[PATCH] TPM TIS device driver locality request

[Marcel Selhorst <tpm@selhorst.net>]

Dear all,

during the initialization of the TPM TIS driver, the necessary
locality has to be requested earlier in the init-process. Depending on
the used TPM chip, this leads to wrong information.
For example: Lenovo X61s with Atmel TPM:

tpm_tis 00:0a: 1.2 TPM (device-id 0xFFFF, rev-id 255)

But correct is:

tpm_tis 00:0c: 1.2 TPM (device-id 0x3203, rev-id 9)

This short patch fixes this issue.

Signed-Off-by Marcel Selhorst <tpm@selhorst.net>
---
--- tpm_tis.c.orig      2007-11-19 00:21:09.000000000 +0100
+++ tpm_tis.c   2007-11-19 00:21:23.000000000 +0100
@@ -450,6 +450,11 @@ static int tpm_tis_init(struct device *d
                goto out_err;
        }

+       if (request_locality(chip, 0) != 0) {
+               rc = -ENODEV;
+               goto out_err;
+       }
+
        vendor = ioread32(chip->vendor.iobase + TPM_DID_VID(0));

        /* Default timeouts */
@@ -487,11 +492,6 @@ static int tpm_tis_init(struct device *d
        if (intfcaps & TPM_INTF_DATA_AVAIL_INT)
                dev_dbg(dev, "\tData Avail Int Support\n");

-       if (request_locality(chip, 0) != 0) {
-               rc = -ENODEV;
-               goto out_err;
-       }
-
        /* INTERRUPT Setup */
        init_waitqueue_head(&chip->vendor.read_queue);
        init_waitqueue_head(&chip->vendor.int_queue);
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/