Re: [PATCH 2/2] [e1000 VLAN] Disable vlan hw accel when promiscuous mode

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



>>>>> "AK" == Kok, Auke <[email protected]> writes:

AK> actually the impact can be quite negative, imagine doing a tcpdump
AK> on a 10gig interface with vlan's enabled - all of a sudden you
AK> might accidentally flood the system with a 100-fold increase in
AK> traffic and force the stack to dump all those packets for you.

Why is the switch sending you all that traffic for VLAN's you don't
care about? I have a hard time imagining such a scenario. Sure, you
could have forgotten to limit the VLAN range sent to a particular
host, or even have decided that it's administratively easier to just
allow everything, but the switch still won't send unicast traffic out
that port unless the destination MAC matches. If broadcast or
non-solicited multicast takes up most of your bandwidth, you have
other problems.


/Benny


-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[Index of Archives]     [Kernel Newbies]     [Netfilter]     [Bugtraq]     [Photo]     [Stuff]     [Gimp]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Video 4 Linux]     [Linux for the blind]     [Linux Resources]
  Powered by Linux