Hi folks,
I found this call trace in /var/kern.log:
:
:
Oct 30 14:59:36 pluto kernel: usb 1-2: config 1 descriptor has 1 excess byte, ignoring
Oct 30 14:59:36 pluto kernel: usb 1-2: configuration #1 chosen from 1 choice
Oct 30 14:59:36 pluto kernel: usb 1-3: new high speed USB device using ehci_hcd and address 4
Oct 30 14:59:36 pluto kernel: usb 1-3: configuration #1 chosen from 1 choice
Oct 30 14:59:36 pluto kernel: ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
Oct 30 14:59:36 pluto kernel: ata3.00: ATA-7: SAMSUNG SP2504C, VT100-41, max UDMA7
Oct 30 14:59:36 pluto kernel: ata3.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32)
Oct 30 14:59:36 pluto kernel: ata3.00: configured for UDMA/100
Oct 30 14:59:36 pluto kernel: usb 1-5: new high speed USB device using ehci_hcd and address 5
Oct 30 14:59:36 pluto kernel: usb 1-5: configuration #1 chosen from 1 choice
Oct 30 14:59:36 pluto kernel: usb 1-1.1: new high speed USB device using ehci_hcd and address 6
Oct 30 14:59:36 pluto kernel: usb 1-1.1: configuration #1 chosen from 1 choice
Oct 30 14:59:36 pluto kernel: hub 1-1.1:1.0: USB hub found
Oct 30 14:59:36 pluto kernel: ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
Oct 30 14:59:36 pluto kernel: hub 1-1.1:1.0: 4 ports detected
Oct 30 14:59:36 pluto kernel: sysfs: duplicate filename 'bInterfaceNumber' can not be created
Oct 30 14:59:36 pluto kernel: WARNING: at fs/sysfs/dir.c:424 sysfs_add_one()
Oct 30 14:59:36 pluto kernel:
Oct 30 14:59:36 pluto kernel: Call Trace:
Oct 30 14:59:36 pluto kernel: [<ffffffff802d250e>] sysfs_add_one+0xae/0xe0
Oct 30 14:59:36 pluto kernel: [<ffffffff802d1dff>] sysfs_add_file+0x5f/0xb0
Oct 30 14:59:36 pluto kernel: [<ffffffff802d3dfc>] sysfs_create_group+0x6c/0x120
Oct 30 14:59:36 pluto kernel: [<ffffffff880283e6>] :usbcore:usb_create_sysfs_intf_files+0x46/0x100
Oct 30 14:59:36 pluto kernel: [<ffffffff88023e76>] :usbcore:usb_set_configuration+0x336/0x5f0
Oct 30 14:59:36 pluto kernel: [<ffffffff8802cd8c>] :usbcore:generic_probe+0x7c/0xb0
Oct 30 14:59:36 pluto kernel: [<ffffffff8037875b>] driver_probe_device+0x9b/0x1c0
Oct 30 14:59:36 pluto kernel: [<ffffffff80378880>] __device_attach+0x0/0x10
Oct 30 14:59:36 pluto kernel: [<ffffffff80377828>] bus_for_each_drv+0x58/0x80
Oct 30 14:59:36 pluto kernel: [<ffffffff80378958>] device_attach+0x88/0x90
Oct 30 14:59:36 pluto kernel: [<ffffffff80377785>] bus_attach_device+0x55/0xa0
Oct 30 14:59:36 pluto kernel: [<ffffffff80376468>] device_add+0x528/0x690
Oct 30 14:59:36 pluto kernel: [<ffffffff8801e2e5>] :usbcore:usb_new_device+0x55/0xa0
Oct 30 14:59:36 pluto kernel: [<ffffffff8801f759>] :usbcore:hub_thread+0x749/0xe10
Oct 30 14:59:36 pluto kernel: [<ffffffff80229083>] set_next_entity+0x23/0x50
Oct 30 14:59:36 pluto kernel: [<ffffffff802456b0>] autoremove_wake_function+0x0/0x30
Oct 30 14:59:36 pluto kernel: [<ffffffff8801f010>] :usbcore:hub_thread+0x0/0xe10
Oct 30 14:59:36 pluto kernel: [<ffffffff8024523b>] kthread+0x4b/0x80
Oct 30 14:59:36 pluto kernel: [<ffffffff8020c538>] child_rip+0xa/0x12
Oct 30 14:59:36 pluto kernel: [<ffffffff802451f0>] kthread+0x0/0x80
Oct 30 14:59:36 pluto kernel: [<ffffffff8020c52e>] child_rip+0x0/0x12
Oct 30 14:59:36 pluto kernel:
Oct 30 14:59:36 pluto kernel: ata4.00: ATAPI: TSSTcorpCD/DVDW SH-S183A, SB02, max UDMA/33
Oct 30 14:59:36 pluto kernel: ata4.00: applying bridge limits
Oct 30 14:59:36 pluto kernel: ata4.00: configured for UDMA/33
Oct 30 14:59:36 pluto kernel: scsi 2:0:0:0: Direct-Access ATA SAMSUNG SP2504C VT10 PQ: 0 ANSI: 5
Oct 30 14:59:36 pluto kernel: usb 1-1.1.1: new high speed USB device using ehci_hcd and address 7
Oct 30 14:59:36 pluto kernel: scsi 3:0:0:0: CD-ROM TSSTcorp CD/DVDW SH-S183A SB02 PQ: 0 ANSI: 5
Oct 30 14:59:36 pluto kernel: ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
Oct 30 14:59:36 pluto kernel: ACPI: PCI Interrupt 0000:01:06.0[A] -> Link [APC3] -> GSI 18 (level, low) -> IRQ 18
:
:
uname says:
Linux pluto 2.6.24-rc1 #1 PREEMPT Sat Oct 27 22:56:02 CEST 2007 x86_64 GNU/Linux
Is this anything to worry about? Please mail if I can help to track this
down.
Regards
Harri
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]