[PATCH 2/2] [e1000 VLAN] Disable vlan hw accel when promiscuous mode

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



IMHO even though netdevice is in the promiscuous mode, we should receive all of ingress packets.
This disable the vlan filtering feature when a vlan hw accel configured e1000 device goes into promiscuous mode.
This make packets visible to sniffers though it's not vlan id of itself.
Any check, comments will be appreciated.
Thanks.

Signed-off-by: Joonwoo Park <[email protected]>
---
 drivers/net/e1000/e1000_main.c |   26 ++++++++++++++++++++------
 1 files changed, 20 insertions(+), 6 deletions(-)

diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c index 72deff0..cdd5c84 100644
--- a/drivers/net/e1000/e1000_main.c
+++ b/drivers/net/e1000/e1000_main.c
@@ -2424,7 +2424,7 @@ e1000_set_multi(struct net_device *netdev)
 	struct e1000_adapter *adapter = netdev_priv(netdev);
 	struct e1000_hw *hw = &adapter->hw;
 	struct dev_mc_list *mc_ptr;
-	uint32_t rctl;
+	uint32_t rctl, ctrl;
 	uint32_t hash_value;
 	int i, rar_entries = E1000_RAR_ENTRIES;
 	int mta_reg_count = (hw->mac_type == e1000_ich8lan) ?
@@ -2441,14 +2441,25 @@ e1000_set_multi(struct net_device *netdev)
 	/* Check for Promiscuous and All Multicast modes */
 
 	rctl = E1000_READ_REG(hw, RCTL);
+	ctrl = E1000_READ_REG(&adapter->hw, CTRL);
 
 	if (netdev->flags & IFF_PROMISC) {
 		rctl |= (E1000_RCTL_UPE | E1000_RCTL_MPE);
-	} else if (netdev->flags & IFF_ALLMULTI) {
-		rctl |= E1000_RCTL_MPE;
-		rctl &= ~E1000_RCTL_UPE;
+		if (adapter->hw.mac_type != e1000_ich8lan) {
+			if (ctrl & E1000_CTRL_VME)
+				rctl &= ~E1000_RCTL_VFE;
+		}
 	} else {
-		rctl &= ~(E1000_RCTL_UPE | E1000_RCTL_MPE);
+		if (adapter->hw.mac_type != e1000_ich8lan) {
+			if (ctrl & E1000_CTRL_VME)
+				rctl |= E1000_RCTL_VFE;
+		}
+		if (netdev->flags & IFF_ALLMULTI) {
+			rctl |= E1000_RCTL_MPE;
+			rctl &= ~E1000_RCTL_UPE;
+		} else {
+			rctl &= ~(E1000_RCTL_UPE | E1000_RCTL_MPE);
+		}
 	}
 
 	E1000_WRITE_REG(hw, RCTL, rctl);
@@ -4952,7 +4963,10 @@ e1000_vlan_rx_register(struct net_device *netdev, struct vlan_group *grp)
 		if (adapter->hw.mac_type != e1000_ich8lan) {
 			/* enable VLAN receive filtering */
 			rctl = E1000_READ_REG(&adapter->hw, RCTL);
-			rctl |= E1000_RCTL_VFE;
+			if (netdev->flags & IFF_PROMISC)
+				rctl &= ~E1000_RCTL_VFE;
+			else
+				rctl |= E1000_RCTL_VFE;
 			rctl &= ~E1000_RCTL_CFIEN;
 			E1000_WRITE_REG(&adapter->hw, RCTL, rctl);
 			e1000_update_mng_vlan(adapter);
---

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[Index of Archives]     [Kernel Newbies]     [Netfilter]     [Bugtraq]     [Photo]     [Stuff]     [Gimp]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Video 4 Linux]     [Linux for the blind]     [Linux Resources]
  Powered by Linux