The Xframe (S2io) adapter can be programmed dynamically to either,
always strip the vlan tag or not. In this case, if the vlan group is
NULL, it can be programmed at run time to NOT strip the vlan tag.
When a packet with a Vlan id is received that is not added to the group,
should it be dropped or indicated up? Either can be handled by the
hardware. The vlan tag in this particular case will be stripped as the
vlan group is not NULL.
Ram
> -----Original Message-----
> From: Dave Johnson
[mailto:[email protected]]
> Sent: Monday, November 05, 2007 9:47 AM
> To: David Miller; [email protected]; [email protected];
> [email protected]; [email protected];
> [email protected]; [email protected]
> Subject: [PATCH 2/2] NET: Re-add VLAN tag for devices incapable of
keeping
> it
>
>
> This patch changes the following drivers to use vlan_hwaccel_rx()
> and/or vlan_hwaccel_receive_skb() with a NULL vlan group if needed as
> they are not setup to dynamically enable/disable vlan removal in
> their MAC based on the vlan group:
>
> drivers/net/tg3.c Tested on BCM5704, looks good
> drivers/net/bnx2.c Tested on BCM5708, looks good
> drivers/net/acenic.c Not tested, I don't have one of these
> drivers/net/s2io.c Not tested, I don't have one of these
>
> In addition, these drivers might also need changes, but should
> probably be done by the maintainer as it's not clear exactly what
> change is needed:
>
> drivers/net/amd8111e.c
> drivers/net/cxgb3/*
>
> Signed-off-by: Dave Johnson <[email protected]>
>
> ===== drivers/net/acenic.c 1.77 vs edited =====
> --- 1.77/drivers/net/acenic.c 2007-07-24 16:28:41 -04:00
> +++ edited/drivers/net/acenic.c 2007-11-03 12:27:40 -04:00
> @@ -2036,7 +2036,7 @@
>
> /* send it up */
> #if ACENIC_DO_VLAN
> - if (ap->vlgrp && (bd_flags & BD_FLG_VLAN_TAG)) {
> + if (bd_flags & BD_FLG_VLAN_TAG) {
> vlan_hwaccel_rx(skb, ap->vlgrp, retdesc->vlan);
> } else
> #endif
> ===== drivers/net/bnx2.c 1.135 vs edited =====
> --- 1.135/drivers/net/bnx2.c 2007-09-20 15:14:21 -04:00
> +++ edited/drivers/net/bnx2.c 2007-11-05 09:34:26 -05:00
> @@ -2493,7 +2493,8 @@
> }
>
> #ifdef BCM_VLAN
> - if ((status & L2_FHDR_STATUS_L2_VLAN_TAG) && (bp->vlgrp
!= 0))
> {
> + if ((status & L2_FHDR_STATUS_L2_VLAN_TAG) &&
> + (bp->vlgrp || (bp->flags & ASF_ENABLE_FLAG))) {
> vlan_hwaccel_receive_skb(skb, bp->vlgrp,
> rx_hdr->l2_fhdr_vlan_tag);
> }
> ===== drivers/net/s2io.c 1.124 vs edited =====
> --- 1.124/drivers/net/s2io.c 2007-08-03 18:10:44 -04:00
> +++ edited/drivers/net/s2io.c 2007-11-03 12:29:09 -04:00
> @@ -6834,8 +6834,7 @@
> sp->mac_control.stats_info->sw_stat.mem_freed += skb->truesize;
> if (!sp->lro) {
> skb->protocol = eth_type_trans(skb, dev);
> - if ((sp->vlgrp && RXD_GET_VLAN_TAG(rxdp->Control_2) &&
> - vlan_strip_flag)) {
> + if (RXD_GET_VLAN_TAG(rxdp->Control_2) &&
vlan_strip_flag) {
> /* Queueing the vlan frame to the upper layer */
> if (napi)
> vlan_hwaccel_receive_skb(skb, sp->vlgrp,
> ===== drivers/net/tg3.c 1.523 vs edited =====
> --- 1.523/drivers/net/tg3.c 2007-09-11 04:28:44 -04:00
> +++ edited/drivers/net/tg3.c 2007-11-05 09:38:33 -05:00
> @@ -3417,7 +3417,7 @@
>
> skb->protocol = eth_type_trans(skb, tp->dev);
> #if TG3_VLAN_TAG_USED
> - if (tp->vlgrp != NULL &&
> + if ((tp->vlgrp || (tp->tg3_flags & TG3_FLAG_ENABLE_ASF))
&&
> desc->type_flags & RXD_FLAG_VLAN) {
> tg3_vlan_rx(tp, skb,
> desc->err_vlan & RXD_VLAN_MASK);
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
