[PATCH] KJ: Make i8259_64 more _32-like

[Paul Jimenez <pj@place.org>]

Howdy! Here's a simple janitorish patch for you:

This patch mainly hinges around two includes and their ramifications:

#include <i8259.h>	which provides cached_{slave,master}_mask
#include <io_ports.h>	which provides PIC_{MASTER,SLAVE}_{IMR,CMD} 

Adding these two includes and using those half dozen or so definitions
removed 140+ lines of diffs between i8259_32.c and i8259_64.c, thus
making it easier for the real substantitive differences between them to
show up, and hopefully therefore making it easier to eventually merge
the two.

diff --git a/arch/x86/kernel/i8259_64.c b/arch/x86/kernel/i8259_64.c
index 3f27ea0..a389db1 100644
--- a/arch/x86/kernel/i8259_64.c
+++ b/arch/x86/kernel/i8259_64.c
@@ -21,6 +21,9 @@
 #include <asm/delay.h>
 #include <asm/desc.h>
 #include <asm/apic.h>
+#include <asm/i8259.h>
+
+#include <io_ports.h>
 
 /*
  * Common place to define all x86 IRQ vectors
@@ -116,10 +119,6 @@ static struct irq_chip i8259A_chip = {
  */
 static unsigned int cached_irq_mask = 0xffff;
 
-#define __byte(x,y) 	(((unsigned char *)&(y))[x])
-#define cached_21	(__byte(0,cached_irq_mask))
-#define cached_A1	(__byte(1,cached_irq_mask))
-
 /*
  * Not all IRQs can be routed through the IO-APIC, eg. on certain (older)
  * boards the timer interrupt is not really connected to any IO-APIC pin,
@@ -139,9 +138,9 @@ void disable_8259A_irq(unsigned int irq)
 	spin_lock_irqsave(&i8259A_lock, flags);
 	cached_irq_mask |= mask;
 	if (irq & 8)
-		outb(cached_A1,0xA1);
+		outb(cached_slave_mask, PIC_SLAVE_IMR);
 	else
-		outb(cached_21,0x21);
+		outb(cached_master_mask, PIC_MASTER_IMR);
 	spin_unlock_irqrestore(&i8259A_lock, flags);
 }
 
@@ -153,9 +152,9 @@ void enable_8259A_irq(unsigned int irq)
 	spin_lock_irqsave(&i8259A_lock, flags);
 	cached_irq_mask &= mask;
 	if (irq & 8)
-		outb(cached_A1,0xA1);
+		outb(cached_slave_mask, PIC_SLAVE_IMR);
 	else
-		outb(cached_21,0x21);
+		outb(cached_master_mask, PIC_MASTER_IMR);
 	spin_unlock_irqrestore(&i8259A_lock, flags);
 }
 
@@ -167,9 +166,9 @@ int i8259A_irq_pending(unsigned int irq)
 
 	spin_lock_irqsave(&i8259A_lock, flags);
 	if (irq < 8)
-		ret = inb(0x20) & mask;
+		ret = inb(PIC_MASTER_CMD) & mask;
 	else
-		ret = inb(0xA0) & (mask >> 8);
+		ret = inb(PIC_SLAVE_CMD) & (mask >> 8);
 	spin_unlock_irqrestore(&i8259A_lock, flags);
 
 	return ret;
@@ -196,14 +195,14 @@ static inline int i8259A_irq_real(unsigned int irq)
 	int irqmask = 1<<irq;
 
 	if (irq < 8) {
-		outb(0x0B,0x20);		/* ISR register */
-		value = inb(0x20) & irqmask;
-		outb(0x0A,0x20);		/* back to the IRR register */
+		outb(0x0B,PIC_MASTER_CMD);	/* ISR register */
+		value = inb(PIC_MASTER_CMD) & irqmask;
+		outb(0x0A,PIC_MASTER_CMD);	/* back to the IRR register */
 		return value;
 	}
-	outb(0x0B,0xA0);		/* ISR register */
-	value = inb(0xA0) & (irqmask >> 8);
-	outb(0x0A,0xA0);		/* back to the IRR register */
+	outb(0x0B,PIC_SLAVE_CMD);	/* ISR register */
+	value = inb(PIC_SLAVE_CMD) & (irqmask >> 8);
+	outb(0x0A,PIC_SLAVE_CMD);	/* back to the IRR register */
 	return value;
 }
 
@@ -240,14 +239,14 @@ static void mask_and_ack_8259A(unsigned int irq)
 
 handle_real_irq:
 	if (irq & 8) {
-		inb(0xA1);		/* DUMMY - (do we need this?) */
-		outb(cached_A1,0xA1);
-		outb(0x60+(irq&7),0xA0);/* 'Specific EOI' to slave */
-		outb(0x62,0x20);	/* 'Specific EOI' to master-IRQ2 */
+		inb(PIC_SLAVE_IMR);	/* DUMMY - (do we need this?) */
+		outb(cached_slave_mask, PIC_SLAVE_IMR);
+		outb(0x60+(irq&7),PIC_SLAVE_CMD);/* 'Specific EOI' to slave */
+		outb(0x60+PIC_CASCADE_IR,PIC_MASTER_CMD); /* 'Specific EOI' to master-IRQ2 */
 	} else {
-		inb(0x21);		/* DUMMY - (do we need this?) */
-		outb(cached_21,0x21);
-		outb(0x60+irq,0x20);	/* 'Specific EOI' to master */
+		inb(PIC_MASTER_IMR);	/* DUMMY - (do we need this?) */
+		outb(cached_master_mask, PIC_MASTER_IMR);
+		outb(0x60+irq,PIC_MASTER_CMD);	/* 'Specific EOI' to master */
 	}
 	spin_unlock_irqrestore(&i8259A_lock, flags);
 	return;
@@ -283,51 +282,6 @@ spurious_8259A_irq:
 	}
 }
 
-void init_8259A(int auto_eoi)
-{
-	unsigned long flags;
-
-	i8259A_auto_eoi = auto_eoi;
-
-	spin_lock_irqsave(&i8259A_lock, flags);
-
-	outb(0xff, 0x21);	/* mask all of 8259A-1 */
-	outb(0xff, 0xA1);	/* mask all of 8259A-2 */
-
-	/*
-	 * outb_p - this has to work on a wide range of PC hardware.
-	 */
-	outb_p(0x11, 0x20);	/* ICW1: select 8259A-1 init */
-	outb_p(IRQ0_VECTOR, 0x21);	/* ICW2: 8259A-1 IR0-7 mapped to 0x30-0x37 */
-	outb_p(0x04, 0x21);	/* 8259A-1 (the master) has a slave on IR2 */
-	if (auto_eoi)
-		outb_p(0x03, 0x21);	/* master does Auto EOI */
-	else
-		outb_p(0x01, 0x21);	/* master expects normal EOI */
-
-	outb_p(0x11, 0xA0);	/* ICW1: select 8259A-2 init */
-	outb_p(IRQ8_VECTOR, 0xA1);	/* ICW2: 8259A-2 IR0-7 mapped to 0x38-0x3f */
-	outb_p(0x02, 0xA1);	/* 8259A-2 is a slave on master's IR2 */
-	outb_p(0x01, 0xA1);	/* (slave's support for AEOI in flat mode
-				    is to be investigated) */
-
-	if (auto_eoi)
-		/*
-		 * in AEOI mode we just have to mask the interrupt
-		 * when acking.
-		 */
-		i8259A_chip.mask_ack = disable_8259A_irq;
-	else
-		i8259A_chip.mask_ack = mask_and_ack_8259A;
-
-	udelay(100);		/* wait for 8259A to initialize */
-
-	outb(cached_21, 0x21);	/* restore master IRQ mask */
-	outb(cached_A1, 0xA1);	/* restore slave IRQ mask */
-
-	spin_unlock_irqrestore(&i8259A_lock, flags);
-}
-
 static char irq_trigger[2];
 /**
  * ELCR registers (0x4d0, 0x4d1) control edge/level of IRQ
@@ -364,8 +318,8 @@ static int i8259A_shutdown(struct sys_device *dev)
 	 * the kernel initialization code can get it
 	 * out of.
 	 */
-	outb(0xff, 0x21);	/* mask all of 8259A-1 */
-	outb(0xff, 0xA1);	/* mask all of 8259A-1 */
+	outb(0xff, PIC_MASTER_IMR);	/* mask all of 8259A-1 */
+	outb(0xff, PIC_SLAVE_IMR);	/* mask all of 8259A-1 */
 	return 0;
 }
 
@@ -391,6 +345,53 @@ static int __init i8259A_init_sysfs(void)
 
 device_initcall(i8259A_init_sysfs);
 
+void init_8259A(int auto_eoi)
+{
+	unsigned long flags;
+
+	i8259A_auto_eoi = auto_eoi;
+
+	spin_lock_irqsave(&i8259A_lock, flags);
+
+	outb(0xff, PIC_MASTER_IMR);	/* mask all of 8259A-1 */
+	outb(0xff, PIC_SLAVE_IMR);	/* mask all of 8259A-2 */
+
+	/*
+	 * outb_p - this has to work on a wide range of PC hardware.
+	 */
+	outb_p(0x11, PIC_MASTER_CMD);	/* ICW1: select 8259A-1 init */
+	outb_p(IRQ0_VECTOR, PIC_MASTER_IMR);	/* ICW2: 8259A-1 IR0-7 mapped to 0x30-0x37 */
+	outb_p(0x04, PIC_MASTER_IMR);	/* 8259A-1 (the master) has a slave on IR2 */
+	if (auto_eoi)	/* master does Auto EOI */
+		outb_p(MASTER_ICW4_DEFAULT | PIC_ICW4_AEOI, PIC_MASTER_IMR);
+	else		/* master expects normal EOI */
+		outb_p(MASTER_ICW4_DEFAULT, PIC_MASTER_IMR);
+
+	outb_p(0x11, PIC_SLAVE_CMD);	/* ICW1: select 8259A-2 init */
+	outb_p(IRQ8_VECTOR, PIC_SLAVE_IMR);	/* ICW2: 8259A-2 IR0-7 mapped to 0x38-0x3f */
+	outb_p(PIC_CASCADE_IR, PIC_SLAVE_IMR);	/* 8259A-2 is a slave on master's IR2 */
+	outb_p(SLAVE_ICW4_DEFAULT, PIC_SLAVE_IMR); /* (slave's support for AEOI in flat mode is to be investigated) */
+
+	if (auto_eoi)
+		/*
+		 * In AEOI mode we just have to mask the interrupt
+		 * when acking.
+		 */
+		i8259A_chip.mask_ack = disable_8259A_irq;
+	else
+		i8259A_chip.mask_ack = mask_and_ack_8259A;
+
+	udelay(100);		/* wait for 8259A to initialize */
+
+	outb(cached_master_mask, PIC_MASTER_IMR); /* restore master IRQ mask */
+	outb(cached_slave_mask, PIC_SLAVE_IMR);	  /* restore slave IRQ mask */
+
+	spin_unlock_irqrestore(&i8259A_lock, flags);
+}
+
+
+
+
 /*
  * IRQ2 is cascade interrupt to second interrupt controller
  */

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/