Re: [PATCH 2.6.23] oProfile: op_model_athalon.c support for AMD Family10h (Barcelona) Performance Counters

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 

Yes,
I saw this about 3 minutes too late :-).
-Barry


oProfile Driver Module Patch for AMD Family10h Kernel 2.6.23

This patch is for controlling the upper 32bits of the event ctrl msrs.
This includes the upper 4 bits of the event select and the Guest Only and Host Only bits This patch is necessary to make Event Based Profiling work reliably on a Family 10h processor 

---
 op_model_athlon.c |   22 ++++++++++++++++------
 1 file changed, 16 insertions(+), 6 deletions(-)
---

Signed-off-by: Barry Kasindorf <[email protected]>
Signed-off-by: Robert Richter <[email protected]>
diff -Naur linux-2.6.23.orig/arch/i386/oprofile/op_model_athlon.c linux-2.6.23.pmc/arch/i386/oprofile/op_model_athlon.c --- linux-2.6.23.orig/arch/i386/oprofile/op_model_athlon.c 2007-10-09 16:31:38.000000000 -0400 +++ linux-2.6.23.pmc/arch/i386/oprofile/op_model_athlon.c 2007-10-15 11:02:39.000000000 -0400 
@@ -1,6 +1,6 @@
 /**
  * @file op_model_athlon.h
- * athlon / K7 model-specific MSR operations
+ * athlon / K7 / K8 / Family 10h model-specific MSR operations
  *
  * @remark Copyright 2002 OProfile authors
  * @remark Read the file COPYING
@@ -31,12 +31,16 @@
#define CTRL_WRITE(l,h,msrs,c) do {wrmsr(msrs->controls[(c)].addr, (l), (h));} while (0) 
 #define CTRL_SET_ACTIVE(n) (n |= (1<<22))
 #define CTRL_SET_INACTIVE(n) (n &= ~(1<<22))
-#define CTRL_CLEAR(x) (x &= (1<<21))
+#define CTRL_CLEAR_LO(x) (x &= (1<<21))
+#define CTRL_CLEAR_HI(x) ( x &= 0xfffffcf0 )
 #define CTRL_SET_ENABLE(val) (val |= 1<<20)
 #define CTRL_SET_USR(val,u) (val |= ((u & 1) << 16))
 #define CTRL_SET_KERN(val,k) (val |= ((k & 1) << 17))
 #define CTRL_SET_UM(val, m) (val |= (m << 8))
-#define CTRL_SET_EVENT(val, e) (val |= e)
+#define CTRL_SET_EVENT_LOW(val, e) (val |= (e & 0xff))
+#define CTRL_SET_EVENT_HIGH(val,e) (val |= ((e >> 8) & 0xf))
+#define CTRL_SET_HOST_ONLY(val, h) (val |= ((h & 1) << 9))
+#define CTRL_SET_GUEST_ONLY(val, h) (val |= ((h & 1) << 8))

 static unsigned long reset_value[NUM_COUNTERS];

@@ -70,7 +74,8 @@
 		if (unlikely(!CTRL_IS_RESERVED(msrs,i)))
 			continue;
 		CTRL_READ(low, high, msrs, i);
-		CTRL_CLEAR(low);
+		CTRL_CLEAR_LO(low);
+		CTRL_CLEAR_HI(high);
 		CTRL_WRITE(low, high, msrs, i);
 	}

@@ -89,12 +94,17 @@
 			CTR_WRITE(counter_config[i].count, msrs, i);

 			CTRL_READ(low, high, msrs, i);
-			CTRL_CLEAR(low);
+			CTRL_CLEAR_LO(low);
+			CTRL_CLEAR_HI(high);
 			CTRL_SET_ENABLE(low);
 			CTRL_SET_USR(low, counter_config[i].user);
 			CTRL_SET_KERN(low, counter_config[i].kernel);
 			CTRL_SET_UM(low, counter_config[i].unit_mask);
-			CTRL_SET_EVENT(low, counter_config[i].event);
+			CTRL_SET_EVENT_LOW(low, counter_config[i].event);
+			CTRL_SET_EVENT_HIGH(high, counter_config[i].event);
+			CTRL_SET_HOST_ONLY(high, 0);
+			CTRL_SET_GUEST_ONLY(high, 0);
+
 			CTRL_WRITE(low, high, msrs, i);
 		} else {
 			reset_value[i] = 0;



Robert Richter wrote:
> On 15.10.07 13:00:27, Barry Kasindorf wrote:
>> oProfile Driver Module Patch for AMD Family10h Kernel 2.6.23
>> This patch is for controlling the upper 32bits of the event ctrl msrs.
>> This includes the upper 4 bits of the event select and the Guest Only
>> and Host Only bits
>> This patch is necessary to make Event Based Profiling work reliably on a
>> Family10h processor
>>
>> ---
>>  op_model_athlon.c |   22 ++++++++++++++++------
>>  1 file changed, 16 insertions(+), 6 deletions(-)
>> ---
>>
>> Signed-off-by: Barry Kasindorf <[email protected]>
>> Signed-off-by: Robert Richter <[email protected]>
>>
>> diff -Naur linux-2.6.23.orig/arch/i386/oprofile/op_model_athlon.c
>> linux-2.6.23.pmc/arch/i386/oprofile/op_model_athlon.c
>> --- linux-2.6.23.orig/arch/i386/oprofile/op_model_athlon.c	2007-10-09
>> 16:31:38.000000000 -0400
>> +++ linux-2.6.23.pmc/arch/i386/oprofile/op_model_athlon.c	2007-10-15
>> 11:02:39.000000000 -0400
>
> []
>
>> @@ -70,7 +74,8 @@
>>  		if (unlikely(!CTRL_IS_RESERVED(msrs,i)))
>>  			continue;
>>  		CTRL_READ(low, high, msrs, i);
>> -		CTRL_CLEAR(low);
>> +		CTRL_CLEAR_LO(low);
>> +		CTRL_CLEAR_HI(low);
>
> Should be probably this:
>
> CTRL_CLEAR_HI(high);
>
>>  		CTRL_WRITE(low, high, msrs, i);
>>  	}
>>
>
> []
>



-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/
[Index of Archives]     [Kernel Newbies]     [Netfilter]     [Bugtraq]     [Photo]     [Stuff]     [Gimp]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Video 4 Linux]     [Linux for the blind]     [Linux Resources]
  Powered by Linux