RE: [PATCH] drivers/scsi/dpt_i2o: Convert to generic boolean

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



ACK

Sincerely -- Mark Salyzyn
 

> -----Original Message-----
> From: [email protected] 
> [mailto:[email protected]] On Behalf Of 
> Richard Knutsson
> Sent: Tuesday, October 30, 2007 6:54 AM
> To: [email protected]
> Cc: [email protected]; [email protected]; 
> Richard Knutsson
> Subject: [PATCH] drivers/scsi/dpt_i2o: Convert to generic boolean
> 
> Convert to use the generic boolean.
> 
> Signed-off-by: Richard Knutsson <[email protected]>
> ---
> Diffed against linus-git
> Checked with script/checkpatch.pl
>   (warned about long lines, but it is not introduced by this patch)
> 
>  dpt_i2o.c |   22 +++++++++++-----------
>  dpti.h    |    9 ++-------
>  2 files changed, 13 insertions(+), 18 deletions(-)
> 
> 
> diff --git a/drivers/scsi/dpt_i2o.c b/drivers/scsi/dpt_i2o.c
> index 8258506..bd3a82d 100644
> --- a/drivers/scsi/dpt_i2o.c
> +++ b/drivers/scsi/dpt_i2o.c
> @@ -252,7 +252,7 @@ rebuild_sys_tab:
>  			adpt_i2o_delete_hba(pHba);
>  			continue;
>  		}
> -		pHba->initialized = TRUE;
> +		pHba->initialized = true;
>  		pHba->state &= ~DPTI_STATE_RESET;
>  		scsi_scan_host(pHba->host);
>  	}
> @@ -519,7 +519,7 @@ static int adpt_proc_info(struct 
> Scsi_Host *host, char *buffer, char **start, of
>  	int unit;
>  
>  	*start = buffer;
> -	if (inout == TRUE) {
> +	if (inout) {
>  		/*
>  		 * The user has done a write and wants us to take the
>  		 * data in the buffer and do something with it.
> @@ -893,7 +893,7 @@ static int adpt_install_hba(struct pci_dev* pDev)
>  	void __iomem *base_addr_virt = NULL;
>  	void __iomem *msg_addr_virt = NULL;
>  
> -	int raptorFlag = FALSE;
> +	bool raptorFlag = false;
>  
>  	if(pci_enable_device(pDev)) {
>  		return -EINVAL;
> @@ -926,7 +926,7 @@ static int adpt_install_hba(struct pci_dev* pDev)
>  		// Use BAR1 in this configuration
>  		base_addr1_phys = pci_resource_start(pDev,1);
>  		hba_map1_area_size = pci_resource_len(pDev,1);
> -		raptorFlag = TRUE;
> +		raptorFlag = true;
>  	}
>  
>  	base_addr_virt = ioremap(base_addr0_phys,hba_map0_area_size);
> @@ -936,7 +936,7 @@ static int adpt_install_hba(struct pci_dev* pDev)
>  		return -EINVAL;
>  	}
>  
> -        if(raptorFlag == TRUE) {
> +	if (raptorFlag) {
>  		msg_addr_virt = ioremap(base_addr1_phys, 
> hba_map1_area_size );
>  		if (!msg_addr_virt) {
>  			PERROR("dpti: adpt_config_hba: io remap 
> failed on BAR1\n");
> @@ -996,7 +996,7 @@ static int adpt_install_hba(struct pci_dev* pDev)
>  	spin_lock_init(&pHba->state_lock);
>  	spin_lock_init(&adpt_post_wait_lock);
>  
> -	if(raptorFlag == 0){
> +	if (!raptorFlag) {
>  		printk(KERN_INFO"Adaptec I2O RAID controller %d 
> at %p size=%x irq=%d\n", 
>  			hba_count-1, base_addr_virt, 
> hba_map0_area_size, pDev->irq);
>  	} else {
> @@ -1273,7 +1273,7 @@ static s32 adpt_i2o_reset_hba(adpt_hba* pHba)
>  	u32 m = EMPTY_QUEUE ;
>  	ulong timeout = jiffies + (TMOUT_IOPRESET*HZ);
>  
> -	if(pHba->initialized  == FALSE) {	// First time 
> reset should be quick
> +	if (!pHba->initialized) {	/* First time reset 
> should be quick */
>  		timeout = jiffies + (25*HZ);
>  	} else {
>  		adpt_i2o_quiesce_hba(pHba);
> @@ -1576,7 +1576,7 @@ static int adpt_open(struct inode 
> *inode, struct file *file)
>  //		return -EBUSY;
>  //	}
>  
> -	pHba->in_use = 1;
> +	pHba->in_use = true;
>  	mutex_unlock(&adpt_configuration_lock);
>  
>  	return 0;
> @@ -1602,7 +1602,7 @@ static int adpt_close(struct inode 
> *inode, struct file *file)
>  		return -ENXIO;
>  	}
>  
> -	pHba->in_use = 0;
> +	pHba->in_use = false;
>  
>  	return 0;
>  }
> @@ -2433,8 +2433,8 @@ static s32 adpt_i2o_reparse_lct(adpt_hba* pHba)
>  						pDev->tid = tid;
>  						
> memcpy(&d->lct_data, &lct->lct_entry[i], sizeof(i2o_lct_entry));
>  						if (pDev->pScsi_dev) {
> -							
> pDev->pScsi_dev->changed = TRUE;
> -							
> pDev->pScsi_dev->removable = TRUE;
> +							
> pDev->pScsi_dev->changed = true;
> +							
> pDev->pScsi_dev->removable = true;
>  						}
>  					}
>  					// Found it - mark it scanned
> diff --git a/drivers/scsi/dpti.h b/drivers/scsi/dpti.h
> index 0892f6c..5eb7274 100644
> --- a/drivers/scsi/dpti.h
> +++ b/drivers/scsi/dpti.h
> @@ -155,11 +155,6 @@ static int adpt_device_reset(struct 
> scsi_cmnd* cmd);
>  #define I2O_SCSI_DSC_QUEUE_FROZEN           0x4000
>  
>  
> -#ifndef TRUE
> -#define TRUE                  1
> -#define FALSE                 0
> -#endif
> -
>  #define HBA_FLAGS_INSTALLED_B       0x00000001	// 
> Adapter Was Installed
>  #define HBA_FLAGS_BLINKLED_B        0x00000002	// 
> Adapter In Blink LED State
>  #define HBA_FLAGS_IN_RESET	0x00000040	/* in reset */
> @@ -209,8 +204,8 @@ typedef struct _adpt_hba {
>  	spinlock_t state_lock;
>  	int unit;
>  	int host_no;		/* SCSI host number */
> -	u8 initialized;
> -	u8 in_use;		/* is the management node open*/
> +	bool initialized:8;
> +	bool in_use:8;		/* is the management node open*/
>  
>  	char name[32];
>  	char detail[55];
> -
> To unsubscribe from this list: send the line "unsubscribe 
> linux-scsi" in
> the body of a message to [email protected]
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> 
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[Index of Archives]     [Kernel Newbies]     [Netfilter]     [Bugtraq]     [Photo]     [Stuff]     [Gimp]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Video 4 Linux]     [Linux for the blind]     [Linux Resources]
  Powered by Linux