On Fri, Oct 12, 2007 at 11:32:40PM +0200, Rafael J. Wysocki wrote:
> On Friday, 12 October 2007 06:31, Andrew Morton wrote:
> >
> > ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.23/2.6.23-mm1/
> >
> > - I've been largely avoiding applying anything since rc8-mm2 in an attempt
> > to stabilise things for the 2.6.23 merge.
> >
> > But that didn't stop all the subsystem maintainers from going nuts, with
> > the usual accuracy. We're up to a 37MB diff now, but it seems to be working
> > a bit better.
>
> I get many traces similar to the one below from it (w/ hotfixes):
>
> WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask()
This is from : WARN_ON(irqs_disabled()) in the cmp_call_function_mask
processor_idle.c is registering a acpi_processor_latency_notify
my code changed the notifier call from blocking_notifier_call_chain to
srcu_notifier_call_chain, because dynamic creation of notifier chains at
runtime where easier with the srcu_notifier_call_chain than the
blocking_notifier_call_chain.
As dynamic creation of PM_QOS parameters are no longer needed I can
change the notifiers back to match what was in lanency.c
However; looking at the call tree differences between
blockin_notifier_call_chain and srcu_notifier_call_chain I cannot see a
difference in irq enabling / disabling. I'm not confident this will
address this yet.
I'll change the PM_QOS params patch to use blocking notifiers and test
on a 64bit boot and see what happens. I've been needing to setup my
x86_64 dev box for a while now anyway.
thanks,
--mgross
>
> Call Trace:
> [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82
> [<ffffffff8021b2ea>] smp_call_function+0x23/0x25
> [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20
> [<ffffffff80437ace>] notifier_call_chain+0x33/0x65
> [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69
> [<ffffffff8024f07c>] pm_qos_add_requirement+0x24/0xd2
> [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11
> [<ffffffff8024ee6d>] update_target+0x71/0x76
> [<ffffffff8024f101>] pm_qos_add_requirement+0xa9/0xd2
> [<ffffffff88160bf9>] :snd_pcm:snd_pcm_hw_params+0x349/0x382
> [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc
> [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87
> [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f
> [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2
> [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199
> [<ffffffff8024b514>] remove_wait_queue+0x40/0x45
> [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2
> [<ffffffff8022f18e>] default_wake_function+0x0/0xf
> [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231
> [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39
> [<ffffffff80282e91>] vma_link+0xdd/0x10b
> [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a
> [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36
> [<ffffffff802a0896>] do_ioctl+0x2a/0x77
> [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e
> [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b
> [<ffffffff8020bfde>] system_call+0x7e/0x83
>
> Full dmesg attached.
>
> Greetings,
> Rafael
> Linux version 2.6.23-mm1 (rafael@albercik) (gcc version 4.1.2 20061115 (prerelease) (SUSE Linux)) #26 SMP Fri Oct 12 22:59:33 CEST 2007
> Command line: root=/dev/sda3 vga=792 resume=/dev/sda1 no_console_suspend
> BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 0000000077fd0000 (usable)
> BIOS-e820: 0000000077fd0000 - 0000000077fe5600 (reserved)
> BIOS-e820: 0000000077fe5600 - 0000000077ff8000 (ACPI NVS)
> BIOS-e820: 0000000077ff8000 - 0000000080000000 (reserved)
> BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
> BIOS-e820: 00000000fec00000 - 00000000fec02000 (reserved)
> BIOS-e820: 00000000ffbc0000 - 00000000ffcc0000 (reserved)
> BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
> Entering add_active_range(0, 0, 159) 0 entries of 256 used
> Entering add_active_range(0, 256, 491472) 1 entries of 256 used
> end_pfn_map = 1048576
> DMI 2.4 present.
> ACPI: RSDP 000F7D30, 0024 (r2 HP )
> ACPI: XSDT 77FE57B4, 0054 (r1 HP 0944 6070620 HP 1)
> ACPI: FACP 77FE5684, 00F4 (r4 HP 0944 3 HP 1)
> ACPI: DSDT 77FE58DC, EE7A (r1 HP SB400 10000 MSFT 100000E)
> ACPI: FACS 77FF7E80, 0040
> ACPI: APIC 77FE5808, 0062 (r1 HP 0944 1 HP 1)
> ACPI: MCFG 77FE586C, 003C (r1 HP 0944 1 HP 1)
> ACPI: TCPA 77FE58A8, 0032 (r2 HP 0944 1 HP 1)
> ACPI: SSDT 77FF4756, 0059 (r1 HP HPQNLP 1 MSFT 100000E)
> ACPI: SSDT 77FF47AF, 0206 (r1 HP PSSTBLID 1 HP 1)
> Entering add_active_range(0, 0, 159) 0 entries of 256 used
> Entering add_active_range(0, 256, 491472) 1 entries of 256 used
> No mptable found.
> sizeof(struct page) = 56
> Zone PFN ranges:
> DMA 0 -> 4096
> DMA32 4096 -> 1048576
> Normal 1048576 -> 1048576
> Movable zone start PFN for each node
> early_node_map[2] active PFN ranges
> 0: 0 -> 159
> 0: 256 -> 491472
> On node 0 totalpages: 491375
> Node 0 memmap at 0xffff810001000000 size 27525120 first pfn 0xffff810001000000
> DMA zone: 56 pages used for memmap
> DMA zone: 1481 pages reserved
> DMA zone: 2462 pages, LIFO batch:0
> DMA32 zone: 6663 pages used for memmap
> DMA32 zone: 480713 pages, LIFO batch:31
> Normal zone: 0 pages used for memmap
> Movable zone: 0 pages used for memmap
> ATI board detected. Disabling timer routing over 8254.
> ACPI: PM-Timer IO Port: 0x8008
> ACPI: Local APIC address 0xfee00000
> ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
> Processor #0 (Bootup-CPU)
> ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
> Processor #1
> ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
> ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
> IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23
> ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
> ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 21 low level)
> ACPI: IRQ0 used by override.
> ACPI: IRQ2 used by override.
> Setting APIC routing to flat
> Using ACPI (MADT) for SMP configuration information
> swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
> swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e0000
> swsusp: Registered nosave memory region: 00000000000e0000 - 0000000000100000
> Allocating PCI resources starting at 88000000 (gap: 80000000:60000000)
> SMP: Allowing 2 CPUs, 0 hotplug CPUs
> PERCPU: Allocating 46704 bytes of per cpu data
> Built 1 zonelists in Zone order, mobility grouping on. Total pages: 483175
> Kernel command line: root=/dev/sda3 vga=792 resume=/dev/sda1 no_console_suspend
> Initializing CPU#0
> PID hash table entries: 4096 (order: 12, 32768 bytes)
> Extended CMOS year: 2000
> TSC calibrated against PM_TIMER
> Marking TSC unstable due to TSCs unsynchronized
> time.c: Detected 1995.006 MHz processor.
> Console: colour dummy device 80x25
> console [tty0] enabled
> Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
> Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
> Checking aperture...
> CPU 0: aperture @ 108000000 size 32 MB
> Aperture too small (32 MB)
> No AGP bridge found
> Memory: 1923916k/1965888k available (2285k kernel code, 41360k reserved, 1517k data, 252k init)
> Calibrating delay using timer specific routine.. 3994.14 BogoMIPS (lpj=7988280)
> Security Framework initialized
> Capability LSM initialized
> Mount-cache hash table entries: 256
> CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
> CPU: L2 Cache: 512K (64 bytes/line)
> CPU: Physical Processor ID: 0
> CPU: Processor Core ID: 0
> SMP alternatives: switching to UP code
> ACPI: Core revision 20070126
> Parsing all Control Methods:
> Table [DSDT](id 0001) - 1153 Objects with 113 Devices 337 Methods 33 Regions
> Parsing all Control Methods:
> Table [SSDT](id 0002) - 2 Objects with 0 Devices 2 Methods 0 Regions
> Parsing all Control Methods:
> Table [SSDT](id 0003) - 8 Objects with 0 Devices 0 Methods 0 Regions
> tbxface-0598 [00] tb_load_namespace : ACPI Tables successfully acquired
> evxfevnt-0091 [00] enable : Transition to ACPI mode successful
> ..MP-BIOS bug: 8254 timer not connected to IO-APIC
> Disabling APIC timer
> SMP alternatives: switching to SMP code
> Booting processor 1/2 APIC 0x1
> Initializing CPU#1
> Calibrating delay using timer specific routine.. 3990.29 BogoMIPS (lpj=7980587)
> CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
> CPU: L2 Cache: 512K (64 bytes/line)
> CPU: Physical Processor ID: 0
> CPU: Processor Core ID: 1
> AMD Turion(tm) 64 X2 Mobile Technology TL-60 stepping 02
> Brought up 2 CPUs
> CPU0 attaching sched-domain:
> domain 0: span 00000000,00000000,00000000,00000003
> groups: 00000000,00000000,00000000,00000001 00000000,00000000,00000000,00000002
> CPU1 attaching sched-domain:
> domain 0: span 00000000,00000000,00000000,00000003
> groups: 00000000,00000000,00000000,00000002 00000000,00000000,00000000,00000001
> net_namespace: 120 bytes
> Time: 21:13:03 Date: 10/12/07
> NET: Registered protocol family 16
> ACPI: bus type pci registered
> PCI: Using configuration type 1
> evgpeblk-0956 [00] ev_create_gpe_block : GPE 00 to 1F [_GPE] 4 regs on int 0x15
> evgpeblk-1052 [00] ev_initialize_gpe_bloc: Found 3 Wake, Enabled 11 Runtime GPEs in this block
> ACPI: EC: Look up EC in DSDT
> Completing Region/Field/Buffer/Package initialization:................................................................................................................................................................
> Initialized 29/33 Regions 0/0 Fields 63/64 Buffers 68/78 Packages (1172 nodes)
> Initializing Device/Processor/Thermal objects by executing _INI methods:.......
> Executed 7 _INI methods requiring 2 _STA executions (examined 120 objects)
> ACPI: Interpreter enabled
> ACPI: (supports S0 S3 S4 S5)
> ACPI: Using IOAPIC for interrupt routing
> PCI: MCFG configuration 0: base 3758096384 segment 0 buses 0 - 255
> PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
> PCI: Using MMCONFIG at e0000000 - efffffff
> PCI: No mmconfig possible on device 00:18
> ACPI: EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62
> ACPI: PCI Root Bridge [C074] (0000:00)
> PCI: Transparent bridge - 0000:00:14.4
> ACPI: PCI Interrupt Routing Table [\_SB_.C074._PRT]
> ACPI: PCI Interrupt Routing Table [\_SB_.C074.C075._PRT]
> ACPI: PCI Interrupt Routing Table [\_SB_.C074.C0DF._PRT]
> ACPI: PCI Interrupt Link [C125] (IRQs 10 11) *0, disabled.
> ACPI: PCI Interrupt Link [C126] (IRQs 10 11) *0, disabled.
> ACPI: PCI Interrupt Link [C127] (IRQs 10 11) *0, disabled.
> ACPI: PCI Interrupt Link [C128] (IRQs 10 11) *0, disabled.
> ACPI: PCI Interrupt Link [C129] (IRQs 10 11) *0, disabled.
> ACPI: PCI Interrupt Link [C12A] (IRQs 9) *0, disabled.
> ACPI: PCI Interrupt Link [C12B] (IRQs 10 11) *0, disabled.
> ACPI: PCI Interrupt Link [C12C] (IRQs *10 11)
> ACPI: Power Resource [C223] (off)
> ACPI: Power Resource [C1FE] (off)
> ACPI: Power Resource [C217] (on)
> ACPI: Power Resource [C34B] (off)
> ACPI: Power Resource [C34C] (off)
> ACPI: Power Resource [C34D] (off)
> ACPI: Power Resource [C34E] (off)
> Linux Plug and Play Support v0.97 (c) Adam Belay
> pnp: PnP ACPI init
> ACPI: bus type pnp registered
> pnp: PnP ACPI: found 13 devices
> ACPI: ACPI bus type pnp unregistered
> SCSI subsystem initialized
> libata version 3.00 loaded.
> PCI: Using ACPI for IRQ routing
> PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
> PCI: Cannot allocate resource region 0 of device 0000:00:14.2
> NetLabel: Initializing
> NetLabel: domain hash size = 128
> NetLabel: protocols = UNLABELED CIPSOv4
> NetLabel: unlabeled traffic allowed by default
> DMAR:No DMAR devices found
> ACPI: RTC can wake from S4
> system 00:00: iomem range 0x0-0x9ffff could not be reserved
> system 00:00: iomem range 0xe0000-0xfffff could not be reserved
> system 00:00: iomem range 0x100000-0x77ffffff could not be reserved
> system 00:0a: ioport range 0x40b-0x40b has been reserved
> system 00:0a: ioport range 0x4d0-0x4d1 has been reserved
> system 00:0a: ioport range 0x4d6-0x4d6 has been reserved
> system 00:0a: iomem range 0xffb00000-0xffbfffff could not be reserved
> system 00:0a: iomem range 0xfff00000-0xffffffff could not be reserved
> system 00:0b: ioport range 0x8000-0x802f has been reserved
> system 00:0b: ioport range 0x8100-0x811f has been reserved
> system 00:0b: iomem range 0xe0000000-0xefffffff could not be reserved
> system 00:0b: iomem range 0xfec00000-0xfec00fff could not be reserved
> system 00:0c: iomem range 0xcf000-0xcffff has been reserved
> system 00:0c: iomem range 0x78000000-0x7fffffff could not be reserved
> system 00:0c: iomem range 0xfee00000-0xfee00fff could not be reserved
> PCI: Bridge: 0000:00:01.0
> IO window: 6000-6fff
> MEM window: d4300000-d43fffff
> PREFETCH window: c0000000-c7ffffff
> PCI: Bridge: 0000:00:04.0
> IO window: 4000-5fff
> MEM window: d0000000-d3ffffff
> PREFETCH window: disabled.
> PCI: Bridge: 0000:00:05.0
> IO window: 2000-3fff
> MEM window: cc000000-cfffffff
> PREFETCH window: disabled.
> PCI: Bridge: 0000:00:06.0
> IO window: disabled.
> MEM window: c8000000-c80fffff
> PREFETCH window: disabled.
> PCI: Bus 3, cardbus bridge: 0000:02:04.0
> IO window: 00001000-000010ff
> IO window: 00001400-000014ff
> PREFETCH window: 8c000000-8fffffff
> MEM window: 90000000-93ffffff
> PCI: Bridge: 0000:00:14.4
> IO window: disabled.
> MEM window: d4000000-d42fffff
> PREFETCH window: disabled.
> PCI: Setting latency timer of device 0000:00:04.0 to 64
> PCI: Setting latency timer of device 0000:00:05.0 to 64
> PCI: Setting latency timer of device 0000:00:06.0 to 64
> ACPI: PCI Interrupt 0000:02:04.0[A] -> GSI 20 (level, low) -> IRQ 20
> NET: Registered protocol family 2
> Time: acpi_pm clocksource has been installed.
> Clockevents: could not switch to one-shot mode:<6>Clockevents: could not switch to one-shot mode: lapic is not functional.
> Could not switch to high resolution mode on CPU 1
> lapic is not functional.
> Could not switch to high resolution mode on CPU 0
> IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
> TCP established hash table entries: 131072 (order: 9, 3145728 bytes)
> TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
> TCP: Hash tables configured (established 131072 bind 65536)
> TCP reno registered
> checking if image is initramfs... it is
> Freeing initrd memory: 5282k freed
> audit: initializing netlink socket (disabled)
> audit(1192223582.968:1): initialized
> Total HugeTLB memory allocated, 0
> VFS: Disk quotas dquot_6.5.1
> Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
> io scheduler noop registered
> io scheduler anticipatory registered
> io scheduler deadline registered
> io scheduler cfq registered (default)
> PCI: MSI quirk detected. MSI deactivated.
> Boot video device is 0000:01:05.0
> PCI: Setting latency timer of device 0000:00:04.0 to 64
> assign_interrupt_mode Found MSI capability
> Allocate Port Service[0000:00:04.0:pcie00]
> Allocate Port Service[0000:00:04.0:pcie01]
> Allocate Port Service[0000:00:04.0:pcie03]
> PCI: Setting latency timer of device 0000:00:05.0 to 64
> assign_interrupt_mode Found MSI capability
> Allocate Port Service[0000:00:05.0:pcie00]
> Allocate Port Service[0000:00:05.0:pcie01]
> Allocate Port Service[0000:00:05.0:pcie03]
> PCI: Setting latency timer of device 0000:00:06.0 to 64
> assign_interrupt_mode Found MSI capability
> Allocate Port Service[0000:00:06.0:pcie00]
> Allocate Port Service[0000:00:06.0:pcie01]
> Allocate Port Service[0000:00:06.0:pcie03]
> AER service couldn't init device 0000:00:04.0:pcie01 - no _OSC support
> AER service couldn't init device 0000:00:05.0:pcie01 - no _OSC support
> AER service couldn't init device 0000:00:06.0:pcie01 - no _OSC support
> vesafb: framebuffer at 0xc0000000, mapped to 0xffffc20010100000, using 4608k, total 16384k
> vesafb: mode is 1024x768x24, linelength=3072, pages=6
> vesafb: scrolling: redraw
> vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
> Console: switching to colour frame buffer device 128x48
> fb0: VESA VGA frame buffer device
> Real Time Clock Driver v1.12ac
> Non-volatile memory driver v1.2
> Linux agpgart interface v0.102
> Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
> RAMDISK driver initialized: 16 RAM disks of 128000K size 1024 blocksize
> sata_sil 0000:00:12.0: version 2.3
> ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 16 (level, low) -> IRQ 16
> scsi0 : sata_sil
> scsi1 : sata_sil
> ata1: SATA max UDMA/100 mmio m512@0xd4409000 tf 0xd4409080 irq 16
> ata2: SATA max UDMA/100 mmio m512@0xd4409000 tf 0xd44090c0 irq 16
> ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
> ata1.00: ATA-7: FUJITSU MHV2080BH, 892C, max UDMA/100
> ata1.00: 156301488 sectors, multi 16: LBA48
> ata1.00: configured for UDMA/100
> ata2: SATA link down (SStatus 0 SControl 300)
> scsi 0:0:0:0: Direct-Access ATA FUJITSU MHV2080B 892C PQ: 0 ANSI: 5
> sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
> sd 0:0:0:0: [sda] Write Protect is off
> sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
> sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
> sd 0:0:0:0: [sda] Write Protect is off
> sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
> sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 >
> sd 0:0:0:0: [sda] Attached SCSI disk
> PNP: PS/2 Controller [PNP0303:C214,PNP0f13:C215] at 0x60,0x64 irq 1,12
> i8042.c: Detected active multiplexing controller, rev 1.1.
> serio: i8042 KBD port at 0x60,0x64 irq 1
> serio: i8042 AUX0 port at 0x60,0x64 irq 12
> serio: i8042 AUX1 port at 0x60,0x64 irq 12
> serio: i8042 AUX2 port at 0x60,0x64 irq 12
> serio: i8042 AUX3 port at 0x60,0x64 irq 12
> mice: PS/2 mouse device common for all mice
> input: PC Speaker as /class/input/input0
> input: AT Translated Set 2 keyboard as /class/input/input1
> NET: Registered protocol family 1
> swsusp: Resume From Partition /dev/sda1
> PM: Checking swsusp image.
> PM: Resume from disk failed.
> registered taskstats version 1
> Magic number: 11:322:247
> Freeing unused kernel memory: 252k freed
> Write protecting the kernel read-only data: 1124k
> sd 0:0:0:0: Attached scsi generic sg0 type 0
> Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
> ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
> ATIIXP: IDE controller (0x1002:0x4376 rev 0x80) at PCI slot 0000:00:14.1
> ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 16
> ATIIXP: not 100% native mode: will probe irqs later
> ide0: BM-DMA at 0x7040-0x7047, BIOS settings: hda:DMA, hdb:pio
> ATIIXP: simplex device: DMA disabled
> ide1: ATIIXP Bus-Master DMA disabled (BIOS)
> Probing IDE interface ide0...
> hda: HL-DT-ST DVDRAM GMA-4082N, ATAPI CD/DVD-ROM drive
> hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
> hda: selected mode 0x22
> ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
> Probing IDE interface ide1...
> BIOS EDD facility v0.16 2004-Jun-25, 6 devices found
> swsusp: Marking nosave pages: 000000000009f000 - 0000000000100000
> swsusp: Basic memory bitmaps created
> swsusp: Basic memory bitmaps freed
> Attempting manual resume
> swsusp: Resume From Partition 8:1
> PM: Checking swsusp image.
> PM: Resume from disk failed.
> kjournald starting. Commit interval 5 seconds
> EXT3 FS on sda3, internal journal
> EXT3-fs: mounted filesystem with ordered data mode.
> ieee80211_crypt: registered algorithm 'NULL'
> ieee80211: 802.11 data/management/control stack, git-1.1.13
> ieee80211: Copyright (C) 2004-2005 Intel Corporation <[email protected]>
> Floppy drive(s): fd0 is 1.44M
> bcm43xx driver
> ACPI: PCI Interrupt 0000:30:00.0[A] -> GSI 18 (level, low) -> IRQ 18
> PCI: Setting latency timer of device 0000:30:00.0 to 64
> bcm43xx: Chip ID 0x4311, rev 0x1
> bcm43xx: Number of cores: 4
> bcm43xx: Core 0: ID 0x800, rev 0x11, vendor 0x4243
> bcm43xx: Core 1: ID 0x812, rev 0xa, vendor 0x4243
> bcm43xx: Core 2: ID 0x817, rev 0x3, vendor 0x4243
> bcm43xx: Core 3: ID 0x820, rev 0x1, vendor 0x4243
> bcm43xx: PHY connected
> bcm43xx: Detected PHY: Analog: 4, Type 2, Revision 8
> bcm43xx: Detected Radio: ID: 2205017f (Manuf: 17f Ver: 2050 Rev: 2)
> bcm43xx: Radio initialized
> bcm43xx: Radio initialized
> ACPI: PCI Interrupt 0000:00:14.2[A] -> GSI 16 (level, low) -> IRQ 16
> sdhci: Secure Digital Host Controller Interface driver
> sdhci: Copyright(c) Pierre Ossman
> tg3.c:v3.82 (October 5, 2007)
> eth0 renamed to eth1
> sysfs: duplicate filename 'eth1' can not be created
> WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/fs/sysfs/dir.c:416 sysfs_add_one()
>
> Call Trace:
> [<ffffffff802da54e>] sysfs_add_one+0x5c/0xc9
> [<ffffffff802db415>] sysfs_create_link+0xd1/0x12c
> [<ffffffff80382e0a>] device_rename+0x17a/0x1db
> [<ffffffff803d6c9d>] dev_change_name+0x13c/0x234
> [<ffffffff803d6f99>] dev_ifsioc+0x204/0x2d0
> [<ffffffff803d7585>] dev_ioctl+0x520/0x633
> [<ffffffff8027ef6a>] handle_mm_fault+0x1f6/0x6e5
> [<ffffffff8030cb16>] __up_read+0x8f/0x97
> [<ffffffff803c9d4d>] sock_ioctl+0x1fe/0x20c
> [<ffffffff802a0896>] do_ioctl+0x2a/0x77
> [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e
> [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b
> [<ffffffff8020bfde>] system_call+0x7e/0x83
>
> net eth1: device_rename: sysfs_create_symlink failed (-17)
> ACPI: PCI Interrupt 0000:02:01.0[A] -> GSI 23 (level, low) -> IRQ 23
> eth0: Tigon3 [partno(BCM95788A50) rev 3003 PHY(5705)] (PCI:33MHz:32-bit) 10/100/1000Base-T Ethernet 00:17:08:2e:2e:f3
> eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[0] TSOcap[1]
> eth0: dma_rwctrl[763f0000] dma_mask[32-bit]
> piix4_smbus 0000:00:14.0: Found 0000:00:14.0 device
> sdhci: SDHCI controller found at 0000:02:04.3 [104c:803c] (rev 0)
> ACPI: PCI Interrupt 0000:02:04.3[A] -> GSI 20 (level, low) -> IRQ 20
> mmc0: SDHCI at 0xd4019000 irq 20 PIO
> usbcore: registered new interface driver usbfs
> usbcore: registered new interface driver hub
> usbcore: registered new device driver usb
> ACPI: PCI Interrupt 0000:02:04.1[A] -> GSI 20 (level, low) -> IRQ 20
> ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[20] MMIO=[d4011000-d40117ff] Max Packet=[2048] IR/IT contexts=[4/8]
> ehci_hcd: block sizes: qh 160 qtd 96 itd 192 sitd 96
> ACPI: PCI Interrupt 0000:00:13.2[A] -> GSI 19 (level, low) -> IRQ 19
> ehci_hcd 0000:00:13.2: EHCI Host Controller
> /home/rafael/src/mm/linux-2.6.23-mm1/drivers/usb/core/inode.c: creating file 'devices'
> /home/rafael/src/mm/linux-2.6.23-mm1/drivers/usb/core/inode.c: creating file '001'
> ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 1
> ehci_hcd 0000:00:13.2: reset hcs_params 0x2408 dbg=0 cc=2 pcc=4 ordered !ppc ports=8
> ehci_hcd 0000:00:13.2: reset hcc_params a012 thresh 1 uframes 256/512/1024
> ehci_hcd 0000:00:13.2: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT
> ehci_hcd 0000:00:13.2: MWI active
> ehci_hcd 0000:00:13.2: irq 19, io mem 0xd4403000
> ehci_hcd 0000:00:13.2: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT
> ehci_hcd 0000:00:13.2: init command 010009 (park)=0 ithresh=1 period=256 RUN
> ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
> usb usb1: default language 0x0409
> usb usb1: uevent
> usb usb1: usb_probe_device
> usb usb1: configuration #1 chosen from 1 choice
> usb usb1: adding 1-0:1.0 (config #1, interface 0)
> usb 1-0:1.0: uevent
> usb 1-0:1.0: uevent
> hub 1-0:1.0: usb_probe_interface
> hub 1-0:1.0: usb_probe_interface - got id
> hub 1-0:1.0: USB hub found
> hub 1-0:1.0: 8 ports detected
> hub 1-0:1.0: standalone hub
> hub 1-0:1.0: no power switching (usb 1.0)
> hub 1-0:1.0: individual port over-current protection
> hub 1-0:1.0: Single TT
> hub 1-0:1.0: TT requires at most 8 FS bit times (666 ns)
> hub 1-0:1.0: power on to power good time: 20ms
> hub 1-0:1.0: local power source is good
> hub 1-0:1.0: trying to enable port power on non-switchable hub
> hda: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, DMA
> Uniform CD-ROM driver Revision: 3.20
> ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
> ohci_hcd: block sizes: ed 80 td 96
> pci_hotplug: PCI Hot Plug PCI Core version: 0.5
> hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0000
> /home/rafael/src/mm/linux-2.6.23-mm1/drivers/usb/core/inode.c: creating file '001'
> usb usb1: new device found, idVendor=0000, idProduct=0000
> ehci_hcd 0000:00:13.2: GetStatus port 2 status 001803 POWER sig=j CSC CONNECT
> hub 1-0:1.0: port 2, status 0501, change 0001, 480 Mb/s
> usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1
> usb usb1: Product: EHCI Host Controller
> usb usb1: Manufacturer: Linux 2.6.23-mm1 ehci_hcd
> usb usb1: SerialNumber: 0000:00:13.2
> hub 1-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x501
> ACPI: PCI Interrupt 0000:02:04.2[A] -> GSI 20 (level, low) -> IRQ 20
> Yenta: CardBus bridge found at 0000:02:04.0 [103c:30b0]
> ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 19 (level, low) -> IRQ 19
> Yenta: Enabling burst memory read transactions
> ohci_hcd 0000:00:13.0: OHCI Host Controller
> /home/rafael/src/mm/linux-2.6.23-mm1/drivers/usb/core/inode.c: creating file '002'
> ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2
> ohci_hcd 0000:00:13.0: created debug files
> ohci_hcd 0000:00:13.0: irq 19, io mem 0xd4401000
> Yenta: Using INTVAL to route CSC interrupts to PCI
> Yenta: Routing CardBus interrupts to PCI
> Yenta TI: socket 0000:02:04.0, mfunc 0x01a11002, devctl 0x64
> ehci_hcd 0000:00:13.2: port 2 full speed --> companion
> ehci_hcd 0000:00:13.2: GetStatus port 2 status 003801 POWER OWNER sig=j CONNECT
> hub 1-0:1.0: port 2 not reset yet, waiting 50ms
> ohci_hcd 0000:00:13.0: OHCI controller state
> ohci_hcd 0000:00:13.0: OHCI 1.0, NO legacy support registers
> ohci_hcd 0000:00:13.0: control 0x083 HCFS=operational CBSR=3
> ohci_hcd 0000:00:13.0: cmdstatus 0x00000 SOC=0
> ohci_hcd 0000:00:13.0: intrstatus 0x00000004 SF
> ohci_hcd 0000:00:13.0: intrenable 0x8000005a MIE RHSC UE RD WDH
> ohci_hcd 0000:00:13.0: hcca frame #0005
> ohci_hcd 0000:00:13.0: roothub.a 02000204 POTPGT=2 NPS NDP=4(4)
> ohci_hcd 0000:00:13.0: roothub.b 00000000 PPCM=0000 DR=0000
> ohci_hcd 0000:00:13.0: roothub.status 00008000 DRWE
> ohci_hcd 0000:00:13.0: roothub.portstatus [0] 0x00000100 PPS
> ohci_hcd 0000:00:13.0: roothub.portstatus [1] 0x00010100 CSC PPS
> ohci_hcd 0000:00:13.0: roothub.portstatus [2] 0x00000100 PPS
> ohci_hcd 0000:00:13.0: roothub.portstatus [3] 0x00000100 PPS
> usb usb2: default language 0x0409
> usb usb2: uevent
> usb usb2: usb_probe_device
> usb usb2: configuration #1 chosen from 1 choice
> ehci_hcd 0000:00:13.2: GetStatus port 2 status 003002 POWER OWNER sig=se0 CSC
> ehci_hcd 0000:00:13.2: GetStatus port 3 status 001803 POWER sig=j CSC CONNECT
> hub 1-0:1.0: port 3, status 0501, change 0001, 480 Mb/s
> usb usb2: adding 2-0:1.0 (config #1, interface 0)
> usb 2-0:1.0: uevent
> usb 2-0:1.0: uevent
> hub 2-0:1.0: usb_probe_interface
> hub 2-0:1.0: usb_probe_interface - got id
> hub 2-0:1.0: USB hub found
> hub 2-0:1.0: 4 ports detected
> hub 2-0:1.0: standalone hub
> hub 2-0:1.0: no power switching (usb 1.0)
> hub 2-0:1.0: global over-current protection
> hub 2-0:1.0: power on to power good time: 4ms
> hub 2-0:1.0: local power source is good
> hub 2-0:1.0: no over-current condition exists
> hub 2-0:1.0: trying to enable port power on non-switchable hub
> rtc_cmos: probe of 00:07 failed with error -16
> hub 1-0:1.0: debounce: port 3: total 100ms stable 100ms status 0x501
> Yenta: ISA IRQ mask 0x0eb8, PCI irq 20
> ehci_hcd 0000:00:13.2: port 3 full speed --> companion
> ehci_hcd 0000:00:13.2: GetStatus port 3 status 003801 POWER OWNER sig=j CONNECT
> hub 1-0:1.0: port 3 not reset yet, waiting 50ms
> Socket status: 30000006
> /home/rafael/src/mm/linux-2.6.23-mm1/drivers/usb/core/inode.c: creating file '001'
> usb usb2: new device found, idVendor=0000, idProduct=0000
> usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1
> usb usb2: Product: OHCI Host Controller
> usb usb2: Manufacturer: Linux 2.6.23-mm1 ohci_hcd
> usb usb2: SerialNumber: 0000:00:13.0
> ehci_hcd 0000:00:13.2: GetStatus port 3 status 003002 POWER OWNER sig=se0 CSC
> ehci_hcd 0000:00:13.2: GetStatus port 6 status 001403 POWER sig=k CSC CONNECT
> hub 1-0:1.0: port 6, status 0501, change 0001, 480 Mb/s
> Yenta: Raising subordinate bus# of parent bus (#02) from #03 to #06
> hub 1-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x501
> ehci_hcd 0000:00:13.2: port 6 low speed --> companion
> pcmcia: parent PCI bridge Memory window: 0xd4000000 - 0xd42fffff
> shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
> ACPI: PCI Interrupt 0000:00:13.1[A] -> GSI 19 (level, low) -> IRQ 19
> ohci_hcd 0000:00:13.1: OHCI Host Controller
> ehci_hcd 0000:00:13.2: GetStatus port 6 status 003002 POWER OWNER sig=se0 CSC
> hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0040
> hub 2-0:1.0: state 7 ports 4 chg 0000 evt 0004
> ohci_hcd 0000:00:13.0: GetStatus roothub.portstatus [1] = 0x00010101 CSC PPS CCS
> hub 2-0:1.0: port 2, status 0101, change 0001, 12 Mb/s
> /home/rafael/src/mm/linux-2.6.23-mm1/drivers/usb/core/inode.c: creating file '003'
> ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3
> ohci_hcd 0000:00:13.1: created debug files
> ohci_hcd 0000:00:13.1: irq 19, io mem 0xd4402000
> hub 2-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x101
> ohci_hcd 0000:00:13.1: OHCI controller state
> ohci_hcd 0000:00:13.1: OHCI 1.0, NO legacy support registers
> ohci_hcd 0000:00:13.1: control 0x083 HCFS=operational CBSR=3
> ohci_hcd 0000:00:13.1: cmdstatus 0x00000 SOC=0
> ohci_hcd 0000:00:13.1: intrstatus 0x00000004 SF
> ohci_hcd 0000:00:13.1: intrenable 0x8000005a MIE RHSC UE RD WDH
> ohci_hcd 0000:00:13.1: hcca frame #0005
> ohci_hcd 0000:00:13.1: roothub.a 02000204 POTPGT=2 NPS NDP=4(4)
> ohci_hcd 0000:00:13.1: roothub.b 00000000 PPCM=0000 DR=0000
> ohci_hcd 0000:00:13.1: roothub.status 00008000 DRWE
> ohci_hcd 0000:00:13.1: roothub.portstatus [0] 0x00010100 CSC PPS
> ohci_hcd 0000:00:13.1: roothub.portstatus [1] 0x00000100 PPS
> ohci_hcd 0000:00:13.1: roothub.portstatus [2] 0x00010100 CSC PPS
> ohci_hcd 0000:00:13.1: roothub.portstatus [3] 0x00000100 PPS
> usb usb3: default language 0x0409
> usb usb3: uevent
> usb usb3: usb_probe_device
> usb usb3: configuration #1 chosen from 1 choice
> usb usb3: adding 3-0:1.0 (config #1, interface 0)
> usb 3-0:1.0: uevent
> usb 3-0:1.0: uevent
> hub 3-0:1.0: usb_probe_interface
> hub 3-0:1.0: usb_probe_interface - got id
> hub 3-0:1.0: USB hub found
> hub 3-0:1.0: 4 ports detected
> hub 3-0:1.0: standalone hub
> hub 3-0:1.0: no power switching (usb 1.0)
> hub 3-0:1.0: global over-current protection
> hub 3-0:1.0: power on to power good time: 4ms
> hub 3-0:1.0: local power source is good
> hub 3-0:1.0: no over-current condition exists
> hub 3-0:1.0: trying to enable port power on non-switchable hub
> ohci_hcd 0000:00:13.0: GetStatus roothub.portstatus [1] = 0x00100103 PRSC PPS PES CCS
> ieee1394: Host added: ID:BUS[0-00:1023] GUID[00023f9929613f0c]
> usb 2-2: new full speed USB device using ohci_hcd and address 2
> /home/rafael/src/mm/linux-2.6.23-mm1/drivers/usb/core/inode.c: creating file '001'
> usb usb3: new device found, idVendor=0000, idProduct=0000
> usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1
> usb usb3: Product: OHCI Host Controller
> usb usb3: Manufacturer: Linux 2.6.23-mm1 ohci_hcd
> usb usb3: SerialNumber: 0000:00:13.1
> ohci_hcd 0000:00:13.0: GetStatus roothub.portstatus [1] = 0x00100103 PRSC PPS PES CCS
> usb 2-2: skipped 1 descriptor after interface
> usb 2-2: default language 0x0409
> usb 2-2: uevent
> usb 2-2: usb_probe_device
> usb 2-2: configuration #1 chosen from 1 choice
> usb 2-2: adding 2-2:1.0 (config #1, interface 0)
> usb 2-2:1.0: uevent
> usb 2-2:1.0: uevent
> usb 2-2: adding 2-2:1.1 (config #1, interface 1)
> usb 2-2:1.1: uevent
> usb 2-2:1.1: uevent
> usb 2-2: adding 2-2:1.2 (config #1, interface 2)
> usb 2-2:1.2: uevent
> usb 2-2:1.2: uevent
> usb 2-2: adding 2-2:1.3 (config #1, interface 3)
> usb 2-2:1.3: uevent
> usb 2-2:1.3: uevent
> /home/rafael/src/mm/linux-2.6.23-mm1/drivers/usb/core/inode.c: creating file '002'
> usb 2-2: new device found, idVendor=03f0, idProduct=171d
> usb 2-2: new device strings: Mfr=1, Product=2, SerialNumber=0
> usb 2-2: Product: HP Integrated Module
> usb 2-2: Manufacturer: Broadcom Corp
> floppy0: no floppy controllers found
> hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0044
> ehci_hcd 0000:00:13.2: GetStatus port 2 status 001803 POWER sig=j CSC CONNECT
> hub 1-0:1.0: port 2, status 0501, change 0001, 480 Mb/s
> Bluetooth: Core ver 2.11
> NET: Registered protocol family 31
> Bluetooth: HCI device and connection manager initialized
> Bluetooth: HCI socket layer initialized
> hub 1-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x501
> Bluetooth: HCI USB driver ver 2.9
> ehci_hcd 0000:00:13.2: port 2 full speed --> companion
> ehci_hcd 0000:00:13.2: GetStatus port 2 status 003801 POWER OWNER sig=j CONNECT
> hub 1-0:1.0: port 2 not reset yet, waiting 50ms
> ehci_hcd 0000:00:13.2: GetStatus port 2 status 003002 POWER OWNER sig=se0 CSC
> ehci_hcd 0000:00:13.2: GetStatus port 6 status 001403 POWER sig=k CSC CONNECT
> hub 1-0:1.0: port 6, status 0501, change 0001, 480 Mb/s
> hub 1-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x501
> ehci_hcd 0000:00:13.2: port 6 low speed --> companion
> ehci_hcd 0000:00:13.2: GetStatus port 6 status 003002 POWER OWNER sig=se0 CSC
> hub 2-0:1.0: state 7 ports 4 chg 0000 evt 0004
> hub 3-0:1.0: state 7 ports 4 chg 0000 evt 000a
> ohci_hcd 0000:00:13.1: GetStatus roothub.portstatus [0] = 0x00010101 CSC PPS CCS
> hci_usb 2-2:1.0: usb_probe_interface
> hci_usb 2-2:1.0: usb_probe_interface - got id
> hub 3-0:1.0: port 1, status 0101, change 0001, 12 Mb/s
> hci_usb 2-2:1.2: usb_probe_interface
> hci_usb 2-2:1.2: usb_probe_interface - got id
> hci_usb 2-2:1.3: usb_probe_interface
> hci_usb 2-2:1.3: usb_probe_interface - got id
> usbcore: registered new interface driver hci_usb
> hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x101
> ohci_hcd 0000:00:13.1: GetStatus roothub.portstatus [0] = 0x00100103 PRSC PPS PES CCS
> Bluetooth: L2CAP ver 2.8
> Bluetooth: L2CAP socket layer initialized
> usb 3-1: new full speed USB device using ohci_hcd and address 2
> Bluetooth: HIDP (Human Interface Emulation) ver 1.2
> ohci_hcd 0000:00:13.1: GetStatus roothub.portstatus [0] = 0x00100103 PRSC PPS PES CCS
> Bluetooth: RFCOMM socket layer initialized
> usb 3-1: ep0 maxpacket = 8
> Bluetooth: RFCOMM TTY layer initialized
> Bluetooth: RFCOMM ver 1.8
> usb 3-1: default language 0x0409
> usb 3-1: uevent
> usb 3-1: usb_probe_device
> usb 3-1: configuration #1 chosen from 1 choice
> usb 3-1: adding 3-1:1.0 (config #1, interface 0)
> usb 3-1:1.0: uevent
> usb 3-1:1.0: uevent
> /home/rafael/src/mm/linux-2.6.23-mm1/drivers/usb/core/inode.c: creating file '002'
> usb 3-1: new device found, idVendor=08ff, idProduct=2580
> usb 3-1: new device strings: Mfr=0, Product=1, SerialNumber=0
> usb 3-1: Product: Fingerprint Sensor
> ohci_hcd 0000:00:13.1: GetStatus roothub.portstatus [2] = 0x00010301 CSC LSDA PPS CCS
> hub 3-0:1.0: port 3, status 0301, change 0001, 1.5 Mb/s
> hub 3-0:1.0: debounce: port 3: total 100ms stable 100ms status 0x301
> ohci_hcd 0000:00:13.1: GetStatus roothub.portstatus [2] = 0x00100303 PRSC LSDA PPS PES CCS
> usb 3-3: new low speed USB device using ohci_hcd and address 3
> ohci_hcd 0000:00:13.1: GetStatus roothub.portstatus [2] = 0x00100303 PRSC LSDA PPS PES CCS
> usb 3-3: skipped 1 descriptor after interface
> usb 3-3: skipped 1 descriptor after interface
> usb 3-3: default language 0x0409
> usb 3-3: uevent
> usb 3-3: usb_probe_device
> usb 3-3: configuration #1 chosen from 1 choice
> usb 3-3: adding 3-3:1.0 (config #1, interface 0)
> usb 3-3:1.0: uevent
> usb 3-3:1.0: uevent
> usb 3-3: adding 3-3:1.1 (config #1, interface 1)
> usb 3-3:1.1: uevent
> usb 3-3:1.1: uevent
> /home/rafael/src/mm/linux-2.6.23-mm1/drivers/usb/core/inode.c: creating file '003'
> usb 3-3: new device found, idVendor=046d, idProduct=c521
> usb 3-3: new device strings: Mfr=1, Product=2, SerialNumber=0
> usb 3-3: Product: USB Receiver
> usb 3-3: Manufacturer: Logitech
> hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0040
> hub 3-0:1.0: state 7 ports 4 chg 0000 evt 0000
> usbcore: registered new interface driver hiddev
> usbhid 3-3:1.0: usb_probe_interface
> usbhid 3-3:1.0: usb_probe_interface - got id
> input: Logitech USB Receiver as /class/input/input2
> input: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:13.1-3
> usbhid 3-3:1.1: usb_probe_interface
> usbhid 3-3:1.1: usb_probe_interface - got id
> input: Logitech USB Receiver as /class/input/input3
> /home/rafael/src/mm/linux-2.6.23-mm1/drivers/usb/core/file.c: looking for a minor, starting at 96
> input,hiddev96: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:13.1-3
> usbcore: registered new interface driver usbhid
> /home/rafael/src/mm/linux-2.6.23-mm1/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
> Synaptics Touchpad, model: 1, fw: 6.2, id: 0x25a0b1, caps: 0xa04793/0x300000
> serio: Synaptics pass-through port at isa0060/serio4/input0
> input: SynPS/2 Synaptics TouchPad as /class/input/input4
> device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: [email protected]
> hub 1-0:1.0: hub_suspend
> usb usb1: bus auto-suspend
> ehci_hcd 0000:00:13.2: suspend root hub
> loop: module loaded
> kjournald starting. Commit interval 5 seconds
> EXT3 FS on sda2, internal journal
> EXT3-fs: mounted filesystem with ordered data mode.
> kjournald starting. Commit interval 5 seconds
> EXT3 FS on sda7, internal journal
> EXT3-fs: mounted filesystem with ordered data mode.
> kjournald starting. Commit interval 5 seconds
> EXT3 FS on sda8, internal journal
> EXT3-fs: mounted filesystem with ordered data mode.
> kjournald starting. Commit interval 5 seconds
> EXT3 FS on sda5, internal journal
> EXT3-fs: mounted filesystem with ordered data mode.
> kjournald starting. Commit interval 5 seconds
> EXT3 FS on sda6, internal journal
> EXT3-fs: mounted filesystem with ordered data mode.
> Floppy drive(s): fd0 is 1.44M
> floppy0: no floppy controllers found
> Adding 1052216k swap on /dev/sda1. Priority:-1 extents:1 across:1052216k
> NET: Registered protocol family 10
> lo: Disabled Privacy Extensions
> ip6_tables: (C) 2000-2006 Netfilter Core Team
> ip_tables: (C) 2000-2006 Netfilter Core Team
> nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
> ACPI: AC Adapter [C1BD] (on-line)
> ACPI: Battery Slot [C1BF] (battery present)
> ACPI: Battery Slot [C1BE] (battery absent)
> input: Power Button (FF) as /class/input/input5
> ACPI: Power Button (FF) [PWRF]
> input: Sleep Button (CM) as /class/input/input6
> ACPI: Sleep Button (CM) [C25A]
> input: Lid Switch as /class/input/input7
> ACPI: Lid Switch [C25B]
> ACPI: Transitioning device [C34F] to D3
> ACPI: Transitioning device [C34F] to D3
> ACPI: Fan [C34F] (off)
> ACPI: Transitioning device [C350] to D3
> ACPI: Transitioning device [C350] to D3
> ACPI: Fan [C350] (off)
> ACPI: Transitioning device [C351] to D3
> ACPI: Transitioning device [C351] to D3
> ACPI: Fan [C351] (off)
> ACPI: Transitioning device [C352] to D3
> ACPI: Transitioning device [C352] to D3
> ACPI: Fan [C352] (off)
> ACPI: Processor [C000] (supports 8 throttling states)
> ACPI: Processor [C001] (supports 8 throttling states)
> ACPI: Thermal Zone [TZ1] (62 C)
> ACPI: Thermal Zone [TZ2] (52 C)
> ACPI: Thermal Zone [TZ3] (32 C)
> powernow-k8: Found 1 AMD Turion(tm) 64 X2 Mobile Technology TL-60 processors (2 cpu cores) (version 2.00.00)
> powernow-k8: 0 : fid 0xc (2000 MHz), vid 0x13
> powernow-k8: 1 : fid 0xa (1800 MHz), vid 0x15
> powernow-k8: 2 : fid 0x8 (1600 MHz), vid 0x17
> powernow-k8: 3 : fid 0x0 (800 MHz), vid 0x1e
> powernow-k8: ph2 null fid transition 0xc
> mtrr: no more MTRRs available
> APIC error on CPU1: 00(40)
> APIC error on CPU0: 00(40)
> WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask()
>
> Call Trace:
> [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82
> [<ffffffff8021b2ea>] smp_call_function+0x23/0x25
> [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20
> [<ffffffff80437ace>] notifier_call_chain+0x33/0x65
> [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69
> [<ffffffff8024f07c>] pm_qos_add_requirement+0x24/0xd2
> [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11
> [<ffffffff8024ee6d>] update_target+0x71/0x76
> [<ffffffff8024f101>] pm_qos_add_requirement+0xa9/0xd2
> [<ffffffff88160bf9>] :snd_pcm:snd_pcm_hw_params+0x349/0x382
> [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc
> [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87
> [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f
> [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2
> [<ffffffff80270cbe>] find_lock_page+0x2a/0xa6
> [<ffffffff80272bce>] filemap_fault+0x1d3/0x35b
> [<ffffffff80270bab>] unlock_page+0x2d/0x31
> [<ffffffff8027d6ec>] __do_fault+0x38e/0x3c4
> [<ffffffff8027ef6a>] handle_mm_fault+0x1f6/0x6e5
> [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a
> [<ffffffff8024e56b>] up_read+0x9/0xb
> [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36
> [<ffffffff802a0896>] do_ioctl+0x2a/0x77
> [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e
> [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b
> [<ffffffff8020bfde>] system_call+0x7e/0x83
>
> hda-intel: Invalid position buffer, using LPIB read method instead.
> WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask()
>
> Call Trace:
> [<ffffffff88160769>] :snd_pcm:snd_pcm_hw_refine+0x292/0x3d9
> [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82
> [<ffffffff8021b2ea>] smp_call_function+0x23/0x25
> [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20
> [<ffffffff80437ace>] notifier_call_chain+0x33/0x65
> [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69
> [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11
> [<ffffffff8024ee6d>] update_target+0x71/0x76
> [<ffffffff8024eef4>] pm_qos_remove_requirement+0x82/0xc0
> [<ffffffff88160bbe>] :snd_pcm:snd_pcm_hw_params+0x30e/0x382
> [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc
> [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87
> [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f
> [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2
> [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199
> [<ffffffff8024b514>] remove_wait_queue+0x40/0x45
> [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2
> [<ffffffff8022f18e>] default_wake_function+0x0/0xf
> [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231
> [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39
> [<ffffffff80282e91>] vma_link+0xdd/0x10b
> [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a
> [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36
> [<ffffffff802a0896>] do_ioctl+0x2a/0x77
> [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e
> [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b
> [<ffffffff8020bfde>] system_call+0x7e/0x83
>
> WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask()
>
> Call Trace:
> [<ffffffff8021b2b2>] smp_call_function_mask+0x6d/0x82
> [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82
> [<ffffffff8021b2ea>] smp_call_function+0x23/0x25
> [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20
> [<ffffffff80437ace>] notifier_call_chain+0x33/0x65
> [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69
> [<ffffffff8024f07c>] pm_qos_add_requirement+0x24/0xd2
> [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11
> [<ffffffff8024ee6d>] update_target+0x71/0x76
> [<ffffffff8024f101>] pm_qos_add_requirement+0xa9/0xd2
> [<ffffffff88160bf9>] :snd_pcm:snd_pcm_hw_params+0x349/0x382
> [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc
> [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87
> [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f
> [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2
> [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199
> [<ffffffff8024b514>] remove_wait_queue+0x40/0x45
> [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2
> [<ffffffff8022f18e>] default_wake_function+0x0/0xf
> [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231
> [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39
> [<ffffffff80282e91>] vma_link+0xdd/0x10b
> [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a
> [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36
> [<ffffffff802a0896>] do_ioctl+0x2a/0x77
> [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e
> [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b
> [<ffffffff8020bfde>] system_call+0x7e/0x83
>
> WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask()
>
> Call Trace:
> [<ffffffff88160769>] :snd_pcm:snd_pcm_hw_refine+0x292/0x3d9
> [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82
> [<ffffffff8021b2ea>] smp_call_function+0x23/0x25
> [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20
> [<ffffffff80437ace>] notifier_call_chain+0x33/0x65
> [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69
> [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11
> [<ffffffff8024ee6d>] update_target+0x71/0x76
> [<ffffffff8024eef4>] pm_qos_remove_requirement+0x82/0xc0
> [<ffffffff88160bbe>] :snd_pcm:snd_pcm_hw_params+0x30e/0x382
> [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc
> [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87
> [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f
> [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2
> [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199
> [<ffffffff8024b514>] remove_wait_queue+0x40/0x45
> [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2
> [<ffffffff8022f18e>] default_wake_function+0x0/0xf
> [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231
> [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39
> [<ffffffff80282e91>] vma_link+0xdd/0x10b
> [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a
> [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36
> [<ffffffff802a0896>] do_ioctl+0x2a/0x77
> [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e
> [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b
> [<ffffffff8020bfde>] system_call+0x7e/0x83
>
> WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask()
>
> Call Trace:
> [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82
> [<ffffffff8021b2ea>] smp_call_function+0x23/0x25
> [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20
> [<ffffffff80437ace>] notifier_call_chain+0x33/0x65
> [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69
> [<ffffffff8024f07c>] pm_qos_add_requirement+0x24/0xd2
> [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11
> [<ffffffff8024ee6d>] update_target+0x71/0x76
> [<ffffffff8024f101>] pm_qos_add_requirement+0xa9/0xd2
> [<ffffffff88160bf9>] :snd_pcm:snd_pcm_hw_params+0x349/0x382
> [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc
> [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87
> [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f
> [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2
> [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199
> [<ffffffff8024b514>] remove_wait_queue+0x40/0x45
> [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2
> [<ffffffff8022f18e>] default_wake_function+0x0/0xf
> [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231
> [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39
> [<ffffffff80282e91>] vma_link+0xdd/0x10b
> [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a
> [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36
> [<ffffffff802a0896>] do_ioctl+0x2a/0x77
> [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e
> [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b
> [<ffffffff8020bfde>] system_call+0x7e/0x83
>
> ACPI: PCI interrupt for device 0000:30:00.0 disabled
> bcm43xx driver
> ACPI: PCI Interrupt 0000:30:00.0[A] -> GSI 18 (level, low) -> IRQ 18
> PCI: Setting latency timer of device 0000:30:00.0 to 64
> bcm43xx: Chip ID 0x4311, rev 0x1
> bcm43xx: Number of cores: 4
> bcm43xx: Core 0: ID 0x800, rev 0x11, vendor 0x4243
> bcm43xx: Core 1: ID 0x812, rev 0xa, vendor 0x4243
> bcm43xx: Core 2: ID 0x817, rev 0x3, vendor 0x4243
> bcm43xx: Core 3: ID 0x820, rev 0x1, vendor 0x4243
> bcm43xx: PHY connected
> bcm43xx: Detected PHY: Analog: 4, Type 2, Revision 8
> bcm43xx: Detected Radio: ID: 2205017f (Manuf: 17f Ver: 2050 Rev: 2)
> bcm43xx: Radio initialized
> bcm43xx: Radio initialized
> bcm43xx: PHY connected
> bcm43xx: Microcode rev 0x127, pl 0xe (2005-04-18 02:36:27)
> bcm43xx: Radio turned on
> bcm43xx: Radio enabled by hardware
> bcm43xx: Chip initialized
> bcm43xx: 32-bit DMA initialized
> bcm43xx: Keys cleared
> bcm43xx: Selected 802.11 core (phytype 2)
> ADDRCONF(NETDEV_UP): eth1: link is not ready
> SoftMAC: Scanning finished: scanned 13 channels starting with channel 1
> SoftMAC: Associate: Scanning for networks first.
> SoftMAC: Scanning finished: scanned 13 channels starting with channel 1
> SoftMAC: Queueing Authentication Request to 00:17:9a:f3:b5:75
> SoftMAC: Cannot associate without being authenticated, requested authentication
> SoftMAC: Sent Authentication Request to 00:17:9a:f3:b5:75.
> SoftMAC: Open Authentication completed with 00:17:9a:f3:b5:75
> SoftMAC: sent association request!
> SoftMAC: associated!
> ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
> SFW2-OUT-ERROR IN= OUT=eth1 SRC=0000:0000:0000:0000:0000:0000:0000:0000 DST=ff02:0000:0000:0000:0000:0000:0000:0016 LEN=76 TC=0 HOPLIMIT=1 FLOWLBL=0 OPT ( ) PROTO=ICMPv6 TYPE=143 CODE=0
> SoftMAC: Getting essid from req_essid
> SFW2-OUT-ERROR IN= OUT=eth1 SRC=0000:0000:0000:0000:0000:0000:0000:0000 DST=ff02:0000:0000:0000:0000:0001:ffbe:9531 LEN=64 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=ICMPv6 TYPE=135 CODE=0
> NET: Registered protocol family 17
> SoftMAC: Getting essid from req_essid
> SFW2-OUT-ERROR IN= OUT=eth1 SRC=fe80:0000:0000:0000:0214:a5ff:febe:9531 DST=ff02:0000:0000:0000:0000:0000:0000:0002 LEN=56 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=ICMPv6 TYPE=133 CODE=0
> SoftMAC: Getting essid from req_essid
> SFW2-INext-DROP-DEFLT IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:17:9a:f3:b5:75:08:00 SRC=62.121.83.254 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0xC0 TTL=1 ID=7883 PROTO=2
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SFW2-OUT-ERROR IN= OUT=eth1 SRC=fe80:0000:0000:0000:0214:a5ff:febe:9531 DST=ff02:0000:0000:0000:0000:0000:0000:0002 LEN=56 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=ICMPv6 TYPE=133 CODE=0
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SFW2-OUT-ERROR IN= OUT=eth1 SRC=fe80:0000:0000:0000:0214:a5ff:febe:9531 DST=ff02:0000:0000:0000:0000:0000:0000:0002 LEN=56 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=ICMPv6 TYPE=133 CODE=0
> SFW2-OUT-ERROR IN= OUT=eth1 SRC=fe80:0000:0000:0000:0214:a5ff:febe:9531 DST=ff02:0000:0000:0000:0000:0000:0000:0016 LEN=76 TC=0 HOPLIMIT=1 FLOWLBL=0 OPT ( ) PROTO=ICMPv6 TYPE=143 CODE=0
> SoftMAC: Getting essid from req_essid
> eth1: no IPv6 routers present
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> bcm43xx: Radio initialized
> bcm43xx: DMA-32 0x0200 (RX) max used slots: 1/64
> bcm43xx: DMA-32 0x02A0 (TX) max used slots: 0/512
> bcm43xx: DMA-32 0x0280 (TX) max used slots: 0/512
> bcm43xx: DMA-32 0x0260 (TX) max used slots: 0/512
> bcm43xx: DMA-32 0x0240 (TX) max used slots: 0/512
> bcm43xx: DMA-32 0x0220 (TX) max used slots: 2/512
> bcm43xx: DMA-32 0x0200 (TX) max used slots: 0/512
> ACPI: PCI interrupt for device 0000:30:00.0 disabled
> Syncing filesystems ... done.
> PM: Preparing system for mem sleep
> Freezing user space processes ... (elapsed 0.00 seconds) done.
> Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
> PM: Entering mem sleep
> Suspending device vcsa10
> Suspending device vcs10
> Suspending device vcsa4
> Suspending device vcs4
> Suspending device vcsa2
> Suspending device vcs2
> Suspending device vcsa6
> Suspending device vcs6
> Suspending device vcsa5
> Suspending device vcs5
> Suspending device vcsa3
> Suspending device vcs3
> Suspending device vcsa7
> Suspending device vcs7
> Suspending device audio
> Suspending device dsp
> Suspending device mixer
> Suspending device event7
> Suspending device input7
> Suspending device event6
> Suspending device input6
> Suspending device event5
> Suspending device input5
> Suspending device seq
> Suspending device C1BE
> Suspending device C1BF
> Suspending device C1BD
> Suspending device device-mapper
> Suspending device serio5
> Suspending device event4
> Suspending device mouse1
> Suspending device input4
> Suspending device hiddev0
> Suspending device event3
> Suspending device input3
> Suspending device event2
> Suspending device mouse0
> Suspending device input2
> Suspending device usbdev3.3
> Suspending device usbdev3.3_ep82
> Suspending device 3-3:1.1
> Suspending device usbdev3.3_ep81
> Suspending device 3-3:1.0
> Suspending device usbdev3.3_ep00
> Suspending device 3-3
> usb 3-3: usb suspend
> Suspending device usbdev3.2
> Suspending device usbdev3.2_ep02
> Suspending device usbdev3.2_ep81
> Suspending device 3-1:1.0
> Suspending device usbdev3.2_ep00
> Suspending device 3-1
> usb 3-1: usb suspend
> Suspending device hci0
> Suspending device usbdev2.2_ep03
> Suspending device usbdev2.2_ep83
> Suspending device bluetooth
> Suspending device usbdev2.2
> Suspending device 2-2:1.3
> Suspending device usbdev2.2_ep04
> Suspending device usbdev2.2_ep84
> Suspending device 2-2:1.2
> Suspending device 2-2:1.1
> Suspending device usbdev2.2_ep02
> Suspending device usbdev2.2_ep82
> Suspending device usbdev2.2_ep81
> Suspending device 2-2:1.0
> Suspending device usbdev2.2_ep00
> Suspending device 2-2
> usb 2-2: usb suspend
> Suspending device usbdev3.1
> Suspending device usbdev3.1_ep81
> Suspending device 00023f9929613f0c
> Suspending device 00023f9929613f0c
> Suspending device 3-0:1.0
> Suspending device usbdev3.1_ep00
> Suspending device usb3
> hub 3-0:1.0: hub_suspend
> usb usb3: bus suspend
> ohci_hcd 0000:00:13.1: suspend root hub
> Suspending device pcmcia_socket0
> Suspending device usbdev2.1
> Suspending device usbdev2.1_ep81
> Suspending device 2-0:1.0
> Suspending device usbdev2.1_ep00
> Suspending device usb2
> hub 2-0:1.0: hub_suspend
> usb usb2: bus suspend
> ohci_hcd 0000:00:13.0: suspend root hub
> Suspending device hwmon0
> Suspending device usbdev1.1
> Suspending device usbdev1.1_ep81
> Suspending device 1-0:1.0
> Suspending device usbdev1.1_ep00
> Suspending device usb1
> Suspending device fw-host0
> Suspending device fw-host0
> Suspending device mmc0
> Suspending device i2c-0
> Suspending device eth0
> Suspending device controlC0
> Suspending device hwC0D0
> Suspending device hwC0D1
> Suspending device pcmC0D0c
> Suspending device pcmC0D0p
> Suspending device timer
> Suspending device vcsa1
> Suspending device vcs1
> Suspending device 0.0
> Suspending device ide0
> Suspending device network_throughput
> Suspending device network_latency
> Suspending device cpu_dma_latency
> Suspending device event1
> Suspending device event0
> Suspending device input1
> Suspending device input0
> Suspending device psaux
> Suspending device mice
> Suspending device serio4
> Suspending device serio3
> Suspending device serio2
> Suspending device serio1
> Suspending device serio0
> Suspending device i8042
> Suspending device 0:0:0:0
> sd 0:0:0:0: [sda] Synchronizing SCSI cache
> sd 0:0:0:0: [sda] Stopping disk
> Suspending device target0:0:0
> Suspending device host1
> Suspending device host0
> Suspending device ttyS3
> Suspending device ttyS2
> Suspending device ttyS1
> Suspending device ttyS0
> Suspending device serial8250
> Suspending device nvram
> Suspending device hpet
> Suspending device rtc
> Suspending device ttysf
> Suspending device ttyse
> Suspending device ttysd
> Suspending device ttysc
> Suspending device ttysb
> Suspending device ttysa
> Suspending device ttys9
> Suspending device ttys8
> Suspending device ttys7
> Suspending device ttys6
> Suspending device ttys5
> Suspending device ttys4
> Suspending device ttys3
> Suspending device ttys2
> Suspending device ttys1
> Suspending device ttys0
> Suspending device ttyrf
> Suspending device ttyre
> Suspending device ttyrd
> Suspending device ttyrc
> Suspending device ttyrb
> Suspending device ttyra
> Suspending device ttyr9
> Suspending device ttyr8
> Suspending device ttyr7
> Suspending device ttyr6
> Suspending device ttyr5
> Suspending device ttyr4
> Suspending device ttyr3
> Suspending device ttyr2
> Suspending device ttyr1
> Suspending device ttyr0
> Suspending device ttyqf
> Suspending device ttyqe
> Suspending device ttyqd
> Suspending device ttyqc
> Suspending device ttyqb
> Suspending device ttyqa
> Suspending device ttyq9
> Suspending device ttyq8
> Suspending device ttyq7
> Suspending device ttyq6
> Suspending device ttyq5
> Suspending device ttyq4
> Suspending device ttyq3
> Suspending device ttyq2
> Suspending device ttyq1
> Suspending device ttyq0
> Suspending device ttypf
> Suspending device ttype
> Suspending device ttypd
> Suspending device ttypc
> Suspending device ttypb
> Suspending device ttypa
> Suspending device ttyp9
> Suspending device ttyp8
> Suspending device ttyp7
> Suspending device ttyp6
> Suspending device ttyp5
> Suspending device ttyp4
> Suspending device ttyp3
> Suspending device ttyp2
> Suspending device ttyp1
> Suspending device ttyp0
> Suspending device ptysf
> Suspending device ptyse
> Suspending device ptysd
> Suspending device ptysc
> Suspending device ptysb
> Suspending device ptysa
> Suspending device ptys9
> Suspending device ptys8
> Suspending device ptys7
> Suspending device ptys6
> Suspending device ptys5
> Suspending device ptys4
> Suspending device ptys3
> Suspending device ptys2
> Suspending device ptys1
> Suspending device ptys0
> Suspending device ptyrf
> Suspending device ptyre
> Suspending device ptyrd
> Suspending device ptyrc
> Suspending device ptyrb
> Suspending device ptyra
> Suspending device ptyr9
> Suspending device ptyr8
> Suspending device ptyr7
> Suspending device ptyr6
> Suspending device ptyr5
> Suspending device ptyr4
> Suspending device ptyr3
> Suspending device ptyr2
> Suspending device ptyr1
> Suspending device ptyr0
> Suspending device ptyqf
> Suspending device ptyqe
> Suspending device ptyqd
> Suspending device ptyqc
> Suspending device ptyqb
> Suspending device ptyqa
> Suspending device ptyq9
> Suspending device ptyq8
> Suspending device ptyq7
> Suspending device ptyq6
> Suspending device ptyq5
> Suspending device ptyq4
> Suspending device ptyq3
> Suspending device ptyq2
> Suspending device ptyq1
> Suspending device ptyq0
> Suspending device ptypf
> Suspending device ptype
> Suspending device ptypd
> Suspending device ptypc
> Suspending device ptypb
> Suspending device ptypa
> Suspending device ptyp9
> Suspending device ptyp8
> Suspending device ptyp7
> Suspending device ptyp6
> Suspending device ptyp5
> Suspending device ptyp4
> Suspending device ptyp3
> Suspending device ptyp2
> Suspending device ptyp1
> Suspending device ptyp0
> Suspending device tty63
> Suspending device tty62
> Suspending device tty61
> Suspending device tty60
> Suspending device tty59
> Suspending device tty58
> Suspending device tty57
> Suspending device tty56
> Suspending device tty55
> Suspending device tty54
> Suspending device tty53
> Suspending device tty52
> Suspending device tty51
> Suspending device tty50
> Suspending device tty49
> Suspending device tty48
> Suspending device tty47
> Suspending device tty46
> Suspending device tty45
> Suspending device tty44
> Suspending device tty43
> Suspending device tty42
> Suspending device tty41
> Suspending device tty40
> Suspending device tty39
> Suspending device tty38
> Suspending device tty37
> Suspending device tty36
> Suspending device tty35
> Suspending device tty34
> Suspending device tty33
> Suspending device tty32
> Suspending device tty31
> Suspending device tty30
> Suspending device tty29
> Suspending device tty28
> Suspending device tty27
> Suspending device tty26
> Suspending device tty25
> Suspending device tty24
> Suspending device tty23
> Suspending device tty22
> Suspending device tty21
> Suspending device tty20
> Suspending device tty19
> Suspending device tty18
> Suspending device tty17
> Suspending device tty16
> Suspending device tty15
> Suspending device tty14
> Suspending device tty13
> Suspending device tty12
> Suspending device tty11
> Suspending device tty10
> Suspending device tty9
> Suspending device tty8
> Suspending device tty7
> Suspending device tty6
> Suspending device tty5
> Suspending device tty4
> Suspending device tty3
> Suspending device tty2
> Suspending device tty1
> Suspending device vcsa
> Suspending device vcs
> Suspending device tty0
> Suspending device ptmx
> Suspending device console
> Suspending device tty
> Suspending device vtcon1
> Suspending device fb0
> Suspending device vesafb.0
> Suspending device fbcon
> Suspending device 0000:00:06.0:pcie03
> Suspending device 0000:00:06.0:pcie01
> Suspending device 0000:00:06.0:pcie00
> Suspending device 0000:00:05.0:pcie03
> Suspending device 0000:00:05.0:pcie01
> Suspending device 0000:00:05.0:pcie00
> Suspending device 0000:00:04.0:pcie03
> Suspending device 0000:00:04.0:pcie01
> Suspending device 0000:00:04.0:pcie00
> Suspending device snapshot
> Suspending device pcspkr
> Suspending device mcelog
> Suspending device lo
> Suspending device kmsg
> Suspending device urandom
> Suspending device random
> Suspending device full
> Suspending device zero
> Suspending device port
> Suspending device null
> Suspending device kmem
> Suspending device mem
> Suspending device 00:0c
> ACPI handle has no context!
> Suspending device 00:0b
> Suspending device 00:0a
> Suspending device 00:09
> Suspending device 00:08
> Suspending device 00:07
> Suspending device 00:06
> Suspending device 00:05
> Suspending device 00:04
> Suspending device 00:03
> Suspending device 00:02
> Suspending device 00:01
> Suspending device 00:00
> Suspending device pnp0
> Suspending device 0000:02
> Suspending device 0000:03
> Suspending device 0000:02:04.3
> ACPI handle has no context!
> ACPI: PCI interrupt for device 0000:02:04.3 disabled
> ACPI handle has no context!
> Suspending device 0000:02:04.2
> ACPI handle has no context!
> ACPI: PCI interrupt for device 0000:02:04.2 disabled
> ACPI handle has no context!
> Suspending device 0000:02:04.1
> ACPI handle has no context!
> Suspending device 0000:02:04.0
> Suspending device 0000:02:01.0
> Suspending device 0000:30
> Suspending device 0000:30:00.0
> Suspending device 0000:20
> Suspending device 0000:10
> Suspending device 0000:01
> Suspending device 0000:01:05.0
> Suspending device 0000:00:18.3
> Suspending device 0000:00:18.2
> Suspending device 0000:00:18.1
> Suspending device 0000:00:18.0
> Suspending device 0000:00:14.4
> Suspending device 0000:00:14.3
> Suspending device 0000:00:14.2
> ACPI: PCI interrupt for device 0000:00:14.2 disabled
> Suspending device 0000:00:14.1
> Suspending device 0000:00:14.0
> Suspending device 0000:00:13.2
> ACPI: PCI interrupt for device 0000:00:13.2 disabled
> ehci_hcd 0000:00:13.2: --> PCI D3
> Suspending device 0000:00:13.1
> ACPI: PCI interrupt for device 0000:00:13.1 disabled
> ohci_hcd 0000:00:13.1: --> PCI D0/legacy
> Suspending device 0000:00:13.0
> ACPI: PCI interrupt for device 0000:00:13.0 disabled
> ohci_hcd 0000:00:13.0: --> PCI D0/legacy
> Suspending device 0000:00:12.0
> ACPI: PCI interrupt for device 0000:00:12.0 disabled
> Suspending device 0000:00:06.0
> Suspending device 0000:00:05.0
> Suspending device 0000:00:04.0
> Suspending device 0000:00:01.0
> Suspending device 0000:00:00.0
> Suspending device 0000:00
> Suspending device pci0000:00
> Suspending device LNXTHERM:03
> Suspending device LNXTHERM:02
> Suspending device LNXTHERM:01
> Suspending device PNP0C0B:03
> Suspending device PNP0C0B:02
> ACPI: Transitioning device [C351] to D0
> ACPI: Transitioning device [C351] to D0
> Suspending device PNP0C0B:01
> ACPI: Transitioning device [C350] to D0
> ACPI: Transitioning device [C350] to D0
> Suspending device PNP0C0B:00
> ACPI: Transitioning device [C34F] to D0
> ACPI: Transitioning device [C34F] to D0
> Suspending device LNXPOWER:06
> Suspending device LNXPOWER:05
> Suspending device LNXPOWER:04
> Suspending device LNXPOWER:03
> Suspending device LNXTHERM:00
> Suspending device PNP0C02:02
> Suspending device PNP0C14:00
> Suspending device PNP0C0D:00
> Suspending device PNP0C0E:00
> Suspending device ACPI0003:00
> Suspending device PNP0C0A:01
> Suspending device PNP0C0A:00
> Suspending device HPQ0006:00
> Suspending device PNP0C02:01
> Suspending device device:49
> Suspending device device:48
> Suspending device device:47
> Suspending device device:46
> Suspending device device:45
> Suspending device device:44
> Suspending device device:43
> Suspending device device:42
> Suspending device device:41
> Suspending device device:40
> Suspending device device:3f
> Suspending device device:3e
> Suspending device device:3d
> Suspending device device:3c
> Suspending device device:3b
> Suspending device device:3a
> Suspending device device:39
> Suspending device device:38
> Suspending device device:37
> Suspending device device:36
> Suspending device device:35
> Suspending device device:34
> Suspending device device:33
> Suspending device PNP0C0F:07
> Suspending device PNP0C0F:06
> Suspending device PNP0C0F:05
> Suspending device PNP0C0F:04
> Suspending device PNP0C0F:03
> Suspending device PNP0C0F:02
> Suspending device PNP0C0F:01
> Suspending device PNP0C0F:00
> Suspending device device:32
> Suspending device device:31
> Suspending device device:30
> Suspending device device:2f
> Suspending device device:2e
> Suspending device device:2d
> Suspending device device:2c
> Suspending device device:2b
> Suspending device device:2a
> Suspending device device:29
> Suspending device device:28
> Suspending device device:27
> Suspending device device:26
> Suspending device device:25
> Suspending device device:24
> Suspending device device:23
> Suspending device device:22
> Suspending device device:21
> Suspending device device:20
> Suspending device device:1f
> Suspending device device:1e
> Suspending device device:1d
> Suspending device device:1c
> Suspending device device:1b
> Suspending device device:1a
> Suspending device device:19
> Suspending device device:18
> Suspending device device:17
> Suspending device device:16
> Suspending device device:15
> Suspending device device:14
> Suspending device device:13
> Suspending device device:12
> Suspending device device:11
> Suspending device device:10
> Suspending device PNP0C02:00
> Suspending device PNP0000:00
> Suspending device LNXPOWER:02
> Suspending device SYN0118:00
> Suspending device PNP0303:00
> Suspending device PNP0B00:00
> Suspending device PNP0800:00
> Suspending device PNP0200:00
> Suspending device PNP0100:00
> Suspending device PNP0C04:00
> Suspending device IFX0102:00
> Suspending device LNXPOWER:01
> Suspending device PNP0401:00
> Suspending device PNP0A06:00
> Suspending device PNP0C09:00
> Suspending device device:0f
> Suspending device device:0e
> Suspending device LNXPOWER:00
> Suspending device device:0d
> Suspending device device:0c
> Suspending device device:0b
> Suspending device device:0a
> Suspending device device:09
> Suspending device device:08
> Suspending device device:07
> Suspending device device:06
> Suspending device device:05
> Suspending device device:04
> Suspending device device:03
> Suspending device device:02
> Suspending device LNXVIDEO:00
> Suspending device device:01
> Suspending device PNP0A03:00
> Suspending device PNP0C01:00
> Suspending device device:00
> Suspending device ACPI0007:01
> Suspending device ACPI0007:00
> Suspending device LNXPWRBN:00
> Suspending device LNXSYSTM:00
> Suspending device id
> Suspending device vtcon0
> Suspending device platform
> Disabling non-boot CPUs ...
> CPU0 attaching NULL sched-domain.
> CPU1 attaching NULL sched-domain.
> Cannot set affinity for irq 0
> CPU 1 is now offline
> SMP alternatives: switching to UP code
> CPU0 attaching NULL sched-domain.
> CPU1 is down
> Extended CMOS year: 2000
> hwsleep-0317 [00] enter_sleep_state : Entering sleep state [S3]
> Back to C!
> WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:427 smp_call_function_single()
>
> Call Trace:
> [<ffffffff8022ecc6>] task_rq_lock+0x3d/0x6f
> [<ffffffff8021b51b>] smp_call_function_single+0x52/0xa0
> [<ffffffff80232f59>] set_cpus_allowed+0xbf/0xcc
> [<ffffffff80214c61>] sc_freq_event+0x71/0x75
> [<ffffffff80437ace>] notifier_call_chain+0x33/0x65
> [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69
> [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11
> [<ffffffff803c1b1d>] cpufreq_resume+0x131/0x157
> [<ffffffff80383128>] __sysdev_resume+0x34/0x4a
> [<ffffffff8038366e>] sysdev_resume+0x1f/0x61
> [<ffffffff80388050>] device_power_up+0x9/0x10
> [<ffffffff8025bba4>] suspend_devices_and_enter+0xbf/0xf7
> [<ffffffff8025bd3f>] enter_state+0x163/0x1e5
> [<ffffffff8025be65>] state_store+0xa4/0xc2
> [<ffffffff802d98a1>] subsys_attr_store+0x31/0x33
> [<ffffffff802d9ccd>] sysfs_write_file+0xe0/0x11c
> [<ffffffff80294d07>] vfs_write+0xc7/0x150
> [<ffffffff80295288>] sys_write+0x47/0x70
> [<ffffffff8020bfde>] system_call+0x7e/0x83
>
> Extended CMOS year: 2000
> Enabling non-boot CPUs ...
> CPU0 attaching NULL sched-domain.
> SMP alternatives: switching to SMP code
> Booting processor 1/2 APIC 0x1
> Initializing CPU#1
> Calibrating delay using timer specific routine.. 3990.28 BogoMIPS (lpj=7980574)
> CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
> CPU: L2 Cache: 512K (64 bytes/line)
> CPU: Physical Processor ID: 0
> CPU: Processor Core ID: 1
> AMD Turion(tm) 64 X2 Mobile Technology TL-60 stepping 02
> Machine check events logged
> CPU0 attaching sched-domain:
> domain 0: span 00000000,00000000,00000000,00000003
> groups: 00000000,00000000,00000000,00000001 00000000,00000000,00000000,00000002
> CPU1 attaching sched-domain:
> domain 0: span 00000000,00000000,00000000,00000003
> groups: 00000000,00000000,00000000,00000002 00000000,00000000,00000000,00000001
> CPU1 is up
> Clockevents: could not switch to one-shot mode: lapic is not functional.
> Could not switch to high resolution mode on CPU 1
> ACPI: Transitioning device [C34F] to D3
> ACPI: Transitioning device [C34F] to D3
> ACPI: Transitioning device [C350] to D3
> ACPI: Transitioning device [C350] to D3
> ACPI: Transitioning device [C351] to D3
> ACPI: Transitioning device [C351] to D3
> PM: Writing back config space on device 0000:00:01.0 at offset 7 (was 22206161, writing 2206161)
> PM: Writing back config space on device 0000:00:04.0 at offset 9 (was 10001, writing 1fff1)
> PM: Writing back config space on device 0000:00:04.0 at offset 8 (was 0, writing d3f0d000)
> PM: Writing back config space on device 0000:00:04.0 at offset 7 (was 101, writing 5141)
> PM: Writing back config space on device 0000:00:04.0 at offset 3 (was 10000, writing 10010)
> PM: Writing back config space on device 0000:00:04.0 at offset 1 (was 100000, writing 100007)
> PCI: Setting latency timer of device 0000:00:04.0 to 64
> PM: Writing back config space on device 0000:00:05.0 at offset 9 (was 10001, writing 1fff1)
> PM: Writing back config space on device 0000:00:05.0 at offset 8 (was 0, writing cff0cc00)
> PM: Writing back config space on device 0000:00:05.0 at offset 7 (was 101, writing 3121)
> PM: Writing back config space on device 0000:00:05.0 at offset 3 (was 10000, writing 10010)
> PM: Writing back config space on device 0000:00:05.0 at offset 1 (was 100000, writing 100007)
> PCI: Setting latency timer of device 0000:00:05.0 to 64
> PM: Writing back config space on device 0000:00:06.0 at offset 9 (was 10001, writing 1fff1)
> PM: Writing back config space on device 0000:00:06.0 at offset 8 (was 0, writing c800c800)
> PM: Writing back config space on device 0000:00:06.0 at offset 7 (was 101, writing 1f1)
> PM: Writing back config space on device 0000:00:06.0 at offset 3 (was 10000, writing 10010)
> PM: Writing back config space on device 0000:00:06.0 at offset 1 (was 100000, writing 100007)
> PCI: Setting latency timer of device 0000:00:06.0 to 64
> PM: Writing back config space on device 0000:00:12.0 at offset f (was 100, writing 10a)
> PM: Writing back config space on device 0000:00:12.0 at offset 3 (was 0, writing 4010)
> ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 16 (level, low) -> IRQ 16
> ohci_hcd 0000:00:13.0: PCI legacy resume
> PCI: Enabling device 0000:00:13.0 (0000 -> 0002)
> ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 19 (level, low) -> IRQ 19
> PCI: Setting latency timer of device 0000:00:13.0 to 64
> PM: Writing back config space on device 0000:00:13.0 at offset f (was 100, writing 10b)
> PM: Writing back config space on device 0000:00:13.0 at offset 4 (was 0, writing d4401000)
> PM: Writing back config space on device 0000:00:13.0 at offset 3 (was 804000, writing 804010)
> PM: Writing back config space on device 0000:00:13.0 at offset 1 (was 2b00006, writing 2b00007)
> ohci_hcd 0000:00:13.1: PCI legacy resume
> PCI: Enabling device 0000:00:13.1 (0000 -> 0002)
> ACPI: PCI Interrupt 0000:00:13.1[A] -> GSI 19 (level, low) -> IRQ 19
> PCI: Setting latency timer of device 0000:00:13.1 to 64
> PM: Writing back config space on device 0000:00:13.1 at offset f (was 100, writing 10b)
> PM: Writing back config space on device 0000:00:13.1 at offset 4 (was 0, writing d4402000)
> PM: Writing back config space on device 0000:00:13.1 at offset 1 (was 2b00006, writing 2b00007)
> ehci_hcd 0000:00:13.2: PCI D0, from previous PCI D3
> ACPI: PCI Interrupt 0000:00:13.2[A] -> GSI 19 (level, low) -> IRQ 19
> PCI: Setting latency timer of device 0000:00:13.2 to 64
> PM: Writing back config space on device 0000:00:13.2 at offset f (was 100, writing 10b)
> ehci_hcd 0000:00:13.2: lost power, restarting
> usb usb1: root hub lost power or was reset
> ehci_hcd 0000:00:13.2: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT
> ehci_hcd 0000:00:13.2: MWI active
> PM: Writing back config space on device 0000:00:14.1 at offset f (was 100, writing 10a)
> PM: Writing back config space on device 0000:00:14.1 at offset 8 (was 1, writing 7041)
> PM: Writing back config space on device 0000:00:14.1 at offset 3 (was 0, writing 4010)
> PM: Writing back config space on device 0000:00:14.1 at offset 1 (was 2300000, writing 2300005)
> ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 16
> PM: Writing back config space on device 0000:00:14.2 at offset f (was 10a, writing a)
> PM: Writing back config space on device 0000:00:14.2 at offset 1 (was 4100000, writing 4100002)
> ACPI: PCI Interrupt 0000:00:14.2[A] -> GSI 16 (level, low) -> IRQ 16
> PM: Writing back config space on device 0000:00:14.4 at offset 3 (was 816000, writing 814000)
> PM: Writing back config space on device 0000:30:00.0 at offset f (was 100, writing 10a)
> PM: Writing back config space on device 0000:30:00.0 at offset 4 (was 0, writing c8000000)
> PM: Writing back config space on device 0000:30:00.0 at offset 3 (was 0, writing 10)
> PM: Writing back config space on device 0000:30:00.0 at offset 1 (was 100000, writing 100003)
> PM: Writing back config space on device 0000:02:01.0 at offset 3 (was 0, writing 4010)
> PM: Writing back config space on device 0000:02:01.0 at offset 1 (was 2b00000, writing 2b00006)
> PM: Writing back config space on device 0000:02:04.0 at offset f (was 34001ff, writing 5c0010a)
> PM: Writing back config space on device 0000:02:04.0 at offset e (was 0, writing 14fc)
> PM: Writing back config space on device 0000:02:04.0 at offset d (was 0, writing 1400)
> PM: Writing back config space on device 0000:02:04.0 at offset c (was 0, writing 10fc)
> PM: Writing back config space on device 0000:02:04.0 at offset b (was 0, writing 1000)
> PM: Writing back config space on device 0000:02:04.0 at offset a (was 0, writing 93fff000)
> PM: Writing back config space on device 0000:02:04.0 at offset 9 (was 0, writing 90000000)
> PM: Writing back config space on device 0000:02:04.0 at offset 8 (was 0, writing 8ffff000)
> PM: Writing back config space on device 0000:02:04.0 at offset 7 (was 0, writing 8c000000)
> PM: Writing back config space on device 0000:02:04.0 at offset 6 (was 0, writing b0060302)
> PM: Writing back config space on device 0000:02:04.0 at offset 4 (was 0, writing d4010000)
> PM: Writing back config space on device 0000:02:04.0 at offset 3 (was 820000, writing 82a810)
> PM: Writing back config space on device 0000:02:04.0 at offset 1 (was 2100000, writing 2100007)
> PM: Writing back config space on device 0000:02:04.1 at offset f (was 4020100, writing 402010a)
> PM: Writing back config space on device 0000:02:04.1 at offset 5 (was 0, writing d4014000)
> PM: Writing back config space on device 0000:02:04.1 at offset 4 (was 0, writing d4011000)
> PM: Writing back config space on device 0000:02:04.1 at offset 3 (was 800000, writing 804010)
> PM: Writing back config space on device 0000:02:04.1 at offset 1 (was 2100000, writing 2100006)
> ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[20] MMIO=[d4011000-d40117ff] Max Packet=[2048] IR/IT contexts=[4/8]
> PM: Writing back config space on device 0000:02:04.2 at offset f (was 40701ff, writing 407010a)
> PM: Writing back config space on device 0000:02:04.2 at offset 4 (was 0, writing d4018000)
> PM: Writing back config space on device 0000:02:04.2 at offset 3 (was 800000, writing 804010)
> PM: Writing back config space on device 0000:02:04.2 at offset 1 (was 2100000, writing 2100006)
> ACPI: PCI Interrupt 0000:02:04.2[A] -> GSI 20 (level, low) -> IRQ 20
> PM: Writing back config space on device 0000:02:04.3 at offset f (was 40701ff, writing 407010a)
> PM: Writing back config space on device 0000:02:04.3 at offset 4 (was 0, writing d4019000)
> PM: Writing back config space on device 0000:02:04.3 at offset 3 (was 800000, writing 804010)
> PM: Writing back config space on device 0000:02:04.3 at offset 1 (was 2100000, writing 2100006)
> ACPI: PCI Interrupt 0000:02:04.3[A] -> GSI 20 (level, low) -> IRQ 20
> sd 0:0:0:0: [sda] Starting disk
> ata2: SATA link down (SStatus 0 SControl 300)
> ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
> ata1.00: configured for UDMA/100
> sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
> sd 0:0:0:0: [sda] Write Protect is off
> sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
> sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
> hda: selected mode 0x22
> usb usb1: usb resume
> ehci_hcd 0000:00:13.2: resume root hub after power loss
> hub 1-0:1.0: trying to enable port power on non-switchable hub
> usb usb2: usb resume
> ohci_hcd 0000:00:13.0: lost power
> ohci_hcd 0000:00:13.0: OHCI controller state
> ohci_hcd 0000:00:13.0: OHCI 1.0, NO legacy support registers
> ohci_hcd 0000:00:13.0: control 0x083 HCFS=operational CBSR=3
> ohci_hcd 0000:00:13.0: cmdstatus 0x00000 SOC=0
> ohci_hcd 0000:00:13.0: intrstatus 0x00000004 SF
> ohci_hcd 0000:00:13.0: intrenable 0x8000005a MIE RHSC UE RD WDH
> ohci_hcd 0000:00:13.0: hcca frame #0005
> ohci_hcd 0000:00:13.0: roothub.a 02000204 POTPGT=2 NPS NDP=4(4)
> ohci_hcd 0000:00:13.0: roothub.b 00000000 PPCM=0000 DR=0000
> ohci_hcd 0000:00:13.0: roothub.status 00008000 DRWE
> ohci_hcd 0000:00:13.0: roothub.portstatus [0] 0x00000100 PPS
> ohci_hcd 0000:00:13.0: roothub.portstatus [1] 0x00000100 PPS
> ohci_hcd 0000:00:13.0: roothub.portstatus [2] 0x00000100 PPS
> ohci_hcd 0000:00:13.0: roothub.portstatus [3] 0x00000100 PPS
> ohci_hcd 0000:00:13.0: restart complete
> usb usb2: root hub lost power or was reset
> hub 2-0:1.0: trying to enable port power on non-switchable hub
> hub 2-0:1.0: logical disconnect on port 2
> usb usb3: usb resume
> ohci_hcd 0000:00:13.1: lost power
> ohci_hcd 0000:00:13.1: OHCI controller state
> ohci_hcd 0000:00:13.1: OHCI 1.0, NO legacy support registers
> ohci_hcd 0000:00:13.1: control 0x083 HCFS=operational CBSR=3
> ohci_hcd 0000:00:13.1: cmdstatus 0x00000 SOC=0
> ohci_hcd 0000:00:13.1: intrstatus 0x00000004 SF
> ohci_hcd 0000:00:13.1: intrenable 0x8000005a MIE RHSC UE RD WDH
> ohci_hcd 0000:00:13.1: hcca frame #000b
> ohci_hcd 0000:00:13.1: roothub.a 02000204 POTPGT=2 NPS NDP=4(4)
> ohci_hcd 0000:00:13.1: roothub.b 00000000 PPCM=0000 DR=0000
> ohci_hcd 0000:00:13.1: roothub.status 00008000 DRWE
> ohci_hcd 0000:00:13.1: roothub.portstatus [0] 0x00000100 PPS
> ohci_hcd 0000:00:13.1: roothub.portstatus [1] 0x00000100 PPS
> ohci_hcd 0000:00:13.1: roothub.portstatus [2] 0x00000100 PPS
> ohci_hcd 0000:00:13.1: roothub.portstatus [3] 0x00000100 PPS
> ohci_hcd 0000:00:13.1: restart complete
> usb usb3: root hub lost power or was reset
> hub 3-0:1.0: trying to enable port power on non-switchable hub
> hub 3-0:1.0: logical disconnect on port 1
> hub 3-0:1.0: logical disconnect on port 3
> PM: Finishing wakeup.
> Restarting tasks ... done.
> hub 1-0:1.0: state 7 ports 8 chg 0000 evt 004c
> ehci_hcd 0000:00:13.2: GetStatus port 2 status 001803 POWER sig=j CSC CONNECT
> hub 1-0:1.0: port 2, status 0501, change 0001, 480 Mb/s
> hub 1-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x501
> ehci_hcd 0000:00:13.2: port 2 full speed --> companion
> ehci_hcd 0000:00:13.2: GetStatus port 2 status 003801 POWER OWNER sig=j CONNECT
> hub 1-0:1.0: port 2 not reset yet, waiting 50ms
> ehci_hcd 0000:00:13.2: GetStatus port 2 status 003002 POWER OWNER sig=se0 CSC
> ehci_hcd 0000:00:13.2: GetStatus port 3 status 001803 POWER sig=j CSC CONNECT
> hub 1-0:1.0: port 3, status 0501, change 0001, 480 Mb/s
> hub 1-0:1.0: debounce: port 3: total 100ms stable 100ms status 0x501
> ehci_hcd 0000:00:13.2: port 3 full speed --> companion
> ehci_hcd 0000:00:13.2: GetStatus port 3 status 003801 POWER OWNER sig=j CONNECT
> hub 1-0:1.0: port 3 not reset yet, waiting 50ms
> ehci_hcd 0000:00:13.2: GetStatus port 3 status 003002 POWER OWNER sig=se0 CSC
> ehci_hcd 0000:00:13.2: GetStatus port 6 status 001403 POWER sig=k CSC CONNECT
> hub 1-0:1.0: port 6, status 0501, change 0001, 480 Mb/s
> hub 1-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x501
> ehci_hcd 0000:00:13.2: port 6 low speed --> companion
> ehci_hcd 0000:00:13.2: GetStatus port 6 status 003002 POWER OWNER sig=se0 CSC
> hub 2-0:1.0: state 7 ports 4 chg 0004 evt 0004
> ohci_hcd 0000:00:13.0: GetStatus roothub.portstatus [1] = 0x00010101 CSC PPS CCS
> hub 2-0:1.0: port 2, status 0101, change 0001, 12 Mb/s
> usb 2-2: USB disconnect, address 2
> usb 2-2: unregistering device
> usb 2-2: usb_disable_device nuking all URBs
> usb 2-2: unregistering interface 2-2:1.0
> usb 2-2:1.0: uevent
> usb 2-2:1.0: uevent
> usb 2-2: unregistering interface 2-2:1.1
> usb 2-2:1.1: uevent
> usb 2-2:1.1: uevent
> usb 2-2: unregistering interface 2-2:1.2
> usb 2-2:1.2: uevent
> usb 2-2:1.2: uevent
> usb 2-2: unregistering interface 2-2:1.3
> usb 2-2:1.3: uevent
> usb 2-2:1.3: uevent
> usb 2-2: uevent
> hub 2-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x101
> ohci_hcd 0000:00:13.0: GetStatus roothub.portstatus [1] = 0x00100103 PRSC PPS PES CCS
> usb 2-2: new full speed USB device using ohci_hcd and address 3
> ohci_hcd 0000:00:13.0: GetStatus roothub.portstatus [1] = 0x00100103 PRSC PPS PES CCS
> usb 2-2: skipped 1 descriptor after interface
> usb 2-2: default language 0x0409
> usb 2-2: uevent
> usb 2-2: usb_probe_device
> usb 2-2: configuration #1 chosen from 1 choice
> usb 2-2: adding 2-2:1.0 (config #1, interface 0)
> usb 2-2:1.0: uevent
> usb 2-2:1.0: uevent
> hci_usb 2-2:1.0: usb_probe_interface
> hci_usb 2-2:1.0: usb_probe_interface - got id
> usb 2-2: adding 2-2:1.1 (config #1, interface 1)
> usb 2-2:1.1: uevent
> usb 2-2:1.1: uevent
> usb 2-2: adding 2-2:1.2 (config #1, interface 2)
> usb 2-2:1.2: uevent
> usb 2-2:1.2: uevent
> hci_usb 2-2:1.2: usb_probe_interface
> hci_usb 2-2:1.2: usb_probe_interface - got id
> usb 2-2: adding 2-2:1.3 (config #1, interface 3)
> usb 2-2:1.3: uevent
> usb 2-2:1.3: uevent
> hci_usb 2-2:1.3: usb_probe_interface
> hci_usb 2-2:1.3: usb_probe_interface - got id
> /home/rafael/src/mm/linux-2.6.23-mm1/drivers/usb/core/inode.c: creating file '003'
> usb 2-2: new device found, idVendor=03f0, idProduct=171d
> usb 2-2: new device strings: Mfr=1, Product=2, SerialNumber=0
> usb 2-2: Product: HP Integrated Module
> usb 2-2: Manufacturer: Broadcom Corp
> hub 3-0:1.0: state 7 ports 4 chg 000a evt 000a
> ohci_hcd 0000:00:13.1: GetStatus roothub.portstatus [0] = 0x00010101 CSC PPS CCS
> hub 3-0:1.0: port 1, status 0101, change 0001, 12 Mb/s
> usb 3-1: USB disconnect, address 2
> usb 3-1: unregistering device
> usb 3-1: usb_disable_device nuking all URBs
> usb 3-1: unregistering interface 3-1:1.0
> usb 3-1:1.0: uevent
> usb 3-1:1.0: uevent
> usb 3-1: uevent
> hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x101
> ohci_hcd 0000:00:13.1: GetStatus roothub.portstatus [0] = 0x00100103 PRSC PPS PES CCS
> usb 3-1: new full speed USB device using ohci_hcd and address 4
> ohci_hcd 0000:00:13.1: GetStatus roothub.portstatus [0] = 0x00100103 PRSC PPS PES CCS
> usb 3-1: ep0 maxpacket = 8
> usb 3-1: default language 0x0409
> usb 3-1: uevent
> usb 3-1: usb_probe_device
> usb 3-1: configuration #1 chosen from 1 choice
> usb 3-1: adding 3-1:1.0 (config #1, interface 0)
> usb 3-1:1.0: uevent
> usb 3-1:1.0: uevent
> /home/rafael/src/mm/linux-2.6.23-mm1/drivers/usb/core/inode.c: creating file '004'
> usb 3-1: new device found, idVendor=08ff, idProduct=2580
> usb 3-1: new device strings: Mfr=0, Product=1, SerialNumber=0
> usb 3-1: Product: Fingerprint Sensor
> ohci_hcd 0000:00:13.1: GetStatus roothub.portstatus [2] = 0x00010301 CSC LSDA PPS CCS
> hub 3-0:1.0: port 3, status 0301, change 0001, 1.5 Mb/s
> usb 3-3: USB disconnect, address 3
> usb 3-3: unregistering device
> usb 3-3: usb_disable_device nuking all URBs
> usb 3-3: unregistering interface 3-3:1.0
> usb 3-3:1.0: uevent
> usb 3-3:1.0: uevent
> usb 3-3: unregistering interface 3-3:1.1
> /home/rafael/src/mm/linux-2.6.23-mm1/drivers/usb/core/file.c: removing 96 minor
> usb 3-3:1.1: uevent
> usb 3-3:1.1: uevent
> usb 3-3: uevent
> hub 3-0:1.0: debounce: port 3: total 100ms stable 100ms status 0x301
> ohci_hcd 0000:00:13.1: GetStatus roothub.portstatus [2] = 0x00100303 PRSC LSDA PPS PES CCS
> usb 3-3: new low speed USB device using ohci_hcd and address 5
> ohci_hcd 0000:00:13.1: GetStatus roothub.portstatus [2] = 0x00100303 PRSC LSDA PPS PES CCS
> usb 3-3: skipped 1 descriptor after interface
> usb 3-3: skipped 1 descriptor after interface
> usb 3-3: default language 0x0409
> usb 3-3: uevent
> usb 3-3: usb_probe_device
> usb 3-3: configuration #1 chosen from 1 choice
> usb 3-3: adding 3-3:1.0 (config #1, interface 0)
> usb 3-3:1.0: uevent
> usb 3-3:1.0: uevent
> usbhid 3-3:1.0: usb_probe_interface
> usbhid 3-3:1.0: usb_probe_interface - got id
> input: Logitech USB Receiver as /class/input/input8
> input: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:13.1-3
> usb 3-3: adding 3-3:1.1 (config #1, interface 1)
> usb 3-3:1.1: uevent
> usb 3-3:1.1: uevent
> usbhid 3-3:1.1: usb_probe_interface
> usbhid 3-3:1.1: usb_probe_interface - got id
> input: Logitech USB Receiver as /class/input/input9
> /home/rafael/src/mm/linux-2.6.23-mm1/drivers/usb/core/file.c: looking for a minor, starting at 96
> input,hiddev96: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:13.1-3
> /home/rafael/src/mm/linux-2.6.23-mm1/drivers/usb/core/inode.c: creating file '005'
> usb 3-3: new device found, idVendor=046d, idProduct=c521
> usb 3-3: new device strings: Mfr=1, Product=2, SerialNumber=0
> usb 3-3: Product: USB Receiver
> usb 3-3: Manufacturer: Logitech
> hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0040
> hub 2-0:1.0: state 7 ports 4 chg 0000 evt 0004
> hub 3-0:1.0: state 7 ports 4 chg 0000 evt 0008
> hub 1-0:1.0: hub_suspend
> usb usb1: bus auto-suspend
> ehci_hcd 0000:00:13.2: suspend root hub
> bcm43xx driver
> ACPI: PCI Interrupt 0000:30:00.0[A] -> GSI 18 (level, low) -> IRQ 18
> PCI: Setting latency timer of device 0000:30:00.0 to 64
> bcm43xx: Chip ID 0x4311, rev 0x1
> bcm43xx: Number of cores: 4
> bcm43xx: Core 0: ID 0x800, rev 0x11, vendor 0x4243
> bcm43xx: Core 1: ID 0x812, rev 0xa, vendor 0x4243
> bcm43xx: Core 2: ID 0x817, rev 0x3, vendor 0x4243
> bcm43xx: Core 3: ID 0x820, rev 0x1, vendor 0x4243
> bcm43xx: PHY connected
> bcm43xx: Detected PHY: Analog: 4, Type 2, Revision 8
> bcm43xx: Detected Radio: ID: 2205017f (Manuf: 17f Ver: 2050 Rev: 2)
> bcm43xx: Radio initialized
> bcm43xx: Radio initialized
> bcm43xx: PHY connected
> bcm43xx: Microcode rev 0x127, pl 0xe (2005-04-18 02:36:27)
> bcm43xx: Radio turned on
> bcm43xx: Radio enabled by hardware
> bcm43xx: Chip initialized
> bcm43xx: 32-bit DMA initialized
> bcm43xx: Keys cleared
> bcm43xx: Selected 802.11 core (phytype 2)
> ADDRCONF(NETDEV_UP): eth1: link is not ready
> SoftMAC: Scanning finished: scanned 13 channels starting with channel 1
> SoftMAC: Associate: Scanning for networks first.
> SoftMAC: Scanning finished: scanned 13 channels starting with channel 1
> SoftMAC: Queueing Authentication Request to 00:17:9a:f3:b5:75
> SoftMAC: Cannot associate without being authenticated, requested authentication
> SoftMAC: Sent Authentication Request to 00:17:9a:f3:b5:75.
> SoftMAC: Open Authentication completed with 00:17:9a:f3:b5:75
> SoftMAC: sent association request!
> SoftMAC: associated!
> ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
> SFW2-OUT-ERROR IN= OUT=eth1 SRC=0000:0000:0000:0000:0000:0000:0000:0000 DST=ff02:0000:0000:0000:0000:0000:0000:0016 LEN=76 TC=0 HOPLIMIT=1 FLOWLBL=0 OPT ( ) PROTO=ICMPv6 TYPE=143 CODE=0
> SoftMAC: Getting essid from req_essid
> SFW2-OUT-ERROR IN= OUT=eth1 SRC=0000:0000:0000:0000:0000:0000:0000:0000 DST=ff02:0000:0000:0000:0000:0001:ffbe:9531 LEN=64 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=ICMPv6 TYPE=135 CODE=0
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SFW2-OUT-ERROR IN= OUT=eth1 SRC=fe80:0000:0000:0000:0214:a5ff:febe:9531 DST=ff02:0000:0000:0000:0000:0000:0000:0002 LEN=56 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=ICMPv6 TYPE=133 CODE=0
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SFW2-OUT-ERROR IN= OUT=eth1 SRC=fe80:0000:0000:0000:0214:a5ff:febe:9531 DST=ff02:0000:0000:0000:0000:0000:0000:0002 LEN=56 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=ICMPv6 TYPE=133 CODE=0
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SFW2-OUT-ERROR IN= OUT=eth1 SRC=fe80:0000:0000:0000:0214:a5ff:febe:9531 DST=ff02:0000:0000:0000:0000:0000:0000:0016 LEN=76 TC=0 HOPLIMIT=1 FLOWLBL=0 OPT ( ) PROTO=ICMPv6 TYPE=143 CODE=0
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SFW2-OUT-ERROR IN= OUT=eth1 SRC=fe80:0000:0000:0000:0214:a5ff:febe:9531 DST=ff02:0000:0000:0000:0000:0000:0000:0002 LEN=56 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=ICMPv6 TYPE=133 CODE=0
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> eth1: no IPv6 routers present
> WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask()
>
> Call Trace:
> [<ffffffff88160769>] :snd_pcm:snd_pcm_hw_refine+0x292/0x3d9
> [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82
> [<ffffffff8021b2ea>] smp_call_function+0x23/0x25
> [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20
> [<ffffffff80437ace>] notifier_call_chain+0x33/0x65
> [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69
> [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11
> [<ffffffff8024ee6d>] update_target+0x71/0x76
> [<ffffffff8024eef4>] pm_qos_remove_requirement+0x82/0xc0
> [<ffffffff88160bbe>] :snd_pcm:snd_pcm_hw_params+0x30e/0x382
> [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc
> [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87
> [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f
> [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2
> [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199
> [<ffffffff8024b514>] remove_wait_queue+0x40/0x45
> [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2
> [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231
> [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39
> [<ffffffff80282e91>] vma_link+0xdd/0x10b
> [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a
> [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36
> [<ffffffff802a0896>] do_ioctl+0x2a/0x77
> [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e
> [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b
> [<ffffffff8020bfde>] system_call+0x7e/0x83
>
> WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask()
>
> Call Trace:
> [<ffffffff8021b2b2>] smp_call_function_mask+0x6d/0x82
> [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82
> [<ffffffff8021b2ea>] smp_call_function+0x23/0x25
> [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20
> [<ffffffff80437ace>] notifier_call_chain+0x33/0x65
> [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69
> [<ffffffff8024f07c>] pm_qos_add_requirement+0x24/0xd2
> [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11
> [<ffffffff8024ee6d>] update_target+0x71/0x76
> [<ffffffff8024f101>] pm_qos_add_requirement+0xa9/0xd2
> [<ffffffff88160bf9>] :snd_pcm:snd_pcm_hw_params+0x349/0x382
> [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc
> [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87
> [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f
> [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2
> [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199
> [<ffffffff8024b514>] remove_wait_queue+0x40/0x45
> [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2
> [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231
> [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39
> [<ffffffff80282e91>] vma_link+0xdd/0x10b
> [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a
> [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36
> [<ffffffff802a0896>] do_ioctl+0x2a/0x77
> [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e
> [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b
> [<ffffffff8020bfde>] system_call+0x7e/0x83
>
> SoftMAC: Getting essid from req_essid
> WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask()
>
> Call Trace:
> [<ffffffff88160769>] :snd_pcm:snd_pcm_hw_refine+0x292/0x3d9
> [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82
> [<ffffffff8021b2ea>] smp_call_function+0x23/0x25
> [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20
> [<ffffffff80437ace>] notifier_call_chain+0x33/0x65
> [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69
> [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11
> [<ffffffff8024ee6d>] update_target+0x71/0x76
> [<ffffffff8024eef4>] pm_qos_remove_requirement+0x82/0xc0
> [<ffffffff88160bbe>] :snd_pcm:snd_pcm_hw_params+0x30e/0x382
> [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc
> [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87
> [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f
> [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2
> [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199
> [<ffffffff8024b514>] remove_wait_queue+0x40/0x45
> [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2
> [<ffffffff8022f18e>] default_wake_function+0x0/0xf
> [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231
> [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39
> [<ffffffff80282e91>] vma_link+0xdd/0x10b
> [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a
> [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36
> [<ffffffff802a0896>] do_ioctl+0x2a/0x77
> [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e
> [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b
> [<ffffffff8020bfde>] system_call+0x7e/0x83
>
> WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask()
>
> Call Trace:
> [<ffffffff8021b2b2>] smp_call_function_mask+0x6d/0x82
> [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82
> [<ffffffff8021b2ea>] smp_call_function+0x23/0x25
> [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20
> [<ffffffff80437ace>] notifier_call_chain+0x33/0x65
> [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69
> [<ffffffff8024f07c>] pm_qos_add_requirement+0x24/0xd2
> [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11
> [<ffffffff8024ee6d>] update_target+0x71/0x76
> [<ffffffff8024f101>] pm_qos_add_requirement+0xa9/0xd2
> [<ffffffff88160bf9>] :snd_pcm:snd_pcm_hw_params+0x349/0x382
> [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc
> [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87
> [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f
> [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2
> [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199
> [<ffffffff8024b514>] remove_wait_queue+0x40/0x45
> [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2
> [<ffffffff8022f18e>] default_wake_function+0x0/0xf
> [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231
> [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39
> [<ffffffff80282e91>] vma_link+0xdd/0x10b
> [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a
> [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36
> [<ffffffff802a0896>] do_ioctl+0x2a/0x77
> [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e
> [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b
> [<ffffffff8020bfde>] system_call+0x7e/0x83
>
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask()
>
> Call Trace:
> [<ffffffff88160769>] :snd_pcm:snd_pcm_hw_refine+0x292/0x3d9
> [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82
> [<ffffffff8021b2ea>] smp_call_function+0x23/0x25
> [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20
> [<ffffffff80437ace>] notifier_call_chain+0x33/0x65
> [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69
> [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11
> [<ffffffff8024ee6d>] update_target+0x71/0x76
> [<ffffffff8024eef4>] pm_qos_remove_requirement+0x82/0xc0
> [<ffffffff88160bbe>] :snd_pcm:snd_pcm_hw_params+0x30e/0x382
> [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc
> [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87
> [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f
> [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2
> [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199
> [<ffffffff8024b514>] remove_wait_queue+0x40/0x45
> [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2
> [<ffffffff8022f18e>] default_wake_function+0x0/0xf
> [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231
> [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39
> [<ffffffff80282e91>] vma_link+0xdd/0x10b
> [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a
> [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36
> [<ffffffff802a0896>] do_ioctl+0x2a/0x77
> [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e
> [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b
> [<ffffffff8020bfde>] system_call+0x7e/0x83
>
> WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask()
>
> Call Trace:
> [<ffffffff8021b2b2>] smp_call_function_mask+0x6d/0x82
> [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82
> [<ffffffff8021b2ea>] smp_call_function+0x23/0x25
> [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20
> [<ffffffff80437ace>] notifier_call_chain+0x33/0x65
> [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69
> [<ffffffff8024f07c>] pm_qos_add_requirement+0x24/0xd2
> [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11
> [<ffffffff8024ee6d>] update_target+0x71/0x76
> [<ffffffff8024f101>] pm_qos_add_requirement+0xa9/0xd2
> [<ffffffff88160bf9>] :snd_pcm:snd_pcm_hw_params+0x349/0x382
> [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc
> [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87
> [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f
> [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2
> [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199
> [<ffffffff8024b514>] remove_wait_queue+0x40/0x45
> [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2
> [<ffffffff8022f18e>] default_wake_function+0x0/0xf
> [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231
> [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39
> [<ffffffff80282e91>] vma_link+0xdd/0x10b
> [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a
> [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36
> [<ffffffff802a0896>] do_ioctl+0x2a/0x77
> [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e
> [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b
> [<ffffffff8020bfde>] system_call+0x7e/0x83
>
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask()
>
> Call Trace:
> [<ffffffff88160769>] :snd_pcm:snd_pcm_hw_refine+0x292/0x3d9
> [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82
> [<ffffffff8021b2ea>] smp_call_function+0x23/0x25
> [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20
> [<ffffffff80437ace>] notifier_call_chain+0x33/0x65
> [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69
> [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11
> [<ffffffff8024ee6d>] update_target+0x71/0x76
> [<ffffffff8024eef4>] pm_qos_remove_requirement+0x82/0xc0
> [<ffffffff88160bbe>] :snd_pcm:snd_pcm_hw_params+0x30e/0x382
> [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc
> [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87
> [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f
> [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2
> [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199
> [<ffffffff8024b514>] remove_wait_queue+0x40/0x45
> [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2
> [<ffffffff8022f18e>] default_wake_function+0x0/0xf
> [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231
> [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39
> [<ffffffff80282e91>] vma_link+0xdd/0x10b
> [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a
> [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36
> [<ffffffff802a0896>] do_ioctl+0x2a/0x77
> [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e
> [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b
> [<ffffffff8020bfde>] system_call+0x7e/0x83
>
> WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask()
>
> Call Trace:
> [<ffffffff8021b2b2>] smp_call_function_mask+0x6d/0x82
> [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82
> [<ffffffff8021b2ea>] smp_call_function+0x23/0x25
> [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20
> [<ffffffff80437ace>] notifier_call_chain+0x33/0x65
> [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69
> [<ffffffff8024f07c>] pm_qos_add_requirement+0x24/0xd2
> [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11
> [<ffffffff8024ee6d>] update_target+0x71/0x76
> [<ffffffff8024f101>] pm_qos_add_requirement+0xa9/0xd2
> [<ffffffff88160bf9>] :snd_pcm:snd_pcm_hw_params+0x349/0x382
> [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc
> [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87
> [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f
> [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2
> [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199
> [<ffffffff8024b514>] remove_wait_queue+0x40/0x45
> [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2
> [<ffffffff8022f18e>] default_wake_function+0x0/0xf
> [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231
> [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39
> [<ffffffff80282e91>] vma_link+0xdd/0x10b
> [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a
> [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36
> [<ffffffff802a0896>] do_ioctl+0x2a/0x77
> [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e
> [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b
> [<ffffffff8020bfde>] system_call+0x7e/0x83
>
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> bcm43xx: Radio initialized
> bcm43xx: DMA-32 0x0200 (RX) max used slots: 1/64
> bcm43xx: DMA-32 0x02A0 (TX) max used slots: 0/512
> bcm43xx: DMA-32 0x0280 (TX) max used slots: 0/512
> bcm43xx: DMA-32 0x0260 (TX) max used slots: 0/512
> bcm43xx: DMA-32 0x0240 (TX) max used slots: 0/512
> bcm43xx: DMA-32 0x0220 (TX) max used slots: 2/512
> bcm43xx: DMA-32 0x0200 (TX) max used slots: 0/512
> ACPI: PCI interrupt for device 0000:30:00.0 disabled
> swsusp: Marking nosave pages: 000000000009f000 - 0000000000100000
> swsusp: Basic memory bitmaps created
> Syncing filesystems ... done.
> Freezing user space processes ... (elapsed 0.00 seconds) done.
> Freezing remaining freezable tasks ... (elapsed 0.19 seconds) done.
> Shrinking memory... -\done (15072 pages freed)
> Freed 60288 kbytes in 0.22 seconds (274.03 MB/s)
> Suspending device vcsa8
> Suspending device vcs8
> Suspending device vcsa10
> Suspending device vcs10
> Suspending device usbdev3.5
> Suspending device usbdev3.5_ep82
> Suspending device hiddev0
> Suspending device event3
> Suspending device input9
> Suspending device 3-3:1.1
> Suspending device usbdev3.5_ep81
> Suspending device event2
> Suspending device mouse0
> Suspending device input8
> Suspending device 3-3:1.0
> Suspending device usbdev3.5_ep00
> Suspending device 3-3
> Suspending device usbdev3.4
> Suspending device usbdev3.4_ep02
> Suspending device usbdev3.4_ep81
> Suspending device 3-1:1.0
> Suspending device usbdev3.4_ep00
> Suspending device 3-1
> Suspending device usbdev2.3
> Suspending device 2-2:1.3
> Suspending device usbdev2.3_ep04
> Suspending device usbdev2.3_ep84
> Suspending device 2-2:1.2
> Suspending device usbdev2.3_ep03
> Suspending device usbdev2.3_ep83
> Suspending device 2-2:1.1
> Suspending device usbdev2.3_ep02
> Suspending device usbdev2.3_ep82
> Suspending device usbdev2.3_ep81
> Suspending device hci0
> Suspending device 2-2:1.0
> Suspending device usbdev2.3_ep00
> Suspending device 2-2
> Suspending device vcsa4
> Suspending device vcs4
> Suspending device vcsa2
> Suspending device vcs2
> Suspending device vcsa6
> Suspending device vcs6
> Suspending device vcsa5
> Suspending device vcs5
> Suspending device vcsa3
> Suspending device vcs3
> Suspending device vcsa7
> Suspending device vcs7
> Suspending device audio
> Suspending device dsp
> Suspending device mixer
> Suspending device event7
> Suspending device input7
> Suspending device event6
> Suspending device input6
> Suspending device event5
> Suspending device input5
> Suspending device seq
> Suspending device C1BE
> Suspending device C1BF
> Suspending device C1BD
> Suspending device device-mapper
> Suspending device serio5
> Suspending device event4
> Suspending device mouse1
> Suspending device input4
> Suspending device bluetooth
> Suspending device usbdev3.1
> Suspending device usbdev3.1_ep81
> Suspending device 00023f9929613f0c
> Suspending device 00023f9929613f0c
> Suspending device 3-0:1.0
> Suspending device usbdev3.1_ep00
> Suspending device usb3
> hub 3-0:1.0: hub_suspend
> usb usb3: bus suspend
> ohci_hcd 0000:00:13.1: suspend root hub
> Suspending device pcmcia_socket0
> Suspending device usbdev2.1
> Suspending device usbdev2.1_ep81
> Suspending device 2-0:1.0
> Suspending device usbdev2.1_ep00
> Suspending device usb2
> hub 2-0:1.0: hub_suspend
> usb usb2: bus suspend
> ohci_hcd 0000:00:13.0: suspend root hub
> Suspending device hwmon0
> Suspending device usbdev1.1
> Suspending device usbdev1.1_ep81
> Suspending device 1-0:1.0
> Suspending device usbdev1.1_ep00
> Suspending device usb1
> Suspending device fw-host0
> Suspending device fw-host0
> Suspending device mmc0
> Suspending device i2c-0
> Suspending device eth0
> Suspending device controlC0
> Suspending device hwC0D0
> Suspending device hwC0D1
> Suspending device pcmC0D0c
> Suspending device pcmC0D0p
> Suspending device timer
> Suspending device vcsa1
> Suspending device vcs1
> Suspending device 0.0
> Suspending device ide0
> Suspending device network_throughput
> Suspending device network_latency
> Suspending device cpu_dma_latency
> Suspending device event1
> Suspending device event0
> Suspending device input1
> Suspending device input0
> Suspending device psaux
> Suspending device mice
> Suspending device serio4
> Suspending device serio3
> Suspending device serio2
> Suspending device serio1
> Suspending device serio0
> Suspending device i8042
> Suspending device 0:0:0:0
> sd 0:0:0:0: [sda] Synchronizing SCSI cache
> Suspending device target0:0:0
> Suspending device host1
> Suspending device host0
> Suspending device ttyS3
> Suspending device ttyS2
> Suspending device ttyS1
> Suspending device ttyS0
> Suspending device serial8250
> Suspending device nvram
> Suspending device hpet
> Suspending device rtc
> Suspending device ttysf
> Suspending device ttyse
> Suspending device ttysd
> Suspending device ttysc
> Suspending device ttysb
> Suspending device ttysa
> Suspending device ttys9
> Suspending device ttys8
> Suspending device ttys7
> Suspending device ttys6
> Suspending device ttys5
> Suspending device ttys4
> Suspending device ttys3
> Suspending device ttys2
> Suspending device ttys1
> Suspending device ttys0
> Suspending device ttyrf
> Suspending device ttyre
> Suspending device ttyrd
> Suspending device ttyrc
> Suspending device ttyrb
> Suspending device ttyra
> Suspending device ttyr9
> Suspending device ttyr8
> Suspending device ttyr7
> Suspending device ttyr6
> Suspending device ttyr5
> Suspending device ttyr4
> Suspending device ttyr3
> Suspending device ttyr2
> Suspending device ttyr1
> Suspending device ttyr0
> Suspending device ttyqf
> Suspending device ttyqe
> Suspending device ttyqd
> Suspending device ttyqc
> Suspending device ttyqb
> Suspending device ttyqa
> Suspending device ttyq9
> Suspending device ttyq8
> Suspending device ttyq7
> Suspending device ttyq6
> Suspending device ttyq5
> Suspending device ttyq4
> Suspending device ttyq3
> Suspending device ttyq2
> Suspending device ttyq1
> Suspending device ttyq0
> Suspending device ttypf
> Suspending device ttype
> Suspending device ttypd
> Suspending device ttypc
> Suspending device ttypb
> Suspending device ttypa
> Suspending device ttyp9
> Suspending device ttyp8
> Suspending device ttyp7
> Suspending device ttyp6
> Suspending device ttyp5
> Suspending device ttyp4
> Suspending device ttyp3
> Suspending device ttyp2
> Suspending device ttyp1
> Suspending device ttyp0
> Suspending device ptysf
> Suspending device ptyse
> Suspending device ptysd
> Suspending device ptysc
> Suspending device ptysb
> Suspending device ptysa
> Suspending device ptys9
> Suspending device ptys8
> Suspending device ptys7
> Suspending device ptys6
> Suspending device ptys5
> Suspending device ptys4
> Suspending device ptys3
> Suspending device ptys2
> Suspending device ptys1
> Suspending device ptys0
> Suspending device ptyrf
> Suspending device ptyre
> Suspending device ptyrd
> Suspending device ptyrc
> Suspending device ptyrb
> Suspending device ptyra
> Suspending device ptyr9
> Suspending device ptyr8
> Suspending device ptyr7
> Suspending device ptyr6
> Suspending device ptyr5
> Suspending device ptyr4
> Suspending device ptyr3
> Suspending device ptyr2
> Suspending device ptyr1
> Suspending device ptyr0
> Suspending device ptyqf
> Suspending device ptyqe
> Suspending device ptyqd
> Suspending device ptyqc
> Suspending device ptyqb
> Suspending device ptyqa
> Suspending device ptyq9
> Suspending device ptyq8
> Suspending device ptyq7
> Suspending device ptyq6
> Suspending device ptyq5
> Suspending device ptyq4
> Suspending device ptyq3
> Suspending device ptyq2
> Suspending device ptyq1
> Suspending device ptyq0
> Suspending device ptypf
> Suspending device ptype
> Suspending device ptypd
> Suspending device ptypc
> Suspending device ptypb
> Suspending device ptypa
> Suspending device ptyp9
> Suspending device ptyp8
> Suspending device ptyp7
> Suspending device ptyp6
> Suspending device ptyp5
> Suspending device ptyp4
> Suspending device ptyp3
> Suspending device ptyp2
> Suspending device ptyp1
> Suspending device ptyp0
> Suspending device tty63
> Suspending device tty62
> Suspending device tty61
> Suspending device tty60
> Suspending device tty59
> Suspending device tty58
> Suspending device tty57
> Suspending device tty56
> Suspending device tty55
> Suspending device tty54
> Suspending device tty53
> Suspending device tty52
> Suspending device tty51
> Suspending device tty50
> Suspending device tty49
> Suspending device tty48
> Suspending device tty47
> Suspending device tty46
> Suspending device tty45
> Suspending device tty44
> Suspending device tty43
> Suspending device tty42
> Suspending device tty41
> Suspending device tty40
> Suspending device tty39
> Suspending device tty38
> Suspending device tty37
> Suspending device tty36
> Suspending device tty35
> Suspending device tty34
> Suspending device tty33
> Suspending device tty32
> Suspending device tty31
> Suspending device tty30
> Suspending device tty29
> Suspending device tty28
> Suspending device tty27
> Suspending device tty26
> Suspending device tty25
> Suspending device tty24
> Suspending device tty23
> Suspending device tty22
> Suspending device tty21
> Suspending device tty20
> Suspending device tty19
> Suspending device tty18
> Suspending device tty17
> Suspending device tty16
> Suspending device tty15
> Suspending device tty14
> Suspending device tty13
> Suspending device tty12
> Suspending device tty11
> Suspending device tty10
> Suspending device tty9
> Suspending device tty8
> Suspending device tty7
> Suspending device tty6
> Suspending device tty5
> Suspending device tty4
> Suspending device tty3
> Suspending device tty2
> Suspending device tty1
> Suspending device vcsa
> Suspending device vcs
> Suspending device tty0
> Suspending device ptmx
> Suspending device console
> Suspending device tty
> Suspending device vtcon1
> Suspending device fb0
> Suspending device vesafb.0
> Suspending device fbcon
> Suspending device 0000:00:06.0:pcie03
> Suspending device 0000:00:06.0:pcie01
> Suspending device 0000:00:06.0:pcie00
> Suspending device 0000:00:05.0:pcie03
> Suspending device 0000:00:05.0:pcie01
> Suspending device 0000:00:05.0:pcie00
> Suspending device 0000:00:04.0:pcie03
> Suspending device 0000:00:04.0:pcie01
> Suspending device 0000:00:04.0:pcie00
> Suspending device snapshot
> Suspending device pcspkr
> Suspending device mcelog
> Suspending device lo
> Suspending device kmsg
> Suspending device urandom
> Suspending device random
> Suspending device full
> Suspending device zero
> Suspending device port
> Suspending device null
> Suspending device kmem
> Suspending device mem
> Suspending device 00:0c
> ACPI handle has no context!
> Suspending device 00:0b
> Suspending device 00:0a
> Suspending device 00:09
> Suspending device 00:08
> Suspending device 00:07
> Suspending device 00:06
> Suspending device 00:05
> Suspending device 00:04
> Suspending device 00:03
> Suspending device 00:02
> Suspending device 00:01
> Suspending device 00:00
> Suspending device pnp0
> Suspending device 0000:02
> Suspending device 0000:03
> Suspending device 0000:02:04.3
> ACPI handle has no context!
> ACPI: PCI interrupt for device 0000:02:04.3 disabled
> ACPI handle has no context!
> Suspending device 0000:02:04.2
> ACPI handle has no context!
> ACPI: PCI interrupt for device 0000:02:04.2 disabled
> ACPI handle has no context!
> Suspending device 0000:02:04.1
> ACPI handle has no context!
> Suspending device 0000:02:04.0
> Suspending device 0000:02:01.0
> Suspending device 0000:30
> Suspending device 0000:30:00.0
> Suspending device 0000:20
> Suspending device 0000:10
> Suspending device 0000:01
> Suspending device 0000:01:05.0
> Suspending device 0000:00:18.3
> Suspending device 0000:00:18.2
> Suspending device 0000:00:18.1
> Suspending device 0000:00:18.0
> Suspending device 0000:00:14.4
> Suspending device 0000:00:14.3
> Suspending device 0000:00:14.2
> ACPI: PCI interrupt for device 0000:00:14.2 disabled
> Suspending device 0000:00:14.1
> Suspending device 0000:00:14.0
> Suspending device 0000:00:13.2
> ACPI: PCI interrupt for device 0000:00:13.2 disabled
> ehci_hcd 0000:00:13.2: --> PCI D3
> Suspending device 0000:00:13.1
> ACPI: PCI interrupt for device 0000:00:13.1 disabled
> ohci_hcd 0000:00:13.1: --> PCI D0/legacy
> Suspending device 0000:00:13.0
> ACPI: PCI interrupt for device 0000:00:13.0 disabled
> ohci_hcd 0000:00:13.0: --> PCI D0/legacy
> Suspending device 0000:00:12.0
> ACPI: PCI interrupt for device 0000:00:12.0 disabled
> Suspending device 0000:00:06.0
> Suspending device 0000:00:05.0
> Suspending device 0000:00:04.0
> Suspending device 0000:00:01.0
> Suspending device 0000:00:00.0
> Suspending device 0000:00
> Suspending device pci0000:00
> Suspending device LNXTHERM:03
> Suspending device LNXTHERM:02
> Suspending device LNXTHERM:01
> Suspending device PNP0C0B:03
> Suspending device PNP0C0B:02
> ACPI: Transitioning device [C351] to D0
> ACPI: Transitioning device [C351] to D0
> Suspending device PNP0C0B:01
> ACPI: Transitioning device [C350] to D0
> ACPI: Transitioning device [C350] to D0
> Suspending device PNP0C0B:00
> ACPI: Transitioning device [C34F] to D0
> ACPI: Transitioning device [C34F] to D0
> Suspending device LNXPOWER:06
> Suspending device LNXPOWER:05
> Suspending device LNXPOWER:04
> Suspending device LNXPOWER:03
> Suspending device LNXTHERM:00
> Suspending device PNP0C02:02
> Suspending device PNP0C14:00
> Suspending device PNP0C0D:00
> Suspending device PNP0C0E:00
> Suspending device ACPI0003:00
> Suspending device PNP0C0A:01
> Suspending device PNP0C0A:00
> Suspending device HPQ0006:00
> Suspending device PNP0C02:01
> Suspending device device:49
> Suspending device device:48
> Suspending device device:47
> Suspending device device:46
> Suspending device device:45
> Suspending device device:44
> Suspending device device:43
> Suspending device device:42
> Suspending device device:41
> Suspending device device:40
> Suspending device device:3f
> Suspending device device:3e
> Suspending device device:3d
> Suspending device device:3c
> Suspending device device:3b
> Suspending device device:3a
> Suspending device device:39
> Suspending device device:38
> Suspending device device:37
> Suspending device device:36
> Suspending device device:35
> Suspending device device:34
> Suspending device device:33
> Suspending device PNP0C0F:07
> Suspending device PNP0C0F:06
> Suspending device PNP0C0F:05
> Suspending device PNP0C0F:04
> Suspending device PNP0C0F:03
> Suspending device PNP0C0F:02
> Suspending device PNP0C0F:01
> Suspending device PNP0C0F:00
> Suspending device device:32
> Suspending device device:31
> Suspending device device:30
> Suspending device device:2f
> Suspending device device:2e
> Suspending device device:2d
> Suspending device device:2c
> Suspending device device:2b
> Suspending device device:2a
> Suspending device device:29
> Suspending device device:28
> Suspending device device:27
> Suspending device device:26
> Suspending device device:25
> Suspending device device:24
> Suspending device device:23
> Suspending device device:22
> Suspending device device:21
> Suspending device device:20
> Suspending device device:1f
> Suspending device device:1e
> Suspending device device:1d
> Suspending device device:1c
> Suspending device device:1b
> Suspending device device:1a
> Suspending device device:19
> Suspending device device:18
> Suspending device device:17
> Suspending device device:16
> Suspending device device:15
> Suspending device device:14
> Suspending device device:13
> Suspending device device:12
> Suspending device device:11
> Suspending device device:10
> Suspending device PNP0C02:00
> Suspending device PNP0000:00
> Suspending device LNXPOWER:02
> Suspending device SYN0118:00
> Suspending device PNP0303:00
> Suspending device PNP0B00:00
> Suspending device PNP0800:00
> Suspending device PNP0200:00
> Suspending device PNP0100:00
> Suspending device PNP0C04:00
> Suspending device IFX0102:00
> Suspending device LNXPOWER:01
> Suspending device PNP0401:00
> Suspending device PNP0A06:00
> Suspending device PNP0C09:00
> Suspending device device:0f
> Suspending device device:0e
> Suspending device LNXPOWER:00
> Suspending device device:0d
> Suspending device device:0c
> Suspending device device:0b
> Suspending device device:0a
> Suspending device device:09
> Suspending device device:08
> Suspending device device:07
> Suspending device device:06
> Suspending device device:05
> Suspending device device:04
> Suspending device device:03
> Suspending device device:02
> Suspending device LNXVIDEO:00
> Suspending device device:01
> Suspending device PNP0A03:00
> Suspending device PNP0C01:00
> Suspending device device:00
> Suspending device ACPI0007:01
> Suspending device ACPI0007:00
> Suspending device LNXPWRBN:00
> Suspending device LNXSYSTM:00
> Suspending device id
> Suspending device vtcon0
> Suspending device platform
> Disabling non-boot CPUs ...
> CPU0 attaching NULL sched-domain.
> CPU1 attaching NULL sched-domain.
> CPU 1 is now offline
> SMP alternatives: switching to UP code
> CPU0 attaching NULL sched-domain.
> CPU1 is down
> Extended CMOS year: 2000
> swsusp: critical section:
> swsusp: Need to copy 149622 pages
> swsusp: Normal pages needed: 149622 + 1024 + 36, available pages: 341743
> evxfevnt-0079 [00] enable : System is already in ACPI mode
> Extended CMOS year: 2000
> Enabling non-boot CPUs ...
> CPU0 attaching NULL sched-domain.
> SMP alternatives: switching to SMP code
> Booting processor 1/2 APIC 0x1
> Initializing CPU#1
> Calibrating delay using timer specific routine.. 3990.20 BogoMIPS (lpj=7980408)
> CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
> CPU: L2 Cache: 512K (64 bytes/line)
> CPU: Physical Processor ID: 0
> CPU: Processor Core ID: 1
> AMD Turion(tm) 64 X2 Mobile Technology TL-60 stepping 02
> Clockevents: could not switch to one-shot mode: lapic is not functional.
> CPU0 attaching sched-domain:
> Could not switch to high resolution mode on CPU 1
> domain 0: span 00000000,00000000,00000000,00000003
> groups: 00000000,00000000,00000000,00000001 00000000,00000000,00000000,00000002
> CPU1 attaching sched-domain:
> domain 0: span 00000000,00000000,00000000,00000003
> groups: 00000000,00000000,00000000,00000002 00000000,00000000,00000000,00000001
> CPU1 is up
> ACPI: Transitioning device [C34F] to D3
> ACPI: Transitioning device [C34F] to D3
> ACPI: Transitioning device [C350] to D3
> ACPI: Transitioning device [C350] to D3
> PM: Writing back config space on device 0000:00:01.0 at offset 7 (was 2206161, writing 22206161)
> PCI: Setting latency timer of device 0000:00:04.0 to 64
> PCI: Setting latency timer of device 0000:00:05.0 to 64
> PCI: Setting latency timer of device 0000:00:06.0 to 64
> PM: Writing back config space on device 0000:00:12.0 at offset 1 (was 2b00003, writing 2b00007)
> ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 16 (level, low) -> IRQ 16
> ohci_hcd 0000:00:13.0: PCI legacy resume
> ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 19 (level, low) -> IRQ 19
> ohci_hcd 0000:00:13.1: PCI legacy resume
> ACPI: PCI Interrupt 0000:00:13.1[A] -> GSI 19 (level, low) -> IRQ 19
> ehci_hcd 0000:00:13.2: PCI D0, from previous PCI D3
> ACPI: PCI Interrupt 0000:00:13.2[A] -> GSI 19 (level, low) -> IRQ 19
> PM: Writing back config space on device 0000:00:13.2 at offset 1 (was 2b00007, writing 2b00017)
> ehci_hcd 0000:00:13.2: lost power, restarting
> usb usb1: root hub lost power or was reset
> ehci_hcd 0000:00:13.2: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT
> ehci_hcd 0000:00:13.2: MWI active
> ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 16
> PM: Writing back config space on device 0000:00:14.2 at offset f (was 10a, writing a)
> PM: Writing back config space on device 0000:00:14.2 at offset 1 (was 4100006, writing 4100002)
> ACPI: PCI Interrupt 0000:00:14.2[A] -> GSI 16 (level, low) -> IRQ 16
> PM: Writing back config space on device 0000:00:14.4 at offset 6 (was 40030200, writing 40060200)
> PM: Writing back config space on device 0000:30:00.0 at offset 1 (was 100007, writing 100003)
> PM: Writing back config space on device 0000:02:04.0 at offset f (was 3c4010a, writing 5c0010a)
> PM: Writing back config space on device 0000:02:04.0 at offset 3 (was 824010, writing 82a810)
> ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[20] MMIO=[d4011000-d40117ff] Max Packet=[2048] IR/IT contexts=[4/8]
> ACPI: PCI Interrupt 0000:02:04.2[A] -> GSI 20 (level, low) -> IRQ 20
> ACPI: PCI Interrupt 0000:02:04.3[A] -> GSI 20 (level, low) -> IRQ 20
> sd 0:0:0:0: [sda] Starting disk
> ata2: SATA link down (SStatus 0 SControl 300)
> ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
> ata1.00: configured for UDMA/100
> sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
> sd 0:0:0:0: [sda] Write Protect is off
> sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
> sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
> hda: selected mode 0x22
> usb usb1: usb resume
> ehci_hcd 0000:00:13.2: resume root hub after power loss
> hub 1-0:1.0: trying to enable port power on non-switchable hub
> usb usb2: usb resume
> ohci_hcd 0000:00:13.0: BIOS/SMM active, control 008
> ohci_hcd 0000:00:13.0: OHCI controller state
> ohci_hcd 0000:00:13.0: OHCI 1.0, NO legacy support registers
> ohci_hcd 0000:00:13.0: control 0x083 HCFS=operational CBSR=3
> ohci_hcd 0000:00:13.0: cmdstatus 0x00000 SOC=0
> ohci_hcd 0000:00:13.0: intrstatus 0x00000004 SF
> ohci_hcd 0000:00:13.0: intrenable 0x8000005a MIE RHSC UE RD WDH
> ohci_hcd 0000:00:13.0: hcca frame #0005
> ohci_hcd 0000:00:13.0: roothub.a 02000204 POTPGT=2 NPS NDP=4(4)
> ohci_hcd 0000:00:13.0: roothub.b 00000000 PPCM=0000 DR=0000
> ohci_hcd 0000:00:13.0: roothub.status 00008000 DRWE
> ohci_hcd 0000:00:13.0: roothub.portstatus [0] 0x00000100 PPS
> ohci_hcd 0000:00:13.0: roothub.portstatus [1] 0x00010100 CSC PPS
> ohci_hcd 0000:00:13.0: roothub.portstatus [2] 0x00000100 PPS
> ohci_hcd 0000:00:13.0: roothub.portstatus [3] 0x00000100 PPS
> ohci_hcd 0000:00:13.0: restart complete
> usb usb2: root hub lost power or was reset
> hub 2-0:1.0: trying to enable port power on non-switchable hub
> hub 2-0:1.0: logical disconnect on port 2
> usb usb3: usb resume
> ohci_hcd 0000:00:13.1: BIOS/SMM active, control 008
> ohci_hcd 0000:00:13.1: OHCI controller state
> ohci_hcd 0000:00:13.1: OHCI 1.0, NO legacy support registers
> ohci_hcd 0000:00:13.1: control 0x083 HCFS=operational CBSR=3
> ohci_hcd 0000:00:13.1: cmdstatus 0x00000 SOC=0
> ohci_hcd 0000:00:13.1: intrstatus 0x00000004 SF
> ohci_hcd 0000:00:13.1: intrenable 0x8000005a MIE RHSC UE RD WDH
> ohci_hcd 0000:00:13.1: hcca frame #0005
> ohci_hcd 0000:00:13.1: roothub.a 02000204 POTPGT=2 NPS NDP=4(4)
> ohci_hcd 0000:00:13.1: roothub.b 00000000 PPCM=0000 DR=0000
> ohci_hcd 0000:00:13.1: roothub.status 00008000 DRWE
> ohci_hcd 0000:00:13.1: roothub.portstatus [0] 0x00010100 CSC PPS
> ohci_hcd 0000:00:13.1: roothub.portstatus [1] 0x00000100 PPS
> ohci_hcd 0000:00:13.1: roothub.portstatus [2] 0x00010100 CSC PPS
> ohci_hcd 0000:00:13.1: roothub.portstatus [3] 0x00000100 PPS
> ohci_hcd 0000:00:13.1: restart complete
> usb usb3: root hub lost power or was reset
> hub 3-0:1.0: trying to enable port power on non-switchable hub
> hub 3-0:1.0: logical disconnect on port 1
> hub 3-0:1.0: logical disconnect on port 3
> Restarting tasks ... <7>hub 1-0:1.0: state 7 ports 8 chg 0000 evt 004c
> ehci_hcd 0000:00:13.2: GetStatus port 2 status 001803 POWER sig=j CSC CONNECT
> hub 1-0:1.0: port 2, status 0501, change 0001, 480 Mb/s
> done.
> swsusp: Basic memory bitmaps freed
> hub 1-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x501
> ehci_hcd 0000:00:13.2: port 2 full speed --> companion
> ehci_hcd 0000:00:13.2: GetStatus port 2 status 003801 POWER OWNER sig=j CONNECT
> hub 1-0:1.0: port 2 not reset yet, waiting 50ms
> ehci_hcd 0000:00:13.2: GetStatus port 2 status 003002 POWER OWNER sig=se0 CSC
> ehci_hcd 0000:00:13.2: GetStatus port 3 status 001803 POWER sig=j CSC CONNECT
> hub 1-0:1.0: port 3, status 0501, change 0001, 480 Mb/s
> hub 1-0:1.0: debounce: port 3: total 100ms stable 100ms status 0x501
> ehci_hcd 0000:00:13.2: port 3 full speed --> companion
> ehci_hcd 0000:00:13.2: GetStatus port 3 status 003801 POWER OWNER sig=j CONNECT
> hub 1-0:1.0: port 3 not reset yet, waiting 50ms
> ehci_hcd 0000:00:13.2: GetStatus port 3 status 003002 POWER OWNER sig=se0 CSC
> ehci_hcd 0000:00:13.2: GetStatus port 6 status 001403 POWER sig=k CSC CONNECT
> hub 1-0:1.0: port 6, status 0501, change 0001, 480 Mb/s
> hub 1-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x501
> ehci_hcd 0000:00:13.2: port 6 low speed --> companion
> ehci_hcd 0000:00:13.2: GetStatus port 6 status 003002 POWER OWNER sig=se0 CSC
> hub 2-0:1.0: state 7 ports 4 chg 0004 evt 0004
> ohci_hcd 0000:00:13.0: GetStatus roothub.portstatus [1] = 0x00010101 CSC PPS CCS
> hub 2-0:1.0: port 2, status 0101, change 0001, 12 Mb/s
> usb 2-2: USB disconnect, address 3
> usb 2-2: unregistering device
> usb 2-2: usb_disable_device nuking all URBs
> usb 2-2: unregistering interface 2-2:1.0
> usb 2-2:1.0: uevent
> usb 2-2:1.0: uevent
> usb 2-2: unregistering interface 2-2:1.1
> usb 2-2:1.1: uevent
> usb 2-2:1.1: uevent
> usb 2-2: unregistering interface 2-2:1.2
> usb 2-2:1.2: uevent
> usb 2-2:1.2: uevent
> usb 2-2: unregistering interface 2-2:1.3
> usb 2-2:1.3: uevent
> usb 2-2:1.3: uevent
> usb 2-2: uevent
> hub 2-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x101
> ohci_hcd 0000:00:13.0: GetStatus roothub.portstatus [1] = 0x00100103 PRSC PPS PES CCS
> usb 2-2: new full speed USB device using ohci_hcd and address 4
> ohci_hcd 0000:00:13.0: GetStatus roothub.portstatus [1] = 0x00100103 PRSC PPS PES CCS
> usb 2-2: skipped 1 descriptor after interface
> usb 2-2: default language 0x0409
> usb 2-2: uevent
> usb 2-2: usb_probe_device
> usb 2-2: configuration #1 chosen from 1 choice
> usb 2-2: adding 2-2:1.0 (config #1, interface 0)
> usb 2-2:1.0: uevent
> usb 2-2:1.0: uevent
> hci_usb 2-2:1.0: usb_probe_interface
> hci_usb 2-2:1.0: usb_probe_interface - got id
> usb 2-2: adding 2-2:1.1 (config #1, interface 1)
> usb 2-2:1.1: uevent
> usb 2-2:1.1: uevent
> usb 2-2: adding 2-2:1.2 (config #1, interface 2)
> usb 2-2:1.2: uevent
> usb 2-2:1.2: uevent
> hci_usb 2-2:1.2: usb_probe_interface
> hci_usb 2-2:1.2: usb_probe_interface - got id
> usb 2-2: adding 2-2:1.3 (config #1, interface 3)
> usb 2-2:1.3: uevent
> usb 2-2:1.3: uevent
> hci_usb 2-2:1.3: usb_probe_interface
> hci_usb 2-2:1.3: usb_probe_interface - got id
> /home/rafael/src/mm/linux-2.6.23-mm1/drivers/usb/core/inode.c: creating file '004'
> usb 2-2: new device found, idVendor=03f0, idProduct=171d
> usb 2-2: new device strings: Mfr=1, Product=2, SerialNumber=0
> usb 2-2: Product: HP Integrated Module
> usb 2-2: Manufacturer: Broadcom Corp
> hub 3-0:1.0: state 7 ports 4 chg 000a evt 000a
> ohci_hcd 0000:00:13.1: GetStatus roothub.portstatus [0] = 0x00010101 CSC PPS CCS
> hub 3-0:1.0: port 1, status 0101, change 0001, 12 Mb/s
> usb 3-1: USB disconnect, address 4
> usb 3-1: unregistering device
> usb 3-1: usb_disable_device nuking all URBs
> usb 3-1: unregistering interface 3-1:1.0
> usb 3-1:1.0: uevent
> usb 3-1:1.0: uevent
> usb 3-1: uevent
> hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x101
> ohci_hcd 0000:00:13.1: GetStatus roothub.portstatus [0] = 0x00100103 PRSC PPS PES CCS
> usb 3-1: new full speed USB device using ohci_hcd and address 6
> ohci_hcd 0000:00:13.1: GetStatus roothub.portstatus [0] = 0x00100103 PRSC PPS PES CCS
> usb 3-1: ep0 maxpacket = 8
> usb 3-1: default language 0x0409
> usb 3-1: uevent
> usb 3-1: usb_probe_device
> usb 3-1: configuration #1 chosen from 1 choice
> usb 3-1: adding 3-1:1.0 (config #1, interface 0)
> usb 3-1:1.0: uevent
> usb 3-1:1.0: uevent
> /home/rafael/src/mm/linux-2.6.23-mm1/drivers/usb/core/inode.c: creating file '006'
> usb 3-1: new device found, idVendor=08ff, idProduct=2580
> usb 3-1: new device strings: Mfr=0, Product=1, SerialNumber=0
> usb 3-1: Product: Fingerprint Sensor
> ohci_hcd 0000:00:13.1: GetStatus roothub.portstatus [2] = 0x00010301 CSC LSDA PPS CCS
> hub 3-0:1.0: port 3, status 0301, change 0001, 1.5 Mb/s
> usb 3-3: USB disconnect, address 5
> usb 3-3: unregistering device
> usb 3-3: usb_disable_device nuking all URBs
> usb 3-3: unregistering interface 3-3:1.0
> usb 3-3:1.0: uevent
> usb 3-3:1.0: uevent
> usb 3-3: unregistering interface 3-3:1.1
> /home/rafael/src/mm/linux-2.6.23-mm1/drivers/usb/core/file.c: removing 96 minor
> usb 3-3:1.1: uevent
> usb 3-3:1.1: uevent
> usb 3-3: uevent
> hub 3-0:1.0: debounce: port 3: total 100ms stable 100ms status 0x301
> ohci_hcd 0000:00:13.1: GetStatus roothub.portstatus [2] = 0x00100303 PRSC LSDA PPS PES CCS
> usb 3-3: new low speed USB device using ohci_hcd and address 7
> ohci_hcd 0000:00:13.1: GetStatus roothub.portstatus [2] = 0x00100303 PRSC LSDA PPS PES CCS
> usb 3-3: skipped 1 descriptor after interface
> usb 3-3: skipped 1 descriptor after interface
> usb 3-3: default language 0x0409
> usb 3-3: uevent
> usb 3-3: usb_probe_device
> usb 3-3: configuration #1 chosen from 1 choice
> usb 3-3: adding 3-3:1.0 (config #1, interface 0)
> usb 3-3:1.0: uevent
> usb 3-3:1.0: uevent
> usbhid 3-3:1.0: usb_probe_interface
> usbhid 3-3:1.0: usb_probe_interface - got id
> input: Logitech USB Receiver as /class/input/input10
> input: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:13.1-3
> usb 3-3: adding 3-3:1.1 (config #1, interface 1)
> usb 3-3:1.1: uevent
> usb 3-3:1.1: uevent
> usbhid 3-3:1.1: usb_probe_interface
> usbhid 3-3:1.1: usb_probe_interface - got id
> input: Logitech USB Receiver as /class/input/input11
> /home/rafael/src/mm/linux-2.6.23-mm1/drivers/usb/core/file.c: looking for a minor, starting at 96
> input,hiddev96: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:13.1-3
> /home/rafael/src/mm/linux-2.6.23-mm1/drivers/usb/core/inode.c: creating file '007'
> usb 3-3: new device found, idVendor=046d, idProduct=c521
> usb 3-3: new device strings: Mfr=1, Product=2, SerialNumber=0
> usb 3-3: Product: USB Receiver
> usb 3-3: Manufacturer: Logitech
> hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0040
> hub 2-0:1.0: state 7 ports 4 chg 0000 evt 0004
> hub 3-0:1.0: state 7 ports 4 chg 0000 evt 0008
> hub 1-0:1.0: hub_suspend
> usb usb1: bus auto-suspend
> ehci_hcd 0000:00:13.2: suspend root hub
> bcm43xx driver
> ACPI: PCI Interrupt 0000:30:00.0[A] -> GSI 18 (level, low) -> IRQ 18
> PCI: Setting latency timer of device 0000:30:00.0 to 64
> bcm43xx: Chip ID 0x4311, rev 0x1
> bcm43xx: Number of cores: 4
> bcm43xx: Core 0: ID 0x800, rev 0x11, vendor 0x4243
> bcm43xx: Core 1: ID 0x812, rev 0xa, vendor 0x4243
> bcm43xx: Core 2: ID 0x817, rev 0x3, vendor 0x4243
> bcm43xx: Core 3: ID 0x820, rev 0x1, vendor 0x4243
> bcm43xx: PHY connected
> bcm43xx: Detected PHY: Analog: 4, Type 2, Revision 8
> bcm43xx: Detected Radio: ID: 2205017f (Manuf: 17f Ver: 2050 Rev: 2)
> bcm43xx: Radio initialized
> bcm43xx: Radio initialized
> bcm43xx: PHY connected
> bcm43xx: Microcode rev 0x127, pl 0xe (2005-04-18 02:36:27)
> bcm43xx: Radio turned on
> bcm43xx: Radio enabled by hardware
> bcm43xx: Chip initialized
> bcm43xx: 32-bit DMA initialized
> bcm43xx: Keys cleared
> bcm43xx: Selected 802.11 core (phytype 2)
> ADDRCONF(NETDEV_UP): eth1: link is not ready
> SoftMAC: Scanning finished: scanned 13 channels starting with channel 1
> SoftMAC: Associate: Scanning for networks first.
> SoftMAC: Scanning finished: scanned 13 channels starting with channel 1
> SoftMAC: Queueing Authentication Request to 00:17:9a:f3:b5:75
> SoftMAC: Cannot associate without being authenticated, requested authentication
> SoftMAC: Sent Authentication Request to 00:17:9a:f3:b5:75.
> SoftMAC: Open Authentication completed with 00:17:9a:f3:b5:75
> SoftMAC: sent association request!
> SoftMAC: associated!
> ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
> SFW2-OUT-ERROR IN= OUT=eth1 SRC=0000:0000:0000:0000:0000:0000:0000:0000 DST=ff02:0000:0000:0000:0000:0000:0000:0016 LEN=76 TC=0 HOPLIMIT=1 FLOWLBL=0 OPT ( ) PROTO=ICMPv6 TYPE=143 CODE=0
> SoftMAC: Getting essid from req_essid
> SFW2-OUT-ERROR IN= OUT=eth1 SRC=0000:0000:0000:0000:0000:0000:0000:0000 DST=ff02:0000:0000:0000:0000:0001:ffbe:9531 LEN=64 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=ICMPv6 TYPE=135 CODE=0
> SoftMAC: Getting essid from req_essid
> SFW2-OUT-ERROR IN= OUT=eth1 SRC=fe80:0000:0000:0000:0214:a5ff:febe:9531 DST=ff02:0000:0000:0000:0000:0000:0000:0002 LEN=56 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=ICMPv6 TYPE=133 CODE=0
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SFW2-OUT-ERROR IN= OUT=eth1 SRC=fe80:0000:0000:0000:0214:a5ff:febe:9531 DST=ff02:0000:0000:0000:0000:0000:0000:0016 LEN=76 TC=0 HOPLIMIT=1 FLOWLBL=0 OPT ( ) PROTO=ICMPv6 TYPE=143 CODE=0
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SFW2-OUT-ERROR IN= OUT=eth1 SRC=fe80:0000:0000:0000:0214:a5ff:febe:9531 DST=ff02:0000:0000:0000:0000:0000:0000:0002 LEN=56 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=ICMPv6 TYPE=133 CODE=0
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SFW2-INext-DROP-DEFLT IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:17:9a:f3:b5:75:08:00 SRC=62.121.83.254 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0xC0 TTL=1 ID=19492 PROTO=2
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SFW2-OUT-ERROR IN= OUT=eth1 SRC=fe80:0000:0000:0000:0214:a5ff:febe:9531 DST=ff02:0000:0000:0000:0000:0000:0000:0002 LEN=56 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=ICMPv6 TYPE=133 CODE=0
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> eth1: no IPv6 routers present
> WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask()
>
> Call Trace:
> [<ffffffff88160769>] :snd_pcm:snd_pcm_hw_refine+0x292/0x3d9
> [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82
> [<ffffffff8021b2ea>] smp_call_function+0x23/0x25
> [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20
> [<ffffffff80437ace>] notifier_call_chain+0x33/0x65
> [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69
> [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11
> [<ffffffff8024ee6d>] update_target+0x71/0x76
> [<ffffffff8024eef4>] pm_qos_remove_requirement+0x82/0xc0
> [<ffffffff88160bbe>] :snd_pcm:snd_pcm_hw_params+0x30e/0x382
> [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc
> [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87
> [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f
> [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2
> [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199
> [<ffffffff8024b514>] remove_wait_queue+0x40/0x45
> [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2
> [<ffffffff8022f18e>] default_wake_function+0x0/0xf
> [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231
> [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39
> [<ffffffff80282e91>] vma_link+0xdd/0x10b
> [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a
> [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36
> [<ffffffff802a0896>] do_ioctl+0x2a/0x77
> [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e
> [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b
> [<ffffffff8020bfde>] system_call+0x7e/0x83
>
> WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask()
>
> Call Trace:
> [<ffffffff8021b2b2>] smp_call_function_mask+0x6d/0x82
> [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82
> [<ffffffff8021b2ea>] smp_call_function+0x23/0x25
> [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20
> [<ffffffff80437ace>] notifier_call_chain+0x33/0x65
> [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69
> [<ffffffff8024f07c>] pm_qos_add_requirement+0x24/0xd2
> [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11
> [<ffffffff8024ee6d>] update_target+0x71/0x76
> [<ffffffff8024f101>] pm_qos_add_requirement+0xa9/0xd2
> [<ffffffff88160bf9>] :snd_pcm:snd_pcm_hw_params+0x349/0x382
> [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc
> [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87
> [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f
> [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2
> [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199
> [<ffffffff8024b514>] remove_wait_queue+0x40/0x45
> [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2
> [<ffffffff8022f18e>] default_wake_function+0x0/0xf
> [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231
> [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39
> [<ffffffff80282e91>] vma_link+0xdd/0x10b
> [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a
> [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36
> [<ffffffff802a0896>] do_ioctl+0x2a/0x77
> [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e
> [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b
> [<ffffffff8020bfde>] system_call+0x7e/0x83
>
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask()
>
> Call Trace:
> [<ffffffff88160769>] :snd_pcm:snd_pcm_hw_refine+0x292/0x3d9
> [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82
> [<ffffffff8021b2ea>] smp_call_function+0x23/0x25
> [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20
> [<ffffffff80437ace>] notifier_call_chain+0x33/0x65
> [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69
> [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11
> [<ffffffff8024ee6d>] update_target+0x71/0x76
> [<ffffffff8024eef4>] pm_qos_remove_requirement+0x82/0xc0
> [<ffffffff88160bbe>] :snd_pcm:snd_pcm_hw_params+0x30e/0x382
> [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc
> [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87
> [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f
> [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2
> [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199
> [<ffffffff8024b514>] remove_wait_queue+0x40/0x45
> [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2
> [<ffffffff8022f18e>] default_wake_function+0x0/0xf
> [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231
> [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39
> [<ffffffff80282e91>] vma_link+0xdd/0x10b
> [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a
> [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36
> [<ffffffff802a0896>] do_ioctl+0x2a/0x77
> [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e
> [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b
> [<ffffffff8020bfde>] system_call+0x7e/0x83
>
> WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask()
>
> Call Trace:
> [<ffffffff8021b2b2>] smp_call_function_mask+0x6d/0x82
> [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82
> [<ffffffff8021b2ea>] smp_call_function+0x23/0x25
> [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20
> [<ffffffff80437ace>] notifier_call_chain+0x33/0x65
> [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69
> [<ffffffff8024f07c>] pm_qos_add_requirement+0x24/0xd2
> [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11
> [<ffffffff8024ee6d>] update_target+0x71/0x76
> [<ffffffff8024f101>] pm_qos_add_requirement+0xa9/0xd2
> [<ffffffff88160bf9>] :snd_pcm:snd_pcm_hw_params+0x349/0x382
> [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc
> [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87
> [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f
> [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2
> [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199
> [<ffffffff8024b514>] remove_wait_queue+0x40/0x45
> [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2
> [<ffffffff8022f18e>] default_wake_function+0x0/0xf
> [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231
> [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39
> [<ffffffff80282e91>] vma_link+0xdd/0x10b
> [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a
> [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36
> [<ffffffff802a0896>] do_ioctl+0x2a/0x77
> [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e
> [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b
> [<ffffffff8020bfde>] system_call+0x7e/0x83
>
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SFW2-INext-DROP-DEFLT IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:17:9a:f3:b5:75:08:00 SRC=62.121.83.254 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0xC0 TTL=1 ID=21260 PROTO=2
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SFW2-INext-DROP-DEFLT IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:17:9a:f3:b5:75:08:00 SRC=62.121.83.254 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0xC0 TTL=1 ID=23324 PROTO=2
> SoftMAC: Getting essid from req_essid
> WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask()
>
> Call Trace:
> [<ffffffff88160769>] :snd_pcm:snd_pcm_hw_refine+0x292/0x3d9
> [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82
> [<ffffffff8021b2ea>] smp_call_function+0x23/0x25
> [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20
> [<ffffffff80437ace>] notifier_call_chain+0x33/0x65
> [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69
> [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11
> [<ffffffff8024ee6d>] update_target+0x71/0x76
> [<ffffffff8024eef4>] pm_qos_remove_requirement+0x82/0xc0
> [<ffffffff88160bbe>] :snd_pcm:snd_pcm_hw_params+0x30e/0x382
> [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc
> [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87
> [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f
> [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2
> [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199
> [<ffffffff8024b514>] remove_wait_queue+0x40/0x45
> [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2
> [<ffffffff8022f18e>] default_wake_function+0x0/0xf
> [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231
> [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39
> [<ffffffff80282e91>] vma_link+0xdd/0x10b
> [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a
> [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36
> [<ffffffff802a0896>] do_ioctl+0x2a/0x77
> [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e
> [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b
> [<ffffffff8020bfde>] system_call+0x7e/0x83
>
> WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask()
>
> Call Trace:
> [<ffffffff8021b2b2>] smp_call_function_mask+0x6d/0x82
> [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82
> [<ffffffff8021b2ea>] smp_call_function+0x23/0x25
> [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20
> [<ffffffff80437ace>] notifier_call_chain+0x33/0x65
> [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69
> [<ffffffff8024f07c>] pm_qos_add_requirement+0x24/0xd2
> [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11
> [<ffffffff8024ee6d>] update_target+0x71/0x76
> [<ffffffff8024f101>] pm_qos_add_requirement+0xa9/0xd2
> [<ffffffff88160bf9>] :snd_pcm:snd_pcm_hw_params+0x349/0x382
> [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc
> [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87
> [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f
> [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2
> [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199
> [<ffffffff8024b514>] remove_wait_queue+0x40/0x45
> [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2
> [<ffffffff8022f18e>] default_wake_function+0x0/0xf
> [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231
> [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39
> [<ffffffff80282e91>] vma_link+0xdd/0x10b
> [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a
> [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36
> [<ffffffff802a0896>] do_ioctl+0x2a/0x77
> [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e
> [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b
> [<ffffffff8020bfde>] system_call+0x7e/0x83
>
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask()
>
> Call Trace:
> [<ffffffff88160769>] :snd_pcm:snd_pcm_hw_refine+0x292/0x3d9
> [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82
> [<ffffffff8021b2ea>] smp_call_function+0x23/0x25
> [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20
> [<ffffffff80437ace>] notifier_call_chain+0x33/0x65
> [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69
> [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11
> [<ffffffff8024ee6d>] update_target+0x71/0x76
> [<ffffffff8024eef4>] pm_qos_remove_requirement+0x82/0xc0
> [<ffffffff88160bbe>] :snd_pcm:snd_pcm_hw_params+0x30e/0x382
> [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc
> [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87
> [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f
> [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2
> [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199
> [<ffffffff8024b514>] remove_wait_queue+0x40/0x45
> [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2
> [<ffffffff8022f18e>] default_wake_function+0x0/0xf
> [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231
> [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39
> [<ffffffff80282e91>] vma_link+0xdd/0x10b
> [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a
> [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36
> [<ffffffff802a0896>] do_ioctl+0x2a/0x77
> [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e
> [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b
> [<ffffffff8020bfde>] system_call+0x7e/0x83
>
> WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask()
>
> Call Trace:
> [<ffffffff8021b2b2>] smp_call_function_mask+0x6d/0x82
> [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82
> [<ffffffff8021b2ea>] smp_call_function+0x23/0x25
> [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20
> [<ffffffff80437ace>] notifier_call_chain+0x33/0x65
> [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69
> [<ffffffff8024f07c>] pm_qos_add_requirement+0x24/0xd2
> [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11
> [<ffffffff8024ee6d>] update_target+0x71/0x76
> [<ffffffff8024f101>] pm_qos_add_requirement+0xa9/0xd2
> [<ffffffff88160bf9>] :snd_pcm:snd_pcm_hw_params+0x349/0x382
> [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc
> [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87
> [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f
> [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2
> [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199
> [<ffffffff8024b514>] remove_wait_queue+0x40/0x45
> [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2
> [<ffffffff8022f18e>] default_wake_function+0x0/0xf
> [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231
> [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39
> [<ffffffff80282e91>] vma_link+0xdd/0x10b
> [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a
> [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36
> [<ffffffff802a0896>] do_ioctl+0x2a/0x77
> [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e
> [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b
> [<ffffffff8020bfde>] system_call+0x7e/0x83
>
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask()
>
> Call Trace:
> [<ffffffff88160769>] :snd_pcm:snd_pcm_hw_refine+0x292/0x3d9
> [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82
> [<ffffffff8021b2ea>] smp_call_function+0x23/0x25
> [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20
> [<ffffffff80437ace>] notifier_call_chain+0x33/0x65
> [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69
> [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11
> [<ffffffff8024ee6d>] update_target+0x71/0x76
> [<ffffffff8024eef4>] pm_qos_remove_requirement+0x82/0xc0
> [<ffffffff88160bbe>] :snd_pcm:snd_pcm_hw_params+0x30e/0x382
> [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc
> [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87
> [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f
> [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2
> [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199
> [<ffffffff8024b514>] remove_wait_queue+0x40/0x45
> [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2
> [<ffffffff8022f18e>] default_wake_function+0x0/0xf
> [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231
> [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39
> [<ffffffff80282e91>] vma_link+0xdd/0x10b
> [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a
> [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36
> [<ffffffff802a0896>] do_ioctl+0x2a/0x77
> [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e
> [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b
> [<ffffffff8020bfde>] system_call+0x7e/0x83
>
> WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask()
>
> Call Trace:
> [<ffffffff8021b2b2>] smp_call_function_mask+0x6d/0x82
> [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82
> [<ffffffff8021b2ea>] smp_call_function+0x23/0x25
> [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20
> [<ffffffff80437ace>] notifier_call_chain+0x33/0x65
> [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69
> [<ffffffff8024f07c>] pm_qos_add_requirement+0x24/0xd2
> [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11
> [<ffffffff8024ee6d>] update_target+0x71/0x76
> [<ffffffff8024f101>] pm_qos_add_requirement+0xa9/0xd2
> [<ffffffff88160bf9>] :snd_pcm:snd_pcm_hw_params+0x349/0x382
> [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc
> [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87
> [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f
> [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2
> [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199
> [<ffffffff8024b514>] remove_wait_queue+0x40/0x45
> [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2
> [<ffffffff8022f18e>] default_wake_function+0x0/0xf
> [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231
> [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39
> [<ffffffff80282e91>] vma_link+0xdd/0x10b
> [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a
> [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36
> [<ffffffff802a0896>] do_ioctl+0x2a/0x77
> [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e
> [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b
> [<ffffffff8020bfde>] system_call+0x7e/0x83
>
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask()
>
> Call Trace:
> [<ffffffff88160769>] :snd_pcm:snd_pcm_hw_refine+0x292/0x3d9
> [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82
> [<ffffffff8021b2ea>] smp_call_function+0x23/0x25
> [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20
> [<ffffffff80437ace>] notifier_call_chain+0x33/0x65
> [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69
> [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11
> [<ffffffff8024ee6d>] update_target+0x71/0x76
> [<ffffffff8024eef4>] pm_qos_remove_requirement+0x82/0xc0
> [<ffffffff88160bbe>] :snd_pcm:snd_pcm_hw_params+0x30e/0x382
> [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc
> [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87
> [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f
> [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2
> [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199
> [<ffffffff8024b514>] remove_wait_queue+0x40/0x45
> [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2
> [<ffffffff8022f18e>] default_wake_function+0x0/0xf
> [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231
> [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39
> [<ffffffff80282e91>] vma_link+0xdd/0x10b
> [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a
> [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36
> [<ffffffff802a0896>] do_ioctl+0x2a/0x77
> [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e
> [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b
> [<ffffffff8020bfde>] system_call+0x7e/0x83
>
> WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask()
>
> Call Trace:
> [<ffffffff8021b2b2>] smp_call_function_mask+0x6d/0x82
> [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82
> [<ffffffff8021b2ea>] smp_call_function+0x23/0x25
> [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20
> [<ffffffff80437ace>] notifier_call_chain+0x33/0x65
> [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69
> [<ffffffff8024f07c>] pm_qos_add_requirement+0x24/0xd2
> [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11
> [<ffffffff8024ee6d>] update_target+0x71/0x76
> [<ffffffff8024f101>] pm_qos_add_requirement+0xa9/0xd2
> [<ffffffff88160bf9>] :snd_pcm:snd_pcm_hw_params+0x349/0x382
> [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc
> [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87
> [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f
> [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2
> [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199
> [<ffffffff8024b514>] remove_wait_queue+0x40/0x45
> [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2
> [<ffffffff8022f18e>] default_wake_function+0x0/0xf
> [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231
> [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39
> [<ffffffff80282e91>] vma_link+0xdd/0x10b
> [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a
> [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36
> [<ffffffff802a0896>] do_ioctl+0x2a/0x77
> [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e
> [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b
> [<ffffffff8020bfde>] system_call+0x7e/0x83
>
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask()
>
> Call Trace:
> [<ffffffff88160769>] :snd_pcm:snd_pcm_hw_refine+0x292/0x3d9
> [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82
> [<ffffffff8021b2ea>] smp_call_function+0x23/0x25
> [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20
> [<ffffffff80437ace>] notifier_call_chain+0x33/0x65
> [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69
> [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11
> [<ffffffff8024ee6d>] update_target+0x71/0x76
> [<ffffffff8024eef4>] pm_qos_remove_requirement+0x82/0xc0
> [<ffffffff88160bbe>] :snd_pcm:snd_pcm_hw_params+0x30e/0x382
> [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc
> [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87
> [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f
> [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2
> [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199
> [<ffffffff8024b514>] remove_wait_queue+0x40/0x45
> [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2
> [<ffffffff8022f18e>] default_wake_function+0x0/0xf
> [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231
> [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39
> [<ffffffff80282e91>] vma_link+0xdd/0x10b
> [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a
> [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36
> [<ffffffff802a0896>] do_ioctl+0x2a/0x77
> [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e
> [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b
> [<ffffffff8020bfde>] system_call+0x7e/0x83
>
> WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask()
>
> Call Trace:
> [<ffffffff8021b2b2>] smp_call_function_mask+0x6d/0x82
> [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82
> [<ffffffff8021b2ea>] smp_call_function+0x23/0x25
> [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20
> [<ffffffff80437ace>] notifier_call_chain+0x33/0x65
> [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69
> [<ffffffff8024f07c>] pm_qos_add_requirement+0x24/0xd2
> [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11
> [<ffffffff8024ee6d>] update_target+0x71/0x76
> [<ffffffff8024f101>] pm_qos_add_requirement+0xa9/0xd2
> [<ffffffff88160bf9>] :snd_pcm:snd_pcm_hw_params+0x349/0x382
> [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc
> [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87
> [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f
> [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2
> [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199
> [<ffffffff8024b514>] remove_wait_queue+0x40/0x45
> [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2
> [<ffffffff8022f18e>] default_wake_function+0x0/0xf
> [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231
> [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39
> [<ffffffff80282e91>] vma_link+0xdd/0x10b
> [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a
> [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36
> [<ffffffff802a0896>] do_ioctl+0x2a/0x77
> [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e
> [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b
> [<ffffffff8020bfde>] system_call+0x7e/0x83
>
> SoftMAC: Getting essid from req_essid
> SFW2-INext-DROP-DEFLT IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:17:9a:f3:b5:75:08:00 SRC=62.121.83.254 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0xC0 TTL=1 ID=25180 PROTO=2
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask()
>
> Call Trace:
> [<ffffffff88160769>] :snd_pcm:snd_pcm_hw_refine+0x292/0x3d9
> [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82
> [<ffffffff8021b2ea>] smp_call_function+0x23/0x25
> [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20
> [<ffffffff80437ace>] notifier_call_chain+0x33/0x65
> [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69
> [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11
> [<ffffffff8024ee6d>] update_target+0x71/0x76
> [<ffffffff8024eef4>] pm_qos_remove_requirement+0x82/0xc0
> [<ffffffff88160bbe>] :snd_pcm:snd_pcm_hw_params+0x30e/0x382
> [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc
> [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87
> [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f
> [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2
> [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199
> [<ffffffff8024b514>] remove_wait_queue+0x40/0x45
> [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2
> [<ffffffff8022f18e>] default_wake_function+0x0/0xf
> [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231
> [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39
> [<ffffffff80282e91>] vma_link+0xdd/0x10b
> [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a
> [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36
> [<ffffffff802a0896>] do_ioctl+0x2a/0x77
> [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e
> [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b
> [<ffffffff8020bfde>] system_call+0x7e/0x83
>
> WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask()
>
> Call Trace:
> [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82
> [<ffffffff8021b2ea>] smp_call_function+0x23/0x25
> [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20
> [<ffffffff80437ace>] notifier_call_chain+0x33/0x65
> [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69
> [<ffffffff8024f07c>] pm_qos_add_requirement+0x24/0xd2
> [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11
> [<ffffffff8024ee6d>] update_target+0x71/0x76
> [<ffffffff8024f101>] pm_qos_add_requirement+0xa9/0xd2
> [<ffffffff88160bf9>] :snd_pcm:snd_pcm_hw_params+0x349/0x382
> [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc
> [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87
> [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f
> [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2
> [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199
> [<ffffffff8024b514>] remove_wait_queue+0x40/0x45
> [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2
> [<ffffffff8022f18e>] default_wake_function+0x0/0xf
> [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231
> [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39
> [<ffffffff80282e91>] vma_link+0xdd/0x10b
> [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a
> [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36
> [<ffffffff802a0896>] do_ioctl+0x2a/0x77
> [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e
> [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b
> [<ffffffff8020bfde>] system_call+0x7e/0x83
>
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask()
>
> Call Trace:
> [<ffffffff88160769>] :snd_pcm:snd_pcm_hw_refine+0x292/0x3d9
> [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82
> [<ffffffff8021b2ea>] smp_call_function+0x23/0x25
> [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20
> [<ffffffff80437ace>] notifier_call_chain+0x33/0x65
> [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69
> [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11
> [<ffffffff8024ee6d>] update_target+0x71/0x76
> [<ffffffff8024eef4>] pm_qos_remove_requirement+0x82/0xc0
> [<ffffffff88160bbe>] :snd_pcm:snd_pcm_hw_params+0x30e/0x382
> [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc
> [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87
> [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f
> [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2
> [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199
> [<ffffffff8024b514>] remove_wait_queue+0x40/0x45
> [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2
> [<ffffffff8022f18e>] default_wake_function+0x0/0xf
> [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231
> [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39
> [<ffffffff80282e91>] vma_link+0xdd/0x10b
> [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a
> [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36
> [<ffffffff802a0896>] do_ioctl+0x2a/0x77
> [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e
> [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b
> [<ffffffff8020bfde>] system_call+0x7e/0x83
>
> WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask()
>
> Call Trace:
> [<ffffffff8021b2b2>] smp_call_function_mask+0x6d/0x82
> [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82
> [<ffffffff8021b2ea>] smp_call_function+0x23/0x25
> [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20
> [<ffffffff80437ace>] notifier_call_chain+0x33/0x65
> [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69
> [<ffffffff8024f07c>] pm_qos_add_requirement+0x24/0xd2
> [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11
> [<ffffffff8024ee6d>] update_target+0x71/0x76
> [<ffffffff8024f101>] pm_qos_add_requirement+0xa9/0xd2
> [<ffffffff88160bf9>] :snd_pcm:snd_pcm_hw_params+0x349/0x382
> [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc
> [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87
> [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f
> [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2
> [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199
> [<ffffffff8024b514>] remove_wait_queue+0x40/0x45
> [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2
> [<ffffffff8022f18e>] default_wake_function+0x0/0xf
> [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231
> [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39
> [<ffffffff80282e91>] vma_link+0xdd/0x10b
> [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a
> [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36
> [<ffffffff802a0896>] do_ioctl+0x2a/0x77
> [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e
> [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b
> [<ffffffff8020bfde>] system_call+0x7e/0x83
>
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask()
>
> Call Trace:
> [<ffffffff88160769>] :snd_pcm:snd_pcm_hw_refine+0x292/0x3d9
> [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82
> [<ffffffff8021b2ea>] smp_call_function+0x23/0x25
> [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20
> [<ffffffff80437ace>] notifier_call_chain+0x33/0x65
> [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69
> [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11
> [<ffffffff8024ee6d>] update_target+0x71/0x76
> [<ffffffff8024eef4>] pm_qos_remove_requirement+0x82/0xc0
> [<ffffffff88160bbe>] :snd_pcm:snd_pcm_hw_params+0x30e/0x382
> [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc
> [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87
> [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f
> [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2
> [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199
> [<ffffffff8024b514>] remove_wait_queue+0x40/0x45
> [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2
> [<ffffffff8022f18e>] default_wake_function+0x0/0xf
> [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231
> [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39
> [<ffffffff80282e91>] vma_link+0xdd/0x10b
> [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a
> [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36
> [<ffffffff802a0896>] do_ioctl+0x2a/0x77
> [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e
> [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b
> [<ffffffff8020bfde>] system_call+0x7e/0x83
>
> WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask()
>
> Call Trace:
> [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82
> [<ffffffff8021b2ea>] smp_call_function+0x23/0x25
> [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20
> [<ffffffff80437ace>] notifier_call_chain+0x33/0x65
> [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69
> [<ffffffff8024f07c>] pm_qos_add_requirement+0x24/0xd2
> [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11
> [<ffffffff8024ee6d>] update_target+0x71/0x76
> [<ffffffff8024f101>] pm_qos_add_requirement+0xa9/0xd2
> [<ffffffff88160bf9>] :snd_pcm:snd_pcm_hw_params+0x349/0x382
> [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc
> [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87
> [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f
> [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2
> [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199
> [<ffffffff8024b514>] remove_wait_queue+0x40/0x45
> [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2
> [<ffffffff8022f18e>] default_wake_function+0x0/0xf
> [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231
> [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39
> [<ffffffff80282e91>] vma_link+0xdd/0x10b
> [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a
> [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36
> [<ffffffff802a0896>] do_ioctl+0x2a/0x77
> [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e
> [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b
> [<ffffffff8020bfde>] system_call+0x7e/0x83
>
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SFW2-INext-DROP-DEFLT IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:17:9a:f3:b5:75:08:00 SRC=62.121.83.254 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0xC0 TTL=1 ID=26892 PROTO=2
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask()
>
> Call Trace:
> [<ffffffff88160769>] :snd_pcm:snd_pcm_hw_refine+0x292/0x3d9
> [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82
> [<ffffffff8021b2ea>] smp_call_function+0x23/0x25
> [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20
> [<ffffffff80437ace>] notifier_call_chain+0x33/0x65
> [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69
> [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11
> [<ffffffff8024ee6d>] update_target+0x71/0x76
> [<ffffffff8024eef4>] pm_qos_remove_requirement+0x82/0xc0
> [<ffffffff88160bbe>] :snd_pcm:snd_pcm_hw_params+0x30e/0x382
> [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc
> [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87
> [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f
> [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2
> [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199
> [<ffffffff8024b514>] remove_wait_queue+0x40/0x45
> [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2
> [<ffffffff8022f18e>] default_wake_function+0x0/0xf
> [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231
> [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39
> [<ffffffff80282e91>] vma_link+0xdd/0x10b
> [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a
> [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36
> [<ffffffff802a0896>] do_ioctl+0x2a/0x77
> [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e
> [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b
> [<ffffffff8020bfde>] system_call+0x7e/0x83
>
> WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask()
>
> Call Trace:
> [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82
> [<ffffffff8021b2ea>] smp_call_function+0x23/0x25
> [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20
> [<ffffffff80437ace>] notifier_call_chain+0x33/0x65
> [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69
> [<ffffffff8024f07c>] pm_qos_add_requirement+0x24/0xd2
> [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11
> [<ffffffff8024ee6d>] update_target+0x71/0x76
> [<ffffffff8024f101>] pm_qos_add_requirement+0xa9/0xd2
> [<ffffffff88160bf9>] :snd_pcm:snd_pcm_hw_params+0x349/0x382
> [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc
> [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87
> [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f
> [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2
> [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199
> [<ffffffff8024b514>] remove_wait_queue+0x40/0x45
> [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2
> [<ffffffff8022f18e>] default_wake_function+0x0/0xf
> [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231
> [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39
> [<ffffffff80282e91>] vma_link+0xdd/0x10b
> [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a
> [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36
> [<ffffffff802a0896>] do_ioctl+0x2a/0x77
> [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e
> [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b
> [<ffffffff8020bfde>] system_call+0x7e/0x83
>
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask()
>
> Call Trace:
> [<ffffffff88160769>] :snd_pcm:snd_pcm_hw_refine+0x292/0x3d9
> [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82
> [<ffffffff8021b2ea>] smp_call_function+0x23/0x25
> [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20
> [<ffffffff80437ace>] notifier_call_chain+0x33/0x65
> [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69
> [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11
> [<ffffffff8024ee6d>] update_target+0x71/0x76
> [<ffffffff8024eef4>] pm_qos_remove_requirement+0x82/0xc0
> [<ffffffff88160bbe>] :snd_pcm:snd_pcm_hw_params+0x30e/0x382
> [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc
> [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87
> [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f
> [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2
> [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199
> [<ffffffff8024b514>] remove_wait_queue+0x40/0x45
> [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2
> [<ffffffff8022f18e>] default_wake_function+0x0/0xf
> [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231
> [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39
> [<ffffffff80282e91>] vma_link+0xdd/0x10b
> [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a
> [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36
> [<ffffffff802a0896>] do_ioctl+0x2a/0x77
> [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e
> [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b
> [<ffffffff8020bfde>] system_call+0x7e/0x83
>
> WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask()
>
> Call Trace:
> [<ffffffff8021b2b2>] smp_call_function_mask+0x6d/0x82
> [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82
> [<ffffffff8021b2ea>] smp_call_function+0x23/0x25
> [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20
> [<ffffffff80437ace>] notifier_call_chain+0x33/0x65
> [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69
> [<ffffffff8024f07c>] pm_qos_add_requirement+0x24/0xd2
> [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11
> [<ffffffff8024ee6d>] update_target+0x71/0x76
> [<ffffffff8024f101>] pm_qos_add_requirement+0xa9/0xd2
> [<ffffffff88160bf9>] :snd_pcm:snd_pcm_hw_params+0x349/0x382
> [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc
> [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87
> [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f
> [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2
> [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199
> [<ffffffff8024b514>] remove_wait_queue+0x40/0x45
> [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2
> [<ffffffff8022f18e>] default_wake_function+0x0/0xf
> [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231
> [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39
> [<ffffffff80282e91>] vma_link+0xdd/0x10b
> [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a
> [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36
> [<ffffffff802a0896>] do_ioctl+0x2a/0x77
> [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e
> [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b
> [<ffffffff8020bfde>] system_call+0x7e/0x83
>
> SoftMAC: Getting essid from req_essid
> WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask()
>
> Call Trace:
> [<ffffffff88160769>] :snd_pcm:snd_pcm_hw_refine+0x292/0x3d9
> [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82
> [<ffffffff8021b2ea>] smp_call_function+0x23/0x25
> [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20
> [<ffffffff80437ace>] notifier_call_chain+0x33/0x65
> [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69
> [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11
> [<ffffffff8024ee6d>] update_target+0x71/0x76
> [<ffffffff8024eef4>] pm_qos_remove_requirement+0x82/0xc0
> [<ffffffff88160bbe>] :snd_pcm:snd_pcm_hw_params+0x30e/0x382
> [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc
> [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87
> [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f
> [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2
> [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199
> [<ffffffff8024b514>] remove_wait_queue+0x40/0x45
> [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2
> [<ffffffff8022f18e>] default_wake_function+0x0/0xf
> [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231
> [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39
> [<ffffffff80282e91>] vma_link+0xdd/0x10b
> [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a
> [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36
> [<ffffffff802a0896>] do_ioctl+0x2a/0x77
> [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e
> [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b
> [<ffffffff8020bfde>] system_call+0x7e/0x83
>
> WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask()
>
> Call Trace:
> [<ffffffff8021b2b2>] smp_call_function_mask+0x6d/0x82
> [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82
> [<ffffffff8021b2ea>] smp_call_function+0x23/0x25
> [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20
> [<ffffffff80437ace>] notifier_call_chain+0x33/0x65
> [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69
> [<ffffffff8024f07c>] pm_qos_add_requirement+0x24/0xd2
> [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11
> [<ffffffff8024ee6d>] update_target+0x71/0x76
> [<ffffffff8024f101>] pm_qos_add_requirement+0xa9/0xd2
> [<ffffffff88160bf9>] :snd_pcm:snd_pcm_hw_params+0x349/0x382
> [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc
> [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87
> [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f
> [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2
> [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199
> [<ffffffff8024b514>] remove_wait_queue+0x40/0x45
> [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2
> [<ffffffff8022f18e>] default_wake_function+0x0/0xf
> [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231
> [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39
> [<ffffffff80282e91>] vma_link+0xdd/0x10b
> [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a
> [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36
> [<ffffffff802a0896>] do_ioctl+0x2a/0x77
> [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e
> [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b
> [<ffffffff8020bfde>] system_call+0x7e/0x83
>
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
> SoftMAC: Getting essid from req_essid
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
