Re: 2.6.23-rc7-mm1 AHCI ATA errors -- won't boot

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Bernd Schmidt wrote:
> One of these appears in my system as well (ASUS P5W-DH Deluxe
> mainboard).  Here's the hdparm output:

Yup, same mainboard here.

> Since about 2.6.17 or 2.6.18, it has been causing long delays while
> booting:
> ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> ata2.00: qc timeout (cmd 0xec)
> ata2.00: failed to IDENTIFY (I/O error, err_mask=0x5)
> ata2: port is slow to respond, please be patient (Status 0x80)
> ata2: COMRESET failed (errno=-16)
> ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> ata2.00: ATA-6: Config  Disk, RGL10364, max UDMA/133
> ata2.00: 640 sectors, multi 1: LBA
> ata2.00: configured for UDMA/133

And yup, same problem with the painful boot delays since 2.6.18.  Tejun
indicated that a fix would get merged with 2.6.23, but that didn't
happen.  Here's hoping something makes it into .24!

Berck
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[Index of Archives]     [Kernel Newbies]     [Netfilter]     [Bugtraq]     [Photo]     [Stuff]     [Gimp]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Video 4 Linux]     [Linux for the blind]     [Linux Resources]
  Powered by Linux