Linus,
please pull x86 updates for 2.6.24 from:
ssh://master.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86.git master
Thanks,
tglx
Andreas Herrmann (2):
x86: fix cpu-hotplug regression
x86: show cpuinfo only for online CPUs
David P. Reed (3):
ntp: fix typo that makes sync_cmos_clock erratic
x86: fix freeze in x86_64 RTC update code in time_64.c
x86: on x86_64, correct reading of PC RTC when update in progress in time_64.c
Denys (1):
x86: reboot fixup for wrap2c board
Ingo Molnar (1):
x86: ignore the sys_getcpu() tcache parameter
Randy Dunlap (3):
x86: fix voyager_cat_init section
x86: fix smp init sections
x86: voyager use correct header file name
Thomas Gleixner (4):
x86: fix bogus memcpy in es7000_check_dsdt()
x86: fixup cpu_info array conversion
Remove x86 merge artifact from top Makefile
x86: add hpet sanity checks
Truxton Fulton (1):
x86: fix reboot with no keyboard attached
Yinghai Lu (1):
x86: check boundary in count setup resource
Makefile | 7 +----
arch/x86/kernel/acpi/boot.c | 32 +++++++++++++++++++++
arch/x86/kernel/cpu/mcheck/mce_64.c | 2 +-
arch/x86/kernel/cpu/proc.c | 8 ++---
arch/x86/kernel/reboot_fixups_32.c | 1 +
arch/x86/kernel/setup_64.c | 9 ++----
arch/x86/kernel/time_64.c | 41 +++++++++++++++-------------
arch/x86/mach-voyager/voyager_cat.c | 2 +-
arch/x86/mach-voyager/voyager_smp.c | 4 +-
arch/x86/pci/acpi.c | 6 ++++
arch/x86/vdso/vgetcpu.c | 19 +-----------
include/asm-x86/mach-default/mach_reboot.h | 2 +-
include/asm-x86/mach-es7000/mach_mpparse.h | 6 ++--
include/asm-x86/mach-voyager/setup_arch.h | 2 +-
kernel/sys.c | 20 +-------------
kernel/time/ntp.c | 2 +-
16 files changed, 81 insertions(+), 82 deletions(-)
diff --git a/Makefile b/Makefile
index 7f96930..11961a2 100644
--- a/Makefile
+++ b/Makefile
@@ -1334,12 +1334,7 @@ else
ALLINCLUDE_ARCHS := $(ALLSOURCE_ARCHS)
endif
-# Take care of arch/x86
-ifeq ($(ARCH), $(SRCARCH))
-ALLSOURCE_ARCHS := $(ARCH)
-else
-ALLSOURCE_ARCHS := $(ARCH) $(SRCARCH)
-endif
+ALLSOURCE_ARCHS := $(SRCARCH)
define find-sources
( for arch in $(ALLSOURCE_ARCHS) ; do \
diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c
index 289247d..0ca27c7 100644
--- a/arch/x86/kernel/acpi/boot.c
+++ b/arch/x86/kernel/acpi/boot.c
@@ -637,6 +637,38 @@ static int __init acpi_parse_hpet(struct acpi_table_header *table)
}
hpet_address = hpet_tbl->address.address;
+
+ /*
+ * Some broken BIOSes advertise HPET at 0x0. We really do not
+ * want to allocate a resource there.
+ */
+ if (!hpet_address) {
+ printk(KERN_WARNING PREFIX
+ "HPET id: %#x base: %#lx is invalid\n",
+ hpet_tbl->id, hpet_address);
+ return 0;
+ }
+#ifdef CONFIG_X86_64
+ /*
+ * Some even more broken BIOSes advertise HPET at
+ * 0xfed0000000000000 instead of 0xfed00000. Fix it up and add
+ * some noise:
+ */
+ if (hpet_address == 0xfed0000000000000UL) {
+ if (!hpet_force_user) {
+ printk(KERN_WARNING PREFIX "HPET id: %#x "
+ "base: 0xfed0000000000000 is bogus\n "
+ "try hpet=force on the kernel command line to "
+ "fix it up to 0xfed00000.\n", hpet_tbl->id);
+ hpet_address = 0;
+ return 0;
+ }
+ printk(KERN_WARNING PREFIX
+ "HPET id: %#x base: 0xfed0000000000000 fixed up "
+ "to 0xfed00000.\n", hpet_tbl->id);
+ hpet_address >>= 32;
+ }
+#endif
printk(KERN_INFO PREFIX "HPET id: %#x base: %#lx\n",
hpet_tbl->id, hpet_address);
diff --git a/arch/x86/kernel/cpu/mcheck/mce_64.c b/arch/x86/kernel/cpu/mcheck/mce_64.c
index 447b351..4b21d29 100644
--- a/arch/x86/kernel/cpu/mcheck/mce_64.c
+++ b/arch/x86/kernel/cpu/mcheck/mce_64.c
@@ -810,7 +810,7 @@ static __cpuinit int mce_create_device(unsigned int cpu)
int err;
int i;
- if (!mce_available(&cpu_data(cpu)))
+ if (!mce_available(&boot_cpu_data))
return -EIO;
memset(&per_cpu(device_mce, cpu).kobj, 0, sizeof(struct kobject));
diff --git a/arch/x86/kernel/cpu/proc.c b/arch/x86/kernel/cpu/proc.c
index 066f8c6..3900e46 100644
--- a/arch/x86/kernel/cpu/proc.c
+++ b/arch/x86/kernel/cpu/proc.c
@@ -89,8 +89,6 @@ static int show_cpuinfo(struct seq_file *m, void *v)
int fpu_exception;
#ifdef CONFIG_SMP
- if (!cpu_online(n))
- return 0;
n = c->cpu_index;
#endif
seq_printf(m, "processor\t: %d\n"
@@ -177,14 +175,14 @@ static int show_cpuinfo(struct seq_file *m, void *v)
static void *c_start(struct seq_file *m, loff_t *pos)
{
if (*pos == 0) /* just in case, cpu 0 is not the first */
- *pos = first_cpu(cpu_possible_map);
- if ((*pos) < NR_CPUS && cpu_possible(*pos))
+ *pos = first_cpu(cpu_online_map);
+ if ((*pos) < NR_CPUS && cpu_online(*pos))
return &cpu_data(*pos);
return NULL;
}
static void *c_next(struct seq_file *m, void *v, loff_t *pos)
{
- *pos = next_cpu(*pos, cpu_possible_map);
+ *pos = next_cpu(*pos, cpu_online_map);
return c_start(m, pos);
}
static void c_stop(struct seq_file *m, void *v)
diff --git a/arch/x86/kernel/reboot_fixups_32.c b/arch/x86/kernel/reboot_fixups_32.c
index 1a07bbe..f452726 100644
--- a/arch/x86/kernel/reboot_fixups_32.c
+++ b/arch/x86/kernel/reboot_fixups_32.c
@@ -39,6 +39,7 @@ struct device_fixup {
static struct device_fixup fixups_table[] = {
{ PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5530_LEGACY, cs5530a_warm_reset },
{ PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CS5536_ISA, cs5536_warm_reset },
+{ PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_SC1100_BRIDGE, cs5530a_warm_reset },
};
/*
diff --git a/arch/x86/kernel/setup_64.c b/arch/x86/kernel/setup_64.c
index 238633d..30d94d1 100644
--- a/arch/x86/kernel/setup_64.c
+++ b/arch/x86/kernel/setup_64.c
@@ -892,7 +892,6 @@ void __cpuinit early_identify_cpu(struct cpuinfo_x86 *c)
#ifdef CONFIG_SMP
c->phys_proc_id = (cpuid_ebx(1) >> 24) & 0xff;
- c->cpu_index = 0;
#endif
}
@@ -1078,8 +1077,6 @@ static int show_cpuinfo(struct seq_file *m, void *v)
#ifdef CONFIG_SMP
- if (!cpu_online(c->cpu_index))
- return 0;
cpu = c->cpu_index;
#endif
@@ -1171,15 +1168,15 @@ static int show_cpuinfo(struct seq_file *m, void *v)
static void *c_start(struct seq_file *m, loff_t *pos)
{
if (*pos == 0) /* just in case, cpu 0 is not the first */
- *pos = first_cpu(cpu_possible_map);
- if ((*pos) < NR_CPUS && cpu_possible(*pos))
+ *pos = first_cpu(cpu_online_map);
+ if ((*pos) < NR_CPUS && cpu_online(*pos))
return &cpu_data(*pos);
return NULL;
}
static void *c_next(struct seq_file *m, void *v, loff_t *pos)
{
- *pos = next_cpu(*pos, cpu_possible_map);
+ *pos = next_cpu(*pos, cpu_online_map);
return c_start(m, pos);
}
diff --git a/arch/x86/kernel/time_64.c b/arch/x86/kernel/time_64.c
index c821edc..368b194 100644
--- a/arch/x86/kernel/time_64.c
+++ b/arch/x86/kernel/time_64.c
@@ -82,18 +82,15 @@ static int set_rtc_mmss(unsigned long nowtime)
int retval = 0;
int real_seconds, real_minutes, cmos_minutes;
unsigned char control, freq_select;
+ unsigned long flags;
/*
- * IRQs are disabled when we're called from the timer interrupt,
- * no need for spin_lock_irqsave()
+ * set_rtc_mmss is called when irqs are enabled, so disable irqs here
*/
-
- spin_lock(&rtc_lock);
-
+ spin_lock_irqsave(&rtc_lock, flags);
/*
* Tell the clock it's being set and stop it.
*/
-
control = CMOS_READ(RTC_CONTROL);
CMOS_WRITE(control | RTC_SET, RTC_CONTROL);
@@ -138,7 +135,7 @@ static int set_rtc_mmss(unsigned long nowtime)
CMOS_WRITE(control, RTC_CONTROL);
CMOS_WRITE(freq_select, RTC_FREQ_SELECT);
- spin_unlock(&rtc_lock);
+ spin_unlock_irqrestore(&rtc_lock, flags);
return retval;
}
@@ -164,21 +161,27 @@ unsigned long read_persistent_clock(void)
unsigned century = 0;
spin_lock_irqsave(&rtc_lock, flags);
+ /*
+ * if UIP is clear, then we have >= 244 microseconds before RTC
+ * registers will be updated. Spec sheet says that this is the
+ * reliable way to read RTC - registers invalid (off bus) during update
+ */
+ while ((CMOS_READ(RTC_FREQ_SELECT) & RTC_UIP))
+ cpu_relax();
- do {
- sec = CMOS_READ(RTC_SECONDS);
- min = CMOS_READ(RTC_MINUTES);
- hour = CMOS_READ(RTC_HOURS);
- day = CMOS_READ(RTC_DAY_OF_MONTH);
- mon = CMOS_READ(RTC_MONTH);
- year = CMOS_READ(RTC_YEAR);
+
+ /* now read all RTC registers while stable with interrupts disabled */
+ sec = CMOS_READ(RTC_SECONDS);
+ min = CMOS_READ(RTC_MINUTES);
+ hour = CMOS_READ(RTC_HOURS);
+ day = CMOS_READ(RTC_DAY_OF_MONTH);
+ mon = CMOS_READ(RTC_MONTH);
+ year = CMOS_READ(RTC_YEAR);
#ifdef CONFIG_ACPI
- if (acpi_gbl_FADT.header.revision >= FADT2_REVISION_ID &&
- acpi_gbl_FADT.century)
- century = CMOS_READ(acpi_gbl_FADT.century);
+ if (acpi_gbl_FADT.header.revision >= FADT2_REVISION_ID &&
+ acpi_gbl_FADT.century)
+ century = CMOS_READ(acpi_gbl_FADT.century);
#endif
- } while (sec != CMOS_READ(RTC_SECONDS));
-
spin_unlock_irqrestore(&rtc_lock, flags);
/*
diff --git a/arch/x86/mach-voyager/voyager_cat.c b/arch/x86/mach-voyager/voyager_cat.c
index 26a2d4c..2132ca6 100644
--- a/arch/x86/mach-voyager/voyager_cat.c
+++ b/arch/x86/mach-voyager/voyager_cat.c
@@ -568,7 +568,7 @@ static voyager_module_t *voyager_initial_module;
* boot cpu *after* all memory initialisation has been done (so we can
* use kmalloc) but before smp initialisation, so we can probe the SMP
* configuration and pick up necessary information. */
-void
+void __init
voyager_cat_init(void)
{
voyager_module_t **modpp = &voyager_initial_module;
diff --git a/arch/x86/mach-voyager/voyager_smp.c b/arch/x86/mach-voyager/voyager_smp.c
index 6937143..88124dd 100644
--- a/arch/x86/mach-voyager/voyager_smp.c
+++ b/arch/x86/mach-voyager/voyager_smp.c
@@ -1900,7 +1900,7 @@ voyager_smp_prepare_cpus(unsigned int max_cpus)
smp_boot_cpus();
}
-static void __devinit voyager_smp_prepare_boot_cpu(void)
+static void __cpuinit voyager_smp_prepare_boot_cpu(void)
{
init_gdt(smp_processor_id());
switch_to_new_gdt();
@@ -1911,7 +1911,7 @@ static void __devinit voyager_smp_prepare_boot_cpu(void)
cpu_set(smp_processor_id(), cpu_present_map);
}
-static int __devinit
+static int __cpuinit
voyager_cpu_up(unsigned int cpu)
{
/* This only works at boot for x86. See "rewrite" above. */
diff --git a/arch/x86/pci/acpi.c b/arch/x86/pci/acpi.c
index 2d88f7c..7e35078 100644
--- a/arch/x86/pci/acpi.c
+++ b/arch/x86/pci/acpi.c
@@ -77,6 +77,9 @@ count_resource(struct acpi_resource *acpi_res, void *data)
struct acpi_resource_address64 addr;
acpi_status status;
+ if (info->res_num >= PCI_BUS_NUM_RESOURCES)
+ return AE_OK;
+
status = resource_to_addr(acpi_res, &addr);
if (ACPI_SUCCESS(status))
info->res_num++;
@@ -93,6 +96,9 @@ setup_resource(struct acpi_resource *acpi_res, void *data)
unsigned long flags;
struct resource *root;
+ if (info->res_num >= PCI_BUS_NUM_RESOURCES)
+ return AE_OK;
+
status = resource_to_addr(acpi_res, &addr);
if (!ACPI_SUCCESS(status))
return AE_OK;
diff --git a/arch/x86/vdso/vgetcpu.c b/arch/x86/vdso/vgetcpu.c
index 91f6e85..3b1ae1a 100644
--- a/arch/x86/vdso/vgetcpu.c
+++ b/arch/x86/vdso/vgetcpu.c
@@ -13,32 +13,17 @@
#include <asm/vgtod.h>
#include "vextern.h"
-long __vdso_getcpu(unsigned *cpu, unsigned *node, struct getcpu_cache *tcache)
+long __vdso_getcpu(unsigned *cpu, unsigned *node, struct getcpu_cache *unused)
{
unsigned int dummy, p;
- unsigned long j = 0;
- /* Fast cache - only recompute value once per jiffies and avoid
- relatively costly rdtscp/cpuid otherwise.
- This works because the scheduler usually keeps the process
- on the same CPU and this syscall doesn't guarantee its
- results anyways.
- We do this here because otherwise user space would do it on
- its own in a likely inferior way (no access to jiffies).
- If you don't like it pass NULL. */
- if (tcache && tcache->blob[0] == (j = *vdso_jiffies)) {
- p = tcache->blob[1];
- } else if (*vdso_vgetcpu_mode == VGETCPU_RDTSCP) {
+ if (*vdso_vgetcpu_mode == VGETCPU_RDTSCP) {
/* Load per CPU data from RDTSCP */
rdtscp(dummy, dummy, p);
} else {
/* Load per CPU data from GDT */
asm("lsl %1,%0" : "=r" (p) : "r" (__PER_CPU_SEG));
}
- if (tcache) {
- tcache->blob[0] = j;
- tcache->blob[1] = p;
- }
if (cpu)
*cpu = p & 0xfff;
if (node)
diff --git a/include/asm-x86/mach-default/mach_reboot.h b/include/asm-x86/mach-default/mach_reboot.h
index e23fd9f..6adee6a 100644
--- a/include/asm-x86/mach-default/mach_reboot.h
+++ b/include/asm-x86/mach-default/mach_reboot.h
@@ -49,7 +49,7 @@ static inline void mach_reboot(void)
udelay(50);
kb_wait();
udelay(50);
- outb(cmd | 0x04, 0x60); /* set "System flag" */
+ outb(cmd | 0x14, 0x60); /* set "System flag" and "Keyboard Disabled" */
udelay(50);
kb_wait();
udelay(50);
diff --git a/include/asm-x86/mach-es7000/mach_mpparse.h b/include/asm-x86/mach-es7000/mach_mpparse.h
index 8aa1054..52ee75c 100644
--- a/include/asm-x86/mach-es7000/mach_mpparse.h
+++ b/include/asm-x86/mach-es7000/mach_mpparse.h
@@ -29,9 +29,9 @@ extern int mps_oem_check(struct mp_config_table *mpc, char *oem,
static inline int es7000_check_dsdt(void)
{
struct acpi_table_header header;
- memcpy(&header, 0, sizeof(struct acpi_table_header));
- acpi_get_table_header(ACPI_SIG_DSDT, 0, &header);
- if (!strncmp(header.oem_id, "UNISYS", 6))
+
+ if (ACPI_SUCCESS(acpi_get_table_header(ACPI_SIG_DSDT, 0, &header)) &&
+ !strncmp(header.oem_id, "UNISYS", 6))
return 1;
return 0;
}
diff --git a/include/asm-x86/mach-voyager/setup_arch.h b/include/asm-x86/mach-voyager/setup_arch.h
index 1710ae1..71729ca 100644
--- a/include/asm-x86/mach-voyager/setup_arch.h
+++ b/include/asm-x86/mach-voyager/setup_arch.h
@@ -1,5 +1,5 @@
#include <asm/voyager.h>
-#include <asm/setup_32.h>
+#include <asm/setup.h>
#define VOYAGER_BIOS_INFO ((struct voyager_bios_info *) \
(&boot_params.apm_bios_info))
diff --git a/kernel/sys.c b/kernel/sys.c
index 304b541..d1fe71e 100644
--- a/kernel/sys.c
+++ b/kernel/sys.c
@@ -1750,7 +1750,7 @@ asmlinkage long sys_prctl(int option, unsigned long arg2, unsigned long arg3,
}
asmlinkage long sys_getcpu(unsigned __user *cpup, unsigned __user *nodep,
- struct getcpu_cache __user *cache)
+ struct getcpu_cache __user *unused)
{
int err = 0;
int cpu = raw_smp_processor_id();
@@ -1758,24 +1758,6 @@ asmlinkage long sys_getcpu(unsigned __user *cpup, unsigned __user *nodep,
err |= put_user(cpu, cpup);
if (nodep)
err |= put_user(cpu_to_node(cpu), nodep);
- if (cache) {
- /*
- * The cache is not needed for this implementation,
- * but make sure user programs pass something
- * valid. vsyscall implementations can instead make
- * good use of the cache. Only use t0 and t1 because
- * these are available in both 32bit and 64bit ABI (no
- * need for a compat_getcpu). 32bit has enough
- * padding
- */
- unsigned long t0, t1;
- get_user(t0, &cache->blob[0]);
- get_user(t1, &cache->blob[1]);
- t0++;
- t1++;
- put_user(t0, &cache->blob[0]);
- put_user(t1, &cache->blob[1]);
- }
return err ? -EFAULT : 0;
}
diff --git a/kernel/time/ntp.c b/kernel/time/ntp.c
index de6a2d6..14a2ecf 100644
--- a/kernel/time/ntp.c
+++ b/kernel/time/ntp.c
@@ -205,7 +205,7 @@ static void sync_cmos_clock(unsigned long dummy)
return;
getnstimeofday(&now);
- if (abs(xtime.tv_nsec - (NSEC_PER_SEC / 2)) <= tick_nsec / 2)
+ if (abs(now.tv_nsec - (NSEC_PER_SEC / 2)) <= tick_nsec / 2)
fail = update_persistent_clock(now);
next.tv_nsec = (NSEC_PER_SEC / 2) - now.tv_nsec;
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
