci/hotplug/acpiphp_core.c
@@ -346,6 +346,8 @@ int acpiphp_register_hotplug_slot(struct acpiphp_slot *acpiphp_slot)
retval = pci_hp_register(slot->hotplug_slot,
acpiphp_slot->bridge->pci_bus,
acpiphp_slot->device);
+ if (retval == -EBUSY)
+ goto error_hpslot;
if (retval) {
err("pci_hp_register failed with error %d\n", retval);
goto error_hpslot;
diff --git a/drivers/pci/hotplug/acpiphp_glue.c b/drivers/pci/hotplug/acpiphp_glue.c
index 02a2fd7..bb0eada 100644
--- a/drivers/pci/hotplug/acpiphp_glue.c
+++ b/drivers/pci/hotplug/acpiphp_glue.c
@@ -259,7 +259,12 @@ register_slot(acpi_handle handle, u32 lvl, void *context, void **rv)
bridge->pci_bus->number, slot->device);
retval = acpiphp_register_hotplug_slot(slot);
if (retval) {
- warn("acpiphp_register_hotplug_slot failed(err code = 0x%x)\n", retval);
+ if (retval == -EBUSY)
+ warn("Slot %d already registered by another "
+ "hotplug driver\n", slot->sun);
+ else
+ warn("acpiphp_register_hotplug_slot failed "
+ "(err code = 0x%x)\n", retval);
goto err_exit;
}
}
diff --git a/drivers/pci/hotplug/pci_hotplug_core.c b/drivers/pci/hotplug/pci_hotplug_core.c
index 1be5b0d..61ade06 100644
--- a/drivers/pci/hotplug/pci_hotplug_core.c
+++ b/drivers/pci/hotplug/pci_hotplug_core.c
@@ -567,6 +567,14 @@ int pci_hp_register(struct hotplug_slot *slot, struct pci_bus *bus, int slot_nr)
return -EINVAL;
}
+ /*
+ * No problems if we call this interface from both ACPI_PCI_SLOT
+ * driver and call it here again. If we've already created the
+ * pci_slot, the interface will just return without error.
+ *
+ * We need this second call if we haven't already created the
+ * pci_slot (in the case of native PCIe hp slot).
+ */
pci_slot = pci_create_slot(bus, slot_nr, slot->name);
if (IS_ERR(pci_slot))
return PTR_ERR(pci_slot);
@@ -581,7 +589,7 @@ int pci_hp_register(struct hotplug_slot *slot, struct pci_bus *bus, int slot_nr)
list_add(&slot->slot_list, &pci_hotplug_slot_list);
result = fs_add_slot(pci_slot);
- dbg ("Added slot %s to the list\n", slot->name);
+ dbg("Added slot %s to the list\n", slot->name);
return result;
}
@@ -610,8 +618,18 @@ int pci_hp_deregister(struct hotplug_slot *hotplug)
slot = hotplug->pci_slot;
fs_remove_slot(slot);
- pci_destroy_slot(slot);
dbg("Removed slot %s from the list\n", hotplug->name);
+#ifdef CONFIG_ACPI_PCI_SLOT
+ /*
+ * If we are using the ACPI-PCI slot driver, we don't want to
+ * destroy the pci_slot object. Rather, just release the
+ * hotplug_slot associated with it.
+ */
+ hotplug_release(slot);
+ slot->release = NULL;
+#else
+ pci_destroy_slot(slot);
+#endif
return 0;
}
diff --git a/drivers/pci/hotplug/pciehp_core.c b/drivers/pci/hotplug/pciehp_core.c
index 19aa33e..299f6fa 100644
--- a/drivers/pci/hotplug/pciehp_core.c
+++ b/drivers/pci/hotplug/pciehp_core.c
@@ -246,8 +246,10 @@ static int init_slots(struct controller *ctrl)
retval = pci_hp_register(hotplug_slot,
ctrl->pci_dev->subordinate,
slot->device);
+ if (retval == -EBUSY)
+ goto error_info;
if (retval) {
- err ("pci_hp_register failed with error %d\n", retval);
+ err("pci_hp_register failed with error %d\n", retval);
goto error_info;
}
/* create additional sysfs entries */
@@ -452,7 +454,12 @@ static int pciehp_probe(struct pcie_device *dev, const struct pcie_port_service_
/* Setup the slot information structures */
rc = init_slots(ctrl);
if (rc) {
- err("%s: slot initialization failed\n", PCIE_MODULE_NAME);
+ if (rc == -EBUSY)
+ warn("%s: slot already registered by another "
+ "hotplug driver\n", PCIE_MODULE_NAME);
+ else
+ err("%s: slot initialization failed\n",
+ PCIE_MODULE_NAME);
goto err_out_release_ctlr;
}
diff --git a/drivers/pci/slot.c b/drivers/pci/slot.c
index f4ca61b..d2dc5dd 100644
--- a/drivers/pci/slot.c
+++ b/drivers/pci/slot.c
@@ -93,6 +93,11 @@ struct pci_slot *pci_slot_add_hotplug(struct pci_bus *parent, int slot_nr,
goto out;
}
+ if (slot->release) {
+ slot = ERR_PTR(-EBUSY);
+ goto out;
+ }
+
slot->release = release;
out:
up_write(&pci_bus_sem);
--
1.5.3.1.1.g1e61
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
