Re: vga text console not working on 2.6.23-rc8

["H. Peter Anvin" <hpa@zytor.com>]

Santiago Garcia Mantinan wrote:
> Hi!
> 
> I have just compiled a 2.6.23-rc8 using the config from my 2.6.22 as a basis
> and I came out with a not working (almost black) vga text console.
> 
> This is what I'm getting on my logs:
> 
> Console: colour dummy device 80x25
> console [tty0] enabled
> 
> Instead of the old:
> 
> Console: colour VGA+ 80x25
> 
> The options related to the console on my config are these:
> 
> CONFIG_VT=y
> CONFIG_VT_CONSOLE=y
> CONFIG_HW_CONSOLE=y
> CONFIG_SERIAL_8250=y
> CONFIG_SERIAL_8250_CONSOLE=y
> CONFIG_SERIAL_CORE=y
> CONFIG_SERIAL_CORE_CONSOLE=y
> CONFIG_VGA_CONSOLE=y
> CONFIG_VIDEO_SELECT=y
> CONFIG_DUMMY_CONSOLE=y
> 
> The machine is a AMD x64 X2 Athlon with a NForce 4 chipset, vga is a ATI
> radeon and I have also set:
> 
> CONFIG_DRM=m
> CONFIG_DRM_RADEON=m
> 
> I have tried with and without CONFIG_VIDEO_SELECT and
> CONFIG_VIDEO_OUTPUT_CONTROL with the same results. BTW: when X starts the
> display is Ok.
> 
> If you want me to do any tests or need more info just tell me.
> 

Please send me your .config as well as /etc/grub.conf and the output of
/proc/cmdline.

It would also be useful if you could do the following:

- remove __initdata from the boot_params line in
arch/i386/kernel/setup.c or x86_boot_params in arch/x86_64/kernel/setup.c.

- Compile the kernel with CONFIG_DEBUG_INFO=y

- With the new kernel running, do:

gdb vmlinux /proc/kcore
p/x &boot_params [for x86-64, p/x &x86_boot_params]
dump binary memory bootparams.bin <address> <address>+4096

	-hpa
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/