Convert to use the generic boolean.
Signed-off-by: Richard Knutsson <[email protected]>
---
Diffed against linus-git
Checked with script/checkpatch.pl
(warned about long lines, but it is not introduced by this patch)
dpt_i2o.c | 22 +++++++++++-----------
dpti.h | 9 ++-------
2 files changed, 13 insertions(+), 18 deletions(-)
diff --git a/drivers/scsi/dpt_i2o.c b/drivers/scsi/dpt_i2o.c
index 8258506..bd3a82d 100644
--- a/drivers/scsi/dpt_i2o.c
+++ b/drivers/scsi/dpt_i2o.c
@@ -252,7 +252,7 @@ rebuild_sys_tab:
adpt_i2o_delete_hba(pHba);
continue;
}
- pHba->initialized = TRUE;
+ pHba->initialized = true;
pHba->state &= ~DPTI_STATE_RESET;
scsi_scan_host(pHba->host);
}
@@ -519,7 +519,7 @@ static int adpt_proc_info(struct Scsi_Host *host, char *buffer, char **start, of
int unit;
*start = buffer;
- if (inout == TRUE) {
+ if (inout) {
/*
* The user has done a write and wants us to take the
* data in the buffer and do something with it.
@@ -893,7 +893,7 @@ static int adpt_install_hba(struct pci_dev* pDev)
void __iomem *base_addr_virt = NULL;
void __iomem *msg_addr_virt = NULL;
- int raptorFlag = FALSE;
+ bool raptorFlag = false;
if(pci_enable_device(pDev)) {
return -EINVAL;
@@ -926,7 +926,7 @@ static int adpt_install_hba(struct pci_dev* pDev)
// Use BAR1 in this configuration
base_addr1_phys = pci_resource_start(pDev,1);
hba_map1_area_size = pci_resource_len(pDev,1);
- raptorFlag = TRUE;
+ raptorFlag = true;
}
base_addr_virt = ioremap(base_addr0_phys,hba_map0_area_size);
@@ -936,7 +936,7 @@ static int adpt_install_hba(struct pci_dev* pDev)
return -EINVAL;
}
- if(raptorFlag == TRUE) {
+ if (raptorFlag) {
msg_addr_virt = ioremap(base_addr1_phys, hba_map1_area_size );
if (!msg_addr_virt) {
PERROR("dpti: adpt_config_hba: io remap failed on BAR1\n");
@@ -996,7 +996,7 @@ static int adpt_install_hba(struct pci_dev* pDev)
spin_lock_init(&pHba->state_lock);
spin_lock_init(&adpt_post_wait_lock);
- if(raptorFlag == 0){
+ if (!raptorFlag) {
printk(KERN_INFO"Adaptec I2O RAID controller %d at %p size=%x irq=%d\n",
hba_count-1, base_addr_virt, hba_map0_area_size, pDev->irq);
} else {
@@ -1273,7 +1273,7 @@ static s32 adpt_i2o_reset_hba(adpt_hba* pHba)
u32 m = EMPTY_QUEUE ;
ulong timeout = jiffies + (TMOUT_IOPRESET*HZ);
- if(pHba->initialized == FALSE) { // First time reset should be quick
+ if (!pHba->initialized) { /* First time reset should be quick */
timeout = jiffies + (25*HZ);
} else {
adpt_i2o_quiesce_hba(pHba);
@@ -1576,7 +1576,7 @@ static int adpt_open(struct inode *inode, struct file *file)
// return -EBUSY;
// }
- pHba->in_use = 1;
+ pHba->in_use = true;
mutex_unlock(&adpt_configuration_lock);
return 0;
@@ -1602,7 +1602,7 @@ static int adpt_close(struct inode *inode, struct file *file)
return -ENXIO;
}
- pHba->in_use = 0;
+ pHba->in_use = false;
return 0;
}
@@ -2433,8 +2433,8 @@ static s32 adpt_i2o_reparse_lct(adpt_hba* pHba)
pDev->tid = tid;
memcpy(&d->lct_data, &lct->lct_entry[i], sizeof(i2o_lct_entry));
if (pDev->pScsi_dev) {
- pDev->pScsi_dev->changed = TRUE;
- pDev->pScsi_dev->removable = TRUE;
+ pDev->pScsi_dev->changed = true;
+ pDev->pScsi_dev->removable = true;
}
}
// Found it - mark it scanned
diff --git a/drivers/scsi/dpti.h b/drivers/scsi/dpti.h
index 0892f6c..5eb7274 100644
--- a/drivers/scsi/dpti.h
+++ b/drivers/scsi/dpti.h
@@ -155,11 +155,6 @@ static int adpt_device_reset(struct scsi_cmnd* cmd);
#define I2O_SCSI_DSC_QUEUE_FROZEN 0x4000
-#ifndef TRUE
-#define TRUE 1
-#define FALSE 0
-#endif
-
#define HBA_FLAGS_INSTALLED_B 0x00000001 // Adapter Was Installed
#define HBA_FLAGS_BLINKLED_B 0x00000002 // Adapter In Blink LED State
#define HBA_FLAGS_IN_RESET 0x00000040 /* in reset */
@@ -209,8 +204,8 @@ typedef struct _adpt_hba {
spinlock_t state_lock;
int unit;
int host_no; /* SCSI host number */
- u8 initialized;
- u8 in_use; /* is the management node open*/
+ bool initialized:8;
+ bool in_use:8; /* is the management node open*/
char name[32];
char detail[55];
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
