Greetings,
I get a few million of these on boot-- the system never actually boots.
Works fine in 2.6.23-rc7.
[ 50.456012] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 50.462484] ata2.00: irq_stat 0x40000001
[ 50.466441] ata2.00: cmd e5/00:00:00:00:00/00:00:00:00:00/a0 tag 0
cdb 0x0 data 0
[ 50.466442] res 51/04:00:01:01:80/00:00:00:00:00/a0 Emask
0x1 (device error)
[ 50.481914] ata2.00: status: {DRDY ERR }
[ 50.485876] ata2.00: error: {ABRT }
[ 50.489533] ata2.00: configured for UDMA/133
[ 50.493839] ata2: EH complete
I've attached the entire dmesg and lspci.
Berck
[ 0.000000] Linux version 2.6.23-rc7-mm1 (root@luna) (gcc version 4.2.1 (Debian 4.2.1-5)) #1 SMP Mon Sep 24 10:55:28 MDT 2007
[ 0.000000] Command line: root=/dev/sde1 ro console=tty0 console=ttyS0,115200n8 BOOT_IMAGE=vmlinuz
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003ff80000 (usable)
[ 0.000000] BIOS-e820: 000000003ff80000 - 000000003ff8e000 (ACPI data)
[ 0.000000] BIOS-e820: 000000003ff8e000 - 000000003ffe0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003ffe0000 - 0000000040000000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
[ 0.000000] end_pfn_map = 1048576
[ 0.000000] DMI 2.4 present.
[ 0.000000] ACPI: RSDP 000FAF20, 0024 (r2 ACPIAM)
[ 0.000000] ACPI: XSDT 3FF80100, 0064 (r1 NEC 3000707 MSFT 97)
[ 0.000000] ACPI: FACP 3FF80290, 00F4 (r3 A_M_I_ OEMFACP 3000707 MSFT 97)
[ 0.000000] ACPI: DSDT 3FF80590, 9560 (r1 A0543 A0543000 0 INTL 20060113)
[ 0.000000] ACPI: FACS 3FF8E000, 0040
[ 0.000000] ACPI: APIC 3FF80390, 0080 (r1 A_M_I_ OEMAPIC 3000707 MSFT 97)
[ 0.000000] ACPI: SLIC 3FF80410, 0176 (r1 NEC 3000707 MSFT 97)
[ 0.000000] ACPI: OEMB 3FF8E040, 0066 (r1 A_M_I_ AMI_OEM 3000707 MSFT 97)
[ 0.000000] ACPI: HPET 3FF89AF0, 0038 (r1 A_M_I_ OEMHPET 3000707 MSFT 97)
[ 0.000000] ACPI: MCFG 3FF89B30, 003C (r1 A_M_I_ OEMMCFG 3000707 MSFT 97)
[ 0.000000] ACPI: SSDT 3FF8E0B0, 01C6 (r1 AMI CPU1PM 1 INTL 20060113)
[ 0.000000] ACPI: SSDT 3FF8E280, 013A (r1 AMI CPU2PM 1 INTL 20060113)
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] DMA32 4096 -> 1048576
[ 0.000000] Normal 1048576 -> 1048576
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0 -> 159
[ 0.000000] 0: 256 -> 262016
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 (Bootup-CPU)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] Processor #1
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] Setting APIC routing to flat
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:bfb00000)
[ 0.000000] .eh_frame_hdr for 'kernel' present but unusable
[ 0.000000] PERCPU: Allocating 28272 bytes of per cpu data
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 257189
[ 0.000000] Kernel command line: root=/dev/sde1 ro console=tty0 console=ttyS0,115200n8 BOOT_IMAGE=vmlinuz
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 0.000000] TSC calibrated against HPET
[ 0.000000] time.c: Detected 2564.904 MHz processor.
[ 0.006666] Console: colour VGA+ 80x25
[ 0.006666] console [tty0] enabled
[ 0.009999] console [ttyS0] enabled
[ 0.013333] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.016666] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.019999] Checking aperture...
[ 0.029999] Memory: 1026700k/1048064k available (2444k kernel code, 20788k reserved, 1587k data, 224k init)
[ 0.116666] Calibrating delay using timer specific routine.. 5165.06 BogoMIPS (lpj=8606508)
[ 0.123333] Mount-cache hash table entries: 256
[ 0.126666] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.133333] CPU: L2 cache: 2048K
[ 0.136666] using mwait in idle threads.
[ 0.139999] CPU: Physical Processor ID: 0
[ 0.143333] CPU: Processor Core ID: 0
[ 0.146666] CPU0: Thermal monitoring enabled (TM2)
[ 0.149999] Freeing SMP alternatives: 27k freed
[ 0.153333] ACPI: Core revision 20070126
[ 0.196666] Using local APIC timer interrupts.
[ 0.203333] Detected 22.900 MHz APIC timer.
[ 0.206666] Booting processor 1/2 APIC 0x1
[ 0.219999] Initializing CPU#1
[ 0.303333] Calibrating delay using timer specific routine.. 5131.59 BogoMIPS (lpj=8549752)
[ 0.303333] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.303333] CPU: L2 cache: 2048K
[ 0.303333] CPU: Physical Processor ID: 0
[ 0.303333] CPU: Processor Core ID: 1
[ 0.303333] CPU1: Thermal monitoring enabled (TM2)
[ 0.303333] Intel(R) Core(TM)2 CPU 6300 @ 1.86GHz stepping 06
[ 0.303333] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.306666] Brought up 2 CPUs
[ 0.309999] net_namespace: 112 bytes
[ 0.313527] NET: Registered protocol family 16
[ 0.318098] ACPI: bus type pci registered
[ 0.322196] PCI: Using configuration type 1
[ 0.337363] ACPI: Interpreter enabled
[ 0.341064] ACPI: Using IOAPIC for interrupt routing
[ 0.346103] PCI: MCFG configuration 0: base 4026531840 segment 0 buses 0 - 63
[ 0.355324] PCI: MCFG area at f0000000 reserved in ACPI motherboard resources
[ 0.363684] PCI: Using MMCONFIG at f0000000 - f3ffffff
[ 0.374737] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.380224] PCI quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
[ 0.386698] PCI quirk: region 0480-04bf claimed by ICH6 GPIO
[ 0.392990] PCI: Transparent bridge - 0000:00:1e.0
[ 0.400502] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.408218] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.415907] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[ 0.423599] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.431292] ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.438983] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.452232] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.459926] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.467612] ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] - 1B, should be 12 [20070126]
[ 0.477413] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 0.483126] pnp: PnP ACPI init
[ 0.486224] ACPI: bus type pnp registered
[ 0.492778] pnp: PnP ACPI: found 15 devices
[ 0.496997] ACPI: ACPI bus type pnp unregistered
[ 0.501785] SCSI subsystem initialized
[ 0.505640] PCI: Using ACPI for IRQ routing
[ 0.509868] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 0.531250] DMAR:No DMAR devices found
[ 0.535042] PCI-GART: No AMD northbridge found.
[ 0.539615] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.544701] hpet0: 3 64-bit timers, 14318180 Hz
[ 0.551248] Time: tsc clocksource has been installed.
[ 0.556341] Switched to high resolution mode on CPU 1
[ 0.556343] Switched to high resolution mode on CPU 0
[ 0.571333] pnp: 00:01: iomem range 0xfed13000-0xfed19fff has been reserved
[ 0.578331] pnp: 00:07: ioport range 0x290-0x297 has been reserved
[ 0.584545] pnp: 00:08: iomem range 0xfed1c000-0xfed1ffff has been reserved
[ 0.591541] pnp: 00:08: iomem range 0xfed20000-0xfed3ffff has been reserved
[ 0.598532] pnp: 00:08: iomem range 0xfed50000-0xfed8ffff has been reserved
[ 0.605530] pnp: 00:08: iomem range 0xffb00000-0xffbfffff could not be reserved
[ 0.612889] pnp: 00:0b: iomem range 0xfec00000-0xfec00fff has been reserved
[ 0.619883] pnp: 00:0b: iomem range 0xfee00000-0xfee00fff could not be reserved
[ 0.627240] pnp: 00:0d: iomem range 0xf0000000-0xf3ffffff has been reserved
[ 0.634542] pnp: 00:0e: iomem range 0x0-0x9ffff could not be reserved
[ 0.641015] pnp: 00:0e: iomem range 0xc0000-0xdffff has been reserved
[ 0.647486] pnp: 00:0e: iomem range 0xe0000-0xfffff could not be reserved
[ 0.654311] pnp: 00:0e: iomem range 0x100000-0x3fffffff could not be reserved
[ 0.661663] PCI: Bridge: 0000:00:01.0
[ 0.665362] IO window: disabled.
[ 0.668800] MEM window: faa00000-feafffff
[ 0.673018] PREFETCH window: cff00000-efefffff
[ 0.677669] PCI: Bridge: 0000:00:1c.0
[ 0.681366] IO window: disabled.
[ 0.684806] MEM window: disabled.
[ 0.688331] PREFETCH window: cfe00000-cfefffff
[ 0.692984] PCI: Bridge: 0000:00:1c.3
[ 0.696680] IO window: c000-cfff
[ 0.700121] MEM window: fa900000-fa9fffff
[ 0.704563] PREFETCH window: disabled.
[ 0.708522] PCI: Bridge: 0000:00:1c.5
[ 0.712219] IO window: b000-bfff
[ 0.715658] MEM window: fa800000-fa8fffff
[ 0.719877] PREFETCH window: disabled.
[ 0.723836] PCI: Bridge: 0000:00:1e.0
[ 0.727534] IO window: a000-afff
[ 0.730972] MEM window: fa600000-fa7fffff
[ 0.735191] PREFETCH window: 50000000-500fffff
[ 0.739848] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 0.747340] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 0.754836] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 19
[ 0.762328] ACPI: PCI Interrupt 0000:00:1c.5[B] -> GSI 17 (level, low) -> IRQ 17
[ 0.769846] NET: Registered protocol family 2
[ 0.804543] IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.811902] TCP established hash table entries: 131072 (order: 9, 3145728 bytes)
[ 0.820383] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.827598] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.834246] TCP reno registered
[ 0.845316] audit: initializing netlink socket (disabled)
[ 0.850764] audit(1190632860.800:1): initialized
[ 0.855576] Loading Reiser4. See www.namesys.com for a description of Reiser4.
[ 0.862927] io scheduler noop registered
[ 0.866898] io scheduler cfq registered (default)
[ 0.872541] assign_interrupt_mode Found MSI capability
[ 0.877810] assign_interrupt_mode Found MSI capability
[ 0.883115] assign_interrupt_mode Found MSI capability
[ 0.888389] assign_interrupt_mode Found MSI capability
[ 0.893748] input: Power Button (FF) as /class/input/input0
[ 0.899356] ACPI: Power Button (FF) [PWRF]
[ 0.903557] input: Power Button (CM) as /class/input/input1
[ 0.909168] ACPI: Power Button (CM) [PWRB]
[ 0.913523] ACPI Error (psparse-0537): Method parse/execution failed [\_PR_.CPU1._OSC] (Node ffff810002057b30), AE_ALREADY_EXISTS
[ 0.925353] ACPI: Marking method _OSC as Serialized
[ 0.930391] ACPI Error (psparse-0537): Method parse/execution failed [\_PR_.CPU1._PDC] (Node ffff810002057b50), AE_ALREADY_EXISTS
[ 0.942224] ACPI: Marking method _PDC as Serialized
[ 0.947450] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 0.953844] ACPI Error (psparse-0537): Method parse/execution failed [\_PR_.CPU2._OSC] (Node ffff810002057a10), AE_ALREADY_EXISTS
[ 0.965672] ACPI: Marking method _OSC as Serialized
[ 0.970699] ACPI Error (psparse-0537): Method parse/execution failed [\_PR_.CPU2._PDC] (Node ffff810002057a30), AE_ALREADY_EXISTS
[ 0.982528] ACPI: Marking method _PDC as Serialized
[ 0.987738] ACPI: Processor [CPU2] (supports 8 throttling states)
[ 1.021932] Real Time Clock Driver v1.12ac
[ 1.026559] intel_rng: FWH not detected
[ 1.030787] Linux agpgart interface v0.102
[ 1.034933] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
[ 1.042917] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.049287] 00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.055149] ACPI: PCI Interrupt 0000:01:01.0[A] -> GSI 22 (level, low) -> IRQ 22
[ 1.272646] scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 7.0
[ 1.272647] <Adaptec 2940 Ultra2 SCSI adapter>
[ 1.272648] aic7890/91: Ultra2 Wide Channel A, SCSI Id=7, 32/253 SCBs
[ 1.272649]
[ 1.293548] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 23 (level, low) -> IRQ 23
[ 1.553326] scsi 0:0:1:0: Direct-Access IBM-PCCO ST39102LC !# B219 PQ: 0 ANSI: 2
[ 1.561460] scsi0:A:1:0: Tagged Queuing enabled. Depth 8
[ 1.566937] target0:0:1: Beginning Domain Validation
[ 1.578463] target0:0:1: wide asynchronous
[ 1.587385] target0:0:1: FAST-40 WIDE SCSI 80.0 MB/s ST (25 ns, offset 15)
[ 1.598611] target0:0:1: Domain Validation skipping write tests
[ 1.604649] target0:0:1: Ending Domain Validation
[ 1.612484] scsi 0:0:2:0: Direct-Access SGI SEAGATE ST39102L 2702 PQ: 0 ANSI: 2
[ 1.620618] scsi0:A:2:0: Tagged Queuing enabled. Depth 8
[ 1.626103] target0:0:2: Beginning Domain Validation
[ 1.636479] target0:0:2: wide asynchronous
[ 1.644583] target0:0:2: FAST-40 WIDE SCSI 80.0 MB/s ST (25 ns, offset 15)
[ 1.654991] target0:0:2: Domain Validation skipping write tests
[ 1.661028] target0:0:2: Ending Domain Validation
[ 2.300362] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
[ 2.308492] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part
[ 2.315416] scsi1 : ahci
[ 2.318028] scsi2 : ahci
[ 2.320642] scsi3 : ahci
[ 2.323255] scsi4 : ahci
[ 2.325856] ata1: SATA max UDMA/133 abar m1024@0xfebfb800 port 0xfebfb900 irq 315
[ 2.333385] ata2: SATA max UDMA/133 abar m1024@0xfebfb800 port 0xfebfb980 irq 315
[ 2.340912] ata3: SATA max UDMA/133 abar m1024@0xfebfb800 port 0xfebfba00 irq 315
[ 2.348439] ata4: SATA max UDMA/133 abar m1024@0xfebfb800 port 0xfebfba80 irq 315
[ 2.826801] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.833846] ata1.00: ATA-7: ST3250823AS, 3.03, max UDMA/133
[ 2.839453] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 2.847130] ata1.00: configured for UDMA/133
[ 3.323209] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 4.741554] sd 0:0:1:0: [sda] 17774160 512-byte hardware sectors (9100 MB)
[ 4.750442] sd 0:0:1:0: [sda] Write Protect is off
[ 4.756848] sd 0:0:1:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA
[ 4.766232] sd 0:0:1:0: [sda] 17774160 512-byte hardware sectors (9100 MB)
[ 4.775123] sd 0:0:1:0: [sda] Write Protect is off
[ 4.781526] sd 0:0:1:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA
[ 4.790092] sda: sda1 sda2
[ 4.802219] sd 0:0:1:0: [sda] Attached SCSI disk
[ 4.806924] sd 0:0:1:0: Attached scsi generic sg0 type 0
[ 4.813108] sd 0:0:2:0: [sdb] 17781520 512-byte hardware sectors (9104 MB)
[ 4.823399] sd 0:0:2:0: [sdb] Write Protect is off
[ 4.831988] sd 0:0:2:0: [sdb] Write cache: enabled, read cache: enabled, supports DPO and FUA
[ 4.841348] sd 0:0:2:0: [sdb] 17781520 512-byte hardware sectors (9104 MB)
[ 4.851630] sd 0:0:2:0: [sdb] Write Protect is off
[ 4.860225] sd 0:0:2:0: [sdb] Write cache: enabled, read cache: enabled, supports DPO and FUA
[ 4.868792] sdb: sdb1
[ 4.878122] sd 0:0:2:0: [sdb] Attached SCSI disk
[ 4.882823] sd 0:0:2:0: Attached scsi generic sg1 type 0
[ 33.310882] ata2.00: qc timeout (cmd 0xec)
[ 33.315018] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x5)
[ 33.321147] ata2: failed to recover some devices, retrying in 5 secs
[ 43.812075] ata2: port is slow to respond, please be patient (Status 0x80)
[ 48.349713] ata2: COMRESET failed (errno=-16)
[ 49.039358] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 49.045635] ata2.00: ATA-6: Config Disk, RGL10364, max UDMA/133
[ 49.051677] ata2.00: 640 sectors, multi 1: LBA
[ 49.056321] ata2.00: configured for UDMA/133
[ 49.535758] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 49.545347] ata3.00: ATA-6: WDC WD360GD-00FLA2, 31.08F31, max UDMA/133
[ 49.551912] ata3.00: 72303840 sectors, multi 16: LBA48
[ 49.561558] ata3.00: configured for UDMA/133
[ 50.038845] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 50.195938] ata4.00: ATAPI: Optiarc DVD RW AD-7170S, 1.00, max UDMA/66
[ 50.355837] ata4.00: configured for UDMA/66
[ 50.360106] scsi 1:0:0:0: Direct-Access ATA ST3250823AS 3.03 PQ: 0 ANSI: 5
[ 50.368458] sd 1:0:0:0: [sdc] 488397168 512-byte hardware sectors (250059 MB)
[ 50.375639] sd 1:0:0:0: [sdc] Write Protect is off
[ 50.380477] sd 1:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 50.394582] sd 1:0:0:0: [sdc] 488397168 512-byte hardware sectors (250059 MB)
[ 50.401757] sd 1:0:0:0: [sdc] Write Protect is off
[ 50.406592] sd 1:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 50.415679] sdc: sdc1 sdc2
[ 50.437711] sd 1:0:0:0: [sdc] Attached SCSI disk
[ 50.442406] sd 1:0:0:0: Attached scsi generic sg2 type 0
[ 50.447800] scsi 2:0:0:0: Direct-Access ATA Config Disk RGL1 PQ: 0 ANSI: 5
[ 50.456012] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 50.462484] ata2.00: irq_stat 0x40000001
[ 50.466441] ata2.00: cmd e5/00:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0
[ 50.466442] res 51/04:00:01:01:80/00:00:00:00:00/a0 Emask 0x1 (device error)
[ 50.481914] ata2.00: status: {DRDY ERR }
[ 50.485876] ata2.00: error: {ABRT }
[ 50.489533] ata2.00: configured for UDMA/133
[ 50.493839] ata2: EH complete
[ 50.496875] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 50.503349] ata2.00: irq_stat 0x40000001
[ 50.507306] ata2.00: cmd e5/00:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0
[ 50.507307] res 51/04:00:01:01:80/00:00:00:00:00/a0 Emask 0x1 (device error)
[ 50.522778] ata2.00: status: {DRDY ERR }
[ 50.526740] ata2.00: error: {ABRT }
[ 50.530402] ata2.00: configured for UDMA/133
[ 50.534713] ata2: EH complete
[ 50.537730] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 50.544207] ata2.00: irq_stat 0x40000001
[ 50.548170] ata2.00: cmd e5/00:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0
[ 50.548171] res 51/04:00:01:01:80/00:00:00:00:00/a0 Emask 0x1 (device error)
[ 50.563644] ata2.00: status: {DRDY ERR }
[ 50.567606] ata2.00: error: {ABRT }
[ 50.571267] ata2.00: configured for UDMA/133
[ 50.575576] ata2: EH complete
[ 50.578597] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 50.585072] ata2.00: irq_stat 0x40000001
[ 50.589035] ata2.00: cmd e5/00:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0
[ 50.589036] res 51/04:00:01:01:80/00:00:00:00:00/a0 Emask 0x1 (device error)
[ 50.604509] ata2.00: status: {DRDY ERR }
[ 50.608470] ata2.00: error: {ABRT }
[ 50.612129] ata2.00: configured for UDMA/133
[ 50.616435] ata2: EH complete
[ 50.619461] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 50.625935] ata2.00: irq_stat 0x40000001
[ 50.629892] ata2.00: cmd e5/00:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0
[ 50.629893] res 51/04:00:01:01:80/00:00:00:00:00/a0 Emask 0x1 (device error)
[ 50.645365] ata2.00: status: {DRDY ERR }
[ 50.649327] ata2.00: error: {ABRT }
[ 50.652988] ata2.00: configured for UDMA/133
[ 50.657300] ata2: EH complete
[ 50.660327] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 50.666803] ata2.00: irq_stat 0x40000001
[ 50.670767] ata2.00: cmd e5/00:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0
[ 50.670767] res 51/04:00:01:01:80/00:00:00:00:00/a0 Emask 0x1 (device error)
[ 50.686239] ata2.00: status: {DRDY ERR }
[ 50.690201] ata2.00: error: {ABRT }
[ 50.693859] ata2.00: configured for UDMA/133
[ 50.698166] ata2: EH complete
[ 50.701200] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 50.707675] ata2.00: irq_stat 0x40000001
[ 50.711632] ata2.00: cmd e5/00:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0
[ 50.711633] res 51/04:00:01:01:80/00:00:00:00:00/a0 Emask 0x1 (device error)
[ 50.727104] ata2.00: status: {DRDY ERR }
[ 50.731066] ata2.00: error: {ABRT }
[ 50.734727] ata2.00: configured for UDMA/133
[ 50.739039] ata2: EH complete
[ 50.742076] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 50.748549] ata2.00: irq_stat 0x40000001
[ 50.752506] ata2.00: cmd e5/00:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0
[ 50.752507] res 51/04:00:01:01:80/00:00:00:00:00/a0 Emask 0x1 (device error)
[ 50.767979] ata2.00: status: {DRDY ERR }
[ 50.771940] ata2.00: error: {ABRT }
[ 50.775601] ata2.00: configured for UDMA/133
[ 50.779911] ata2: EH complete
[ 50.782940] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 50.789415] ata2.00: irq_stat 0x40000001
[ 50.793371] ata2.00: cmd e5/00:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0
[ 50.793372] res 51/04:00:01:01:80/00:00:00:00:00/a0 Emask 0x1 (device error)
[ 50.808843] ata2.00: status: {DRDY ERR }
[ 50.812805] ata2.00: error: {ABRT }
[ 50.816465] ata2.00: configured for UDMA/133
[ 50.820777] ata2: EH complete
[ 50.823806] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 50.830279] ata2.00: irq_stat 0x40000001
[ 50.834236] ata2.00: cmd e5/00:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0
[ 50.834237] res 51/04:00:01:01:80/00:00:00:00:00/a0 Emask 0x1 (device error)
[ 50.849709] ata2.00: status: {DRDY ERR }
[ 50.853671] ata2.00: error: {ABRT }
[ 50.857331] ata2.00: configured for UDMA/133
[ 50.861643] ata2: EH complete
[ 50.864669] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 50.871146] ata2.00: irq_stat 0x40000001
[ 50.875111] ata2.00: cmd e5/00:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0
[ 50.875112] res 51/04:00:01:01:80/00:00:00:00:00/a0 Emask 0x1 (device error)
[ 50.890593] ata2.00: status: {DRDY ERR }
[ 50.894555] ata2.00: error: {ABRT }
[ 50.898215] ata2.00: configured for UDMA/133
[ 50.902525] ata2: EH complete
[ 50.905552] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 50.912027] ata2.00: irq_stat 0x40000001
[ 50.915984] ata2.00: cmd e5/00:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0
[ 50.915985] res 51/04:00:01:01:80/00:00:00:00:00/a0 Emask 0x1 (device error)
[ 50.931456] ata2.00: status: {DRDY ERR }
[ 50.935422] ata2.00: error: {ABRT }
[ 50.939077] ata2.00: configured for UDMA/133
[ 50.943383] ata2: EH complete
[ 50.946419] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 50.952892] ata2.00: irq_stat 0x40000001
[ 50.956849] ata2.00: cmd e5/00:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0
[ 50.956850] res 51/04:00:01:01:80/00:00:00:00:00/a0 Emask 0x1 (device error)
[ 50.972324] ata2.00: status: {DRDY ERR }
[ 50.976286] ata2.00: error: {ABRT }
[ 50.979943] ata2.00: configured for UDMA/133
[ 50.984250] ata2: EH complete
[ 50.987274] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 50.993749] ata2.00: irq_stat 0x40000001
[ 50.997706] ata2.00: cmd e5/00:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0
[ 50.997707] res 51/04:00:01:01:80/00:00:00:00:00/a0 Emask 0x1 (device error)
[ 51.013178] ata2.00: status: {DRDY ERR }
[ 51.017140] ata2.00: error: {ABRT }
[ 51.020803] ata2.00: configured for UDMA/133
[ 51.025114] ata2: EH complete
[ 51.028138] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 51.034616] ata2.00: irq_stat 0x40000001
[ 51.038579] ata2.00: cmd e5/00:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0
[ 51.038580] res 51/04:00:01:01:80/00:00:00:00:00/a0 Emask 0x1 (device error)
[ 51.054055] ata2.00: status: {DRDY ERR }
[ 51.058014] ata2.00: error: {ABRT }
[ 51.061676] ata2.00: configured for UDMA/133
[ 51.065986] ata2: EH complete
[ 51.069003] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 51.075480] ata2.00: irq_stat 0x40000001
[ 51.079436] ata2.00: cmd e5/00:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0
[ 51.079437] res 51/04:00:01:01:80/00:00:00:00:00/a0 Emask 0x1 (device error)
[ 51.094911] ata2.00: status: {DRDY ERR }
[ 51.098873] ata2.00: error: {ABRT }
[ 51.107774] ata2.00: configured for UDMA/133
[ 51.112083] ata2: EH complete
[ 51.115110] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 51.121586] ata2.00: irq_stat 0x40000001
[ 51.125542] ata2.00: cmd e5/00:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0
[ 51.125543] res 51/04:00:01:01:80/00:00:00:00:00/a0 Emask 0x1 (device error)
[ 51.141014] ata2.00: status: {DRDY ERR }
[ 51.144976] ata2.00: error: {ABRT }
[ 51.148636] ata2.00: configured for UDMA/133
[ 51.152948] ata2: EH complete
[ 51.155975] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 51.162451] ata2.00: irq_stat 0x40000001
[ 51.166408] ata2.00: cmd e5/00:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0
[ 51.166409] res 51/04:00:01:01:80/00:00:00:00:00/a0 Emask 0x1 (device error)
[ 51.181880] ata2.00: status: {DRDYisk...<3>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 51.206841] ata2.00: irq_stat 0x40000001
[ 51.210799]51/04:00:01:01:80/00:00:00:00:00/a0 Emask 0x1 (device error)
[ 51.226279] ata2.00: status: {DRDY ERR }
[ 51.230243] ata2.te
[ 51.241247] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 51.247725] ata2.00: irq_stat 0x40000001
[ res 51/04:00:01:01:80/00:00:00:00:00/a0 Emask 0x1 (device error)
[ 51.267215] ata2.00: status: {DRDY ERR }
[ 51.27rq_stat 0x40000001
[ 51.292599] ata2.00: cmd 40/00:01:00:00:00/00:00:00:00:00/e0 tag 0 cdb 0x0 data 0
[ 51.292600] {DRDY ERR }
[ 51.312043] ata2.00: error: {ABRT }
[ 51.315700] ata2.00: configured for UDMA/133
[ 51.320005] ata2: EH cata2.00: irq_stat 0x40000001
[ 51.333471] ata2.00: cmd 40/00:01:00:00:00/00:00:00:00:00/e0 tag 0 cdb 0x0 data 0
[ 51.3330: status: {DRDY ERR }
[ 51.352906] ata2.00: error: {ABRT }
[ 51.356564] ata2.00: configured for UDMA/133
[ 51.360869]0x0 data 0
[ 51.374339] res 51/04:00:01:01:80/00:00:00:00:00/a0 Emask 0x1 (device error)
[ 51.389818] ata2.00: status: {DRDY ERR }
[ 51.393783] ata2.00: error: {ABRT }
[ 51.397442] ata2.00: configured for UDMA/133
[ 51.401752] at tag 0 cdb 0x0 data 0
[ 51.415213] res 51/04:00:01:01:80/00:00:00:00:00/a0 Emask 0x1 (device error)
[ 51.430692igured for UDMA/133
[ 51.442627] ata2: EH complete
[ 52.444246] .<3>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 52.451137] ata2.00: irq_stat 0x40000001
[ 52.455104] ata2.00: cmd e5/00:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0
[ 52.455105] res 51/04:00:01:01:80/00:00:00:00:00/a0 Emask 0x1 (device error)
[ 52.470583] ata2.00: status: {DRDY ERR }
[ 52.474545] ata2.00: error: {ABRT }
[ 52.478205] ata2.00: configured for UDMA/133
[ 52.482515] ata2: EH complete
[ 52.485535] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 52.492011] ata2.00: irq_stat 0x40000001
[ 52.495967] ata2.00: cmd e5/00:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0
[ 52.495968] res 51/04:00:01:01:80/00:00:00:00:00/a0 Emask 0x1 (device error)
[ 52.511440] ata2.00: status: {DRDY ERR }
[ 52.515401] ata2.00: error: {ABRT }
[ 52.519059] ata2.00: configured for UDMA/133
[ 52.523365] ata2: EH complete
[ 52.526382] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 52.532859] ata2.00: irq_stat 0x40000001
[ 52.536823] ata2.00: cmd e5/00:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0
[ 52.536824] res 51/04:00:01:01:80/00:00:00:00:00/a0 Emask 0x1 (device error)
[ 52.552298] ata2.00: status: {DRDY ERR }
[ 52.556259] ata2.00: error: {ABRT }
[ 52.559916] ata2.00: configured for UDMA/133
[ 52.564221] ata2: EH complete
[ 52.567246] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 52.573724] ata2.00: irq_stat 0x40000001
[ 52.577681] ata2.00: cmd e5/00:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0
[ 52.577682] res 51/04:00:01:01:80/00:00:00:00:00/a0 Emask 0x1 (device error)
[ 52.593153] ata2.00: status: {DRDY ERR }
[ 52.597114] ata2.00: error: {ABRT }
[ 52.600772] ata2.00: configured for UDMA/133
[ 52.605078] ata2: EH complete
[ 52.608102] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 52.614580] ata2.00: irq_stat 0x40000001
[ 52.618537] ata2.00: cmd e5/00:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0
[ 52.618538] res 51/04:00:01:01:80/00:00:00:00:00/a0 Emask 0x1 (device error)
[ 52.634020] ata2.00: status: {DRDY ERR }
[ 52.637982] ata2.00: error: {ABRT }
[ 52.641636] ata2.00: configured for UDMA/133
[ 52.645944] ata2: EH complete
[ 52.648969] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 52.655449] ata2.00: irq_stat 0x40000001
[ 52.659410] ata2.00: cmd e5/00:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0
[ 52.659411] res 51/04:00:01:01:80/00:00:00:00:00/a0 Emask 0x1 (device error)
[ 52.674883] ata2.00: status: {DRDY ERR }
[ 52.678848] ata2.00: error: {ABRT }
[ 52.682504] ata2.00: configured for UDMA/133
[ 52.686808] ata2: EH complete
[ 52.689833] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 52.696311] ata2.00: irq_stat 0x40000001
[ 52.700267] ata2.00: cmd e5/00:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0
[ 52.700268] res 51/04:00:01:01:80/00:00:00:00:00/a0 Emask 0x1 (device error)
[ 52.715740] ata2.00: status: {DRDY ERR }
[ 52.719702] ata2.00: error: {ABRT }
[ 52.723361] ata2.00: configured for UDMA/133
[ 52.727664] ata2: EH complete
[ 52.730681] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 52.737158] ata2.00: irq_stat 0x40000001
[ 52.741117] ata2.00: cmd e5/00:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0
[ 52.741118] res 51/04:00:01:01:80/00:00:00:00:00/a0 Emask 0x1 (device error)
[ 52.756596] ata2.00: status: {DRDY ERR }
[ 52.760558] ata2.00: error: {ABRT }
[ 52.764216] ata2.00: configured for UDMA/133
[ 52.768521] ata2: EH complete
[ 52.771548] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 52.778023] ata2.00: irq_stat 0x40000001
[ 52.781982] ata2.00: cmd e5/00:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0
[ 52.781983] res 51/04:00:01:01:80/00:00:00:00:00/a0 Emask 0x1 (device error)
[ 52.797462] ata2.00: status: {DRDY ERR }
[ 52.801426] ata2.00: error: {ABRT }
[ 52.805082] ata2.00: configured for UDMA/133
[ 52.809388] ata2: EH complete
[ 52.812404] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 52.818881] ata2.00: irq_stat 0x40000001
[ 52.822838] ata2.00: cmd e5/00:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0
[ 52.822838] res 51/04:00:01:01:80/00:00:00:00:00/a0 Emask 0x1 (device error)
[ 52.838312] ata2.00: status: {DRDY ERR }
[ 52.847525] ata2.00: error: {ABRT }
[ 52.851178] ata2.00: configured for UDMA/133
[ 52.855485] ata2: EH complete
[ 52.858509] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 52.864987] ata2.00: irq_stat 0x40000001
[ 52.868952] ata2.00: cmd e5/00:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0
[ 52.868953] res 51/04:00:01:01:80/00:00:00:00:00/a0 Emask 0x1 (device error)
[ 52.884425] ata2.00: status: {DRDY ERR }
[ 52.888386] ata2.00: error: {ABRT }
[ 53.407845] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x40)
[ 53.414063] ata2.00: revalidation failed (errno=-5)
[ 53.418979] ata2: failed to recover some devices, retrying in 5 secs
[ 60.626658] ata2: soft resetting link
[ 60.630361] ata2: SATA link down (SStatus 21 SControl 300)
[ 60.635882] ata2: limiting SATA link speed to 1.5 Gbps
[ 60.641058] ata2.00: limiting speed to UDMA/133:PIO3
[ 60.646056] ata2: failed to recover some devices, retrying in 5 secs
[ 65.650696] ata2: hard resetting link
[ 66.340351] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 66.346707] ata2.00: configured for UDMA/133
[ 66.351020] ata2: exception Emask 0x10 SAct 0x0 SErr 0x4010000 action 0x3 t4
[ 66.358104] ata2: irq_stat 0x00000040, connection status changed
[ 66.364148] ata2: SError: {PHYRdyChg DevExch }
[ 67.079963] ata2: soft resetting link
[ 67.243206] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 97.230928] ata2.00: qc timeout (cmd 0xec)
[ 97.235060] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x5)
[ 97.241183] ata2.00: revalidation failed (errno=-5)
[ 97.246095] ata2: failed to recover some devices, retrying in 5 secs
[ 102.251646] ata2: hard resetting link
[ 107.738811] ata2: port is slow to respond, please be patient (Status 0x80)
[ 112.276434] ata2: COMRESET failed (errno=-16)
[ 112.280831] ata2: hard resetting link
[ 112.969410] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 112.975769] ata2.00: configured for UDMA/133
[ 112.980083] ata2: EH complete
[ 112.983116] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 112.989592] ata2.00: irq_stat 0x40000001
[ 112.993550] ata2.00: cmd e5/00:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0
[ 112.993551] res 51/04:00:01:01:80/00:00:00:00:00/a0 Emask 0x1 (device error)
[ 113.009030] ata2.00: status: {DRDY ERR }
[ 113.012991] ata2.00: error: {ABRT }
[ 113.016656] ata2.00: configured for UDMA/133
[ 113.020963] ata2: EH complete
[ 113.023988] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 113.030465] ata2.00: irq_stat 0x40000001
[ 113.034424] ata2.00: cmd e5/00:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0
[ 113.034425] res 51/04:00:01:01:80/00:00:00:00:00/a0 Emask 0x1 (device error)
[ 113.049905] ata2.00: status: {DRDY ERR }
[ 113.053868] ata2.00: error: {ABRT }
[ 113.057528] ata2.00: configured for UDMA/133
[ 113.061836] ata2: EH complete
[ 113.064863] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 113.071341] ata2.00: irq_stat 0x40000001
[ 113.075304] ata2.00: cmd e5/00:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0
[ 113.075305] res 51/04:00:01:01:80/00:00:00:00:00/a0 Emask 0x1 (device error)
[ 113.090778] ata2.00: status: {DRDY ERR }
[ 113.094739] ata2.00: error: {ABRT }
[ 113.098402] ata2.00: configured for UDMA/133
[ 113.102710] ata2: EH complete
[ 113.105734] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 113.112205] ata2.00: irq_stat 0x40000001
[ 113.116163] ata2.00: cmd e5/00:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0
[ 113.116164] res 51/04:00:01:01:80/00:00:00:00:00/a0 Emask 0x1 (device error)
[ 113.131643] ata2.00: status: {DRDY ERR }
[ 113.135604] ata2.00: error: {ABRT }
[ 113.139267] ata2.00: configured for UDMA/133
[ 113.143575] ata2: EH complete
[ 113.146601] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 113.153080] ata2.00: irq_stat 0x40000001
[ 113.157044] ata2.00: cmd e5/00:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0
[ 113.157044] res 51/04:00:01:01:80/00:00:00:00:00/a0 Emask 0x1 (device error)
[ 113.172516] ata2.00: status: {DRDY ERR }
[ 113.176481] ata2.00: error: {ABRT }
[ 113.180143] ata2.00: configured for UDMA/133
[ 113.184450] ata2: EH complete
[ 113.187478] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 113.193953] ata2.00: irq_stat 0x40000001
[ 113.197909] ata2.00: cmd e5/00:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0
[ 113.197910] res 51/04:00:01:01:80/00:00:00:00:00/a0 Emask 0x1 (device error)
[ 113.213382] ata2.00: status: {DRDY ERR }
[ 113.217346] ata2.00: error: {ABRT }
[ 113.221007] ata2.00: configured for UDMA/133
[ 113.225315] ata2: EH complete
[ 113.228342] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 113.234819] ata2.00: irq_stat 0x40000001
[ 113.238784] ata2.00: cmd e5/00:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0
[ 113.238785] res 51/04:00:01:01:80/00:00:00:00:00/a0 Emask 0x1 (device error)
[ 113.254256] ata2.00: status: {DRDY ERR }
[ 113.258218] ata2.00: error: {ABRT }
[ 113.261881] ata2.00: configured for UDMA/133
[ 113.266190] ata2: EH complete
[ 114.265394] .<3>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 114.272286] ata2.00: irq_stat 0x40000001
[ 114.276250] ata2.00: cmd e5/00:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0
[ 114.276251] res 51/04:00:01:01:80/00:00:00:00:00/a0 Emask 0x1 (device error)
[ 114.291722] ata2.00: status: {DRDY ERR }
[ 114.295684] ata2.00: error: {ABRT }
[ 114.299348] ata2.00: configured for UDMA/133
[ 114.303656] ata2: EH complete
[ 114.306681] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 114.313159] ata2.00: irq_stat 0x40000001
[ 114.317122] ata2.00: cmd e5/00:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0
[ 114.317123] res 51/04:00:01:01:80/00:00:00:00:00/a0 Emask 0x1 (device error)
[ 114.332596] ata2.00: status: {DRDY ERR }
[ 114.336558] ata2.00: error: {ABRT }
[ 114.340222] ata2.00: configured for UDMA/133
[ 114.344528] ata2: EH complete
[ 114.347555] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 114.354033] ata2.00: irq_stat 0x40000001
[ 114.357997] ata2.00: cmd e5/00:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0
[ 114.357998] res 51/04:00:01:01:80/00:00:00:00:00/a0 Emask 0x1 (device error)
[ 114.373470] ata2.00: status: {DRDY ERR }
[ 114.377431] ata2.00: error: {ABRT }
[ 114.381094] ata2.00: configured for UDMA/133
[ 114.385402] ata2: EH complete
[ 114.388427] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 114.394897] ata2.00: irq_stat 0x40000001
[ 114.398854] ata2.00: cmd e5/00:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0
[ 114.398855] res 51/04:00:01:01:80/00:00:00:00:00/a0 Emask 0x1 (device error)
[ 114.414327] ata2.00: status: {DRDY ERR }
[ 114.418288] ata2.00: error: {ABRT }
[ 114.421951] ata2.00: configured for UDMA/133
[ 114.426259] ata2: EH complete
[ 114.429285] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 114.435762] ata2.00: irq_stat 0x40000001
[ 114.439720] ata2.00: cmd e5/00:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0
[ 114.439721] res 51/04:00:01:01:80/00:00:00:00:00/a0 Emask 0x1 (device error)
[ 114.455202] ata2.00: status: {DRDY ERR }
[ 114.459164] ata2.00: error: {ABRT }
[ 114.462827] ata2.00: configured for UDMA/133
[ 114.467133] ata2: EH complete
[ 114.470161] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 114.476636] ata2.00: irq_stat 0x40000001
[ 114.480593] ata2.00: cmd e5/00:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0
[ 114.480594] res 51/04:00:01:01:80/00:00:00:00:00/a0 Emask 0x1 (device error)
[ 114.496066] ata2.00: status: {DRDY ERR }
[ 114.500028] ata2.00: error: {ABRT }
[ 114.503691] ata2.00: configured for UDMA/133
[ 114.508000] ata2: EH complete
[ 114.511025] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 114.517502] ata2.00: irq_stat 0x40000001
[ 114.521458] ata2.00: cmd e5/00:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0
[ 114.521459] res 51/04:00:01:01:80/00:00:00:00:00/a0 Emask 0x1 (device error)
[ 114.536931] ata2.00: status: {DRDY ERR }
[ 114.540892] ata2.00: error: {ABRT }
[ 114.544557] ata2.00: configured for UDMA/133
[ 114.548865] ata2: EH complete
[ 114.551887] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 114.558358] ata2.00: irq_stat 0x40000001
[ 114.567565] ata2.00: cmd e5/00:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0
[ 114.567566] res 51/04:00:01:01:80/00:00:00:00:00/a0 Emask 0x1 (device error)
[ 114.583045] ata2.00: status: {DRDY ERR }
[ 114.587008] ata2.00: error: {ABRT }
[ 114.590669] ata2.00: configured for UDMA/133
[ 114.594979] ata2: EH complete
[ 114.598004] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 114.604482] ata2.00: irq_stat 0x40000001
[ 114.608445] ata2.00: cmd e5/00:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0
[ 114.608446] res 51/04:00:01:01:80/00:00:00:00:00/a0 Emask 0x1 (device error)
[ 114.623920] ata2.00: status: {DRDY ERR }
[ 114.627882] ata2.00: error: {ABRT }
[ 114.631544] ata2.00: configured for UDMA/133
[ 114.635852] ata2: EH complete
[ 114.638878] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 114.645354] ata2.00: irq_stat 0x40000001
[ 114.649313] ata2.00: cmd e5/00:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0
[ 114.649314] res 51/04:00:01:01:80/00:00:00:00:00/a0 Emask 0x1 (device error)
[ 114.664794] ata2.00: status: {DRDY ERR }
[ 114.668756] ata2.00: error: {ABRT }
[ 114.672418] ata2.00: configured for UDMA/133
[ 114.676728] ata2: EH complete
[ 114.679753] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 114.686228] ata2.00: irq_stat 0x40000001
[ 114.690185] ata2.00: cmd e5/00:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0
[ 114.690186] res 51/04:00:01:01:80/00:00:00:00:00/a0 Emask 0x1 (device error)
[ 114.705660] ata2.00: status: {DRDY ERR }
[ 114.709621] ata2.00: error: {ABRT }
[ 114.713282] ata2.00: configured for UDMA/133
[ 114.717593] ata2: EH complete
[ 114.720617] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 114.727094] ata2.00: irq_stat 0x40000001
[ 114.731050] ata2.00: cmd e5/00:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0
[ 114.731051] res 51/04:00:01:01:80/00:00:00:00:00/a0 Emask 0x1 (device error)
[ 114.746524] ata2.00: status: {DRDY ERR }
[ 114.750485] ata2.00: error: {ABRT }
[ 114.754148] ata2.00: configured for UDMA/133
[ 114.758458] ata2: EH complete
[ 114.761482] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 114.767959] ata2.00: irq_stat 0x40000001
[ 114.771916] ata2.00: cmd e5/00:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0
[ 114.771917] res 51/04:00:01:01:80/00:00:00:00:00/a0 Emask 0x1 (device error)
[ 114.787389] ata2.00: status: {DRDY ERR }
[ 114.791350] ata2.00: error: {ABRT }
[ 114.795013] ata2.00: configured for UDMA/133
[ 114.799321] ata2: EH complete
[ 114.802347] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 114.808825] ata2.00: irq_stat 0x40000001
[ 114.812782] ata2.00: cmd e5/00:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0
[ 114.812782] res 51/04:00:01:01:80/00:00:00:00:00/a0 Emask 0x1 (device error)
[ 114.828254] ata2.00: status: {DRDY ERR }
[ 114.832216] ata2.00: error: {ABRT }
[ 114.835881] ata2.00: configured for UDMA/133
[ 114.840186] ata2: EH complete
[ 114.843214] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 114.849691] ata2.00: irq_stat 0x40000001
[ 114.853655] ata2.00: cmd e5/00:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0
[ 114.853656] res 51/04:00:01:01:80/00:00:00:00:00/a0 Emask 0x1 (device error)
[ 114.869128] ata2.00: status: {DRDY ERR }
[ 114.873090] ata2.00: error: {ABRT }
[ 114.876753] ata2.00: configured for UDMA/133
[ 114.881061] ata2: EH complete
[ 114.884087] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 114.890563] ata2.00: irq_stat 0x40000001
[ 114.894520] ata2.00: cmd e5/00:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0
[ 114.894521] res 51/04:00:01:01:80/00:00:00:00:00/a0 Emask 0x1 (device error)
[ 114.909996] ata2.00: status: {DRDY ERR }
[ 114.913956] ata2.00: error: {ABRT }
[ 114.917619] ata2.00: configured for UDMA/133
[ 114.921926] ata2: EH complete
[ 114.924951] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 114.931430] ata2.00: irq_stat 0x40000001
[ 114.935396] ata2.00: cmd e5/00:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0
[ 114.935397] res 51/04:00:01:01:80/00:00:00:00:00/a0 Emask 0x1 (device error)
[ 114.950878] ata2.00: status: {DRDY ERR }
[ 114.954837] ata2.00: error: {ABRT }
[ 114.958502] ata2.00: configured for UDMA/133
[ 114.962810] ata2: EH complete
[ 114.965833] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 114.972311] ata2.00: irq_stat 0x40000001
[ 114.976270] ata2.00: cmd e5/00:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0
[ 114.976271] res 51/04:00:01:01:80/00:00:00:00:00/a0 Emask 0x1 (device error)
[ 114.991750] ata2.00: status: {DRDY ERR }
[ 114.995712] ata2.00: error: {ABRT }
[ 114.999374] ata2.00: configured for UDMA/133
[ 115.003683] ata2: EH complete
[ 116.004497] .<3>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 116.011400] ata2.00: irq_stat 0x40000001
[ 116.015364] ata2.00: cmd e5/00:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0
[ 116.015365] res 51/04:00:01:01:80/00:00:00:00:00/a0 Emask 0x1 (device error)
[ 116.030844] ata2.00: status: {DRDY ERR }
[ 116.034808] ata2.00: error: {ABRT }
[ 116.038467] ata2.00: configured for UDMA/133
[ 116.042777] ata2: EH complete
[ 116.045804] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 116.052280] ata2.00: irq_stat 0x40000001
[ 116.056236] ata2.00: cmd e5/00:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0
[ 116.056237] res 51/04:00:01:01:80/00:00:00:00:00/a0 Emask 0x1 (device error)
[ 116.071709] ata2.00: status: {DRDY ERR }
[ 116.075672] ata2.00: error: {ABRT }
[ 116.079334] ata2.00: configured for UDMA/133
[ 116.083642] ata2: EH complete
[ 116.086669] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 116.093146] ata2.00: irq_stat 0x40000001
[ 116.097110] ata2.00: cmd e5/00:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0
[ 116.097111] res 51/04:00:01:01:80/00:00:00:00:00/a0 Emask 0x1 (device error)
[ 116.112585] ata2.00: status: {DRDY ERR }
[ 116.116547] ata2.00: error: {ABRT }
[ 116.120208] ata2.00: configured for UDMA/133
[ 116.124515] ata2: EH complete
[ 116.127539] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 116.134011] ata2.00: irq_stat 0x40000001
[ 116.137977] ata2.00: cmd e5/00:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0
[ 116.137978] res 51/04:00:01:01:80/00:00:00:00:00/a0 Emask 0x1 (device error)
[ 116.153459] ata2.00: status: {DRDY ERR }
[ 116.157420] ata2.00: error: {ABRT }
[ 116.161082] ata2.00: configured for UDMA/133
[ 116.165390] ata2: EH complete
[ 116.168416] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 116.174894] ata2.00: irq_stat 0x40000001
[ 116.178858] ata2.00: cmd e5/00:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0
[ 116.178859] res 51/04:00:01:01:80/00:00:00:00:00/a0 Emask 0x1 (device error)
[ 116.194333] ata2.00: status: {DRDY ERR }
[ 116.198294] ata2.00: error: {ABRT }
[ 116.201957] ata2.00: configured for UDMA/133
[ 116.206265] ata2: EH complete
[ 116.209290] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 116.215768] ata2.00: irq_stat 0x40000001
[ 116.219734] ata2.00: cmd e5/00:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0
[ 116.219734] res 51/04:00:01:01:80/00:00:00:00:00/a0 Emask 0x1 (device error)
[ 116.235214] ata2.00: status: {DRDY ERR }
[ 116.239175] ata2.00: error: {ABRT }
[ 116.242839] ata2.00: configured for UDMA/133
[ 116.247147] ata2: EH complete
[ 116.250171] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 116.256651] ata2.00: irq_stat 0x40000001
[ 116.260616] ata2.00: cmd e5/00:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0
[ 116.260617] res 51/04:00:01:01:80/00:00:00:00:00/a0 Emask 0x1 (device error)
[ 116.276096] ata2.00: status: {DRDY ERR }
[ 116.280058] ata2.00: error: {ABRT }
[ 116.283720] ata2.00: configured for UDMA/133
[ 116.288031] ata2: EH complete
[ 116.291055] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 116.297531] ata2.00: irq_stat 0x40000001
[ 116.306735] ata2.00: cmd e5/00:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0
[ 116.306736] res 51/04:00:01:01:80/00:00:00:00:00/a0 Emask 0x1 (device error)
[ 116.322212] ata2.00: status: {DRDY ERR }
[ 116.326172] ata2.00: error: {ABRT }
[ 116.329835] ata2.00: configured for UDMA/133
[ 116.334145] ata2: EH complete
[ 116.337165] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 116.343637] ata2.00: irq_stat 0x40000001
[ 116.347596] ata2.00: cmd e5/00:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0
[ 116.347597] res 51/04:00:01:01:80/00:00:00:00:00/a0 Emask 0x1 (device error)
[ 116.363077] ata2.00: status: {DRDY ERR }
[ 116.367039] ata2.00: error: {ABRT }
[ 116.370700] ata2.00: configured for UDMA/133
[ 116.375008] ata2: EH complete
[ 116.378036] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 116.384511] ata2.00: irq_stat 0x40000001
[ 116.388468] ata2.00: cmd e5/00:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0
[ 116.388469] res 51/04:00:01:01:80/00:00:00:00:00/a0 Emask 0x1 (device error)
[ 116.403941] ata2.00: status: {DRDY ERR }
[ 116.407903] ata2.00: error: {ABRT }
[ 116.411568] ata2.00: configured for UDMA/133
[ 116.415874] ata2: EH complete
[ 116.418902] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 116.425377] ata2.00: irq_stat 0x40000001
[ 116.429334] ata2.00: cmd e5/00:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0
[ 116.429334] res 51/04:00:01:01:80/00:00:00:00:00/a0 Emask 0x1 (device error)
[ 116.444806] ata2.00: status: {DRDY ERR }
[ 116.448770] ata2.00: error: {ABRT }
[ 116.452431] ata2.00: configured for UDMA/133
[ 116.456739] ata2: EH complete
[ 116.459766] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 116.466245] ata2.00: irq_stat 0x40000001
[ 116.470208] ata2.00: cmd e5/00:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0
[ 116.470209] res 51/04:00:01:01:80/00:00:00:00:00/a0 Emask 0x1 (device error)
[ 116.485681] ata2.00: status: {DRDY ERR }
[ 116.489642] ata2.00: error: {ABRT }
[ 117.009101] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x40)
[ 117.015318] ata2.00: revalidation failed (errno=-5)
[ 117.020235] ata2: failed to recover some devices, retrying in 5 secs
[ 124.226882] ata2: soft resetting link
[ 124.230588] ata2: SATA link down (SStatus 11 SControl 310)
[ 124.236116] ata2.00: limiting speed to UDMA/133:PIO2
[ 124.241118] ata2: failed to recover some devices, retrying in 5 secs
[ 129.247593] ata2: hard resetting link
[ 129.937244] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 129.943597] ata2.00: configured for UDMA/133
[ 129.947910] ata2: exception Emask 0x10 SAct 0x0 SErr 0x4010000 action 0x3 t4
[ 129.954993] ata2: irq_stat 0x00000040, connection status changed
[ 129.961030] ata2: SError: {PHYRdyChg DevExch }
[ 130.676856] ata2: soft resetting link
[ 130.840099] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 160.827820] ata2.00: qc timeout (cmd 0xec)
[ 160.831960] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x5)
[ 160.838083] ata2.00: revalidation failed (errno=-5)
[ 160.842992] ata2: failed to recover some devices, retrying in 5 secs
[ 165.848538] ata2: hard resetting link
[ 171.335704] ata2: port is slow to respond, please be patient (Status 0x80)
[ 175.873327] ata2: COMRESET failed (errno=-16)
[ 175.877722] ata2: hard resetting link
[ 176.566303] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 176.572661] ata2.00: configured for UDMA/133
[ 176.576975] ata2: EH complete
[ 176.580007] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 176.586484] ata2.00: irq_stat 0x40000001
[ 176.590448] ata2.00: cmd e5/00:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0
[ 176.590449] res 51/04:00:01:01:80/00:00:00:00:00/a0 Emask 0x1 (device error)
[ 176.605920] ata2.00: status: {DRDY ERR }
[ 176.609882] ata2.00: error: {ABRT }
[ 176.613546] ata2.00: configured for UDMA/133
[ 176.617853] ata2: EH complete
[ 176.620880] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 176.627355] ata2.00: irq_stat 0x40000001
[ 176.631312] ata2.00: cmd e5/00:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0
[ 176.631313] res 51/04:00:01:01:80/00:00:00:00:00/a0 Emask 0x1 (device error)
[ 176.646785] ata2.00: status: {DRDY ERR }
[ 176.650747] ata2.00: error: {ABRT }
[ 176.654413] ata2.00: configured for UDMA/133
[ 176.658718] ata2: EH complete
[ 176.661746] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 176.668221] ata2.00: irq_stat 0x40000001
[ 176.672178] ata2.00: cmd e5/00:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0
[ 176.672179] res 51/04:00:01:01:80/00:00:00:00:00/a0 Emask 0x1 (device error)
[ 176.687659] ata2.00: status: {DRDY ERR }
[ 176.691621] ata2.00: error: {ABRT }
[ 176.695285] ata2.00: configured for UDMA/133
[ 176.699592] ata2: EH complete
[ 176.702616] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 176.709087] ata2.00: irq_stat 0x40000001
[ 176.713043] ata2.00: cmd e5/00:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0
[ 176.713044] res 51/04:00:01:01:80/00:00:00:00:00/a0 Emask 0x1 (device error)
[ 176.728518] ata2.00: status: {DRDY ERR }
[ 176.732480] ata2.00: error: {ABRT }
[ 176.736140] ata2.00: configured for UDMA/133
[ 176.740451] ata2: EH complete
[ 176.743474] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 176.749952] ata2.00: irq_stat 0x40000001
[ 176.753909] ata2.00: cmd e5/00:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0
[ 176.753910] res 51/04:00:01:01:80/00:00:00:00:00/a0 Emask 0x1 (device error)
[ 176.769381] ata2.00: status: {DRDY ERR }
[ 176.773343] ata2.00: error: {ABRT }
[ 176.777010] ata2.00: configured for UDMA/133
[ 176.781315] ata2: EH complete
[ 176.784342] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 176.790817] ata2.00: irq_stat 0x40000001
[ 176.794774] ata2.00: cmd e5/00:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0
[ 176.794775] res 51/04:00:01:01:80/00:00:00:00:00/a0 Emask 0x1 (device error)
[ 176.810247] ata2.00: status: {DRDY ERR }
[ 176.814208] ata2.00: error: {ABRT }
[ 176.817872] ata2.00: configured for UDMA/133
[ 176.822181] ata2: EH complete
[ 177.822305] .not responding...
[ 177.825454] sd 2:0:0:0: [sdd] 640 512-byte hardware sectors (0 MB)
[ 177.831678] sd 2:0:0:0: [sdd] Write Protect is off
[ 177.836514] sd 2:0:0:0: [sdd] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 177.845727] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 177.852200] ata2.00: irq_stat 0x40000001
[ 177.856164] ata2.00: cmd e5/00:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0
[ 177.856164] res 51/04:00:01:01:80/00:00:00:00:00/a0 Emask 0x1 (device error)
[ 177.871636] ata2.00: status: {DRDY ERR }
[ 177.875598] ata2.00: error: {ABRT }
[ 177.879263] ata2.00: configured for UDMA/133
[ 177.883569] ata2: EH complete
[ 177.886594] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 177.893071] ata2.00: irq_stat 0x40000001
[ 177.897028] ata2.00: cmd e5/00:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0
[ 177.897028] res 51/04:00:01:01:80/00:00:00:00:00/a0 Emask 0x1 (device error)
[ 177.912501] ata2.00: status: {DRDY ERR }
[ 177.916464] ata2.00: error: {ABRT }
[ 177.920125] ata2.00: configured for UDMA/133
[ 177.924433] ata2: EH complete
[ 177.927460] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 177.933938] ata2.00: irq_stat 0x40000001
[ 177.937904] ata2.00: cmd e5/00:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0
[ 177.937905] res 51/04:00:01:01:80/00:00:00:00:00/a0 Emask 0x1 (device error)
[ 177.953431] ata2.00: status: {DRDY ERR }
[ 177.957388] ata2.00: error: {ABRT }
[ 177.961052] ata2.00: configured for UDMA/133
[ 177.965360] ata2: EH complete
[ 177.968386] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 177.974864] ata2.00: irq_stat 0x40000001
[ 177.978830] ata2.00: cmd e5/00:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0
[ 177.978830] res 51/04:00:01:01:80/00:00:00:00:00/a0 Emask 0x1 (device error)
[ 177.994309] ata2.00: status: {DRDY ERR }
[ 177.998273] ata2.00: error: {ABRT }
[ 178.001933] ata2.00: configured for UDMA/133
[ 178.006242] ata2: EH complete
[ 178.009270] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 178.015747] ata2.00: irq_stat 0x40000001
[ 178.019710] ata2.00: cmd e5/00:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0
[ 178.019711] res 51/04:00:01:01:80/00:00:00:00:00/a0 Emask 0x1 (device error)
[ 178.040433] ata2.00: status: {DRDY ERR }
[ 178.044395] ata2.00: error: {ABRT }
[ 178.048058] ata2.00: configured for UDMA/133
[ 178.052365] ata2: EH complete
[ 178.055390] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 178.061870] ata2.00: irq_stat 0x40000001
[ 178.065833] ata2.00: cmd e5/00:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0
[ 178.065834] res 51/04:00:01:01:80/00:00:00:00:00/a0 Emask 0x1 (device error)
[ 178.081306] ata2.00: status: {DRDY ERR }
[ 178.085270] ata2.00: error: {ABRT }
[ 178.088932] ata2.00: configured for UDMA/133
[ 178.093241] ata2: EH complete
[ 178.096265] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 178.102745] ata2.00: irq_stat 0x40000001
[ 178.106708] ata2.00: cmd e5/00:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0
[ 178.106709] res 51/04:00:01:01:80/00:00:00:00:00/a0 Emask 0x1 (device error)
[ 178.122182] ata2.00: status: {DRDY ERR }
[ 178.126144] ata2.00: error: {ABRT }
[ 178.129804] ata2.00: configured for UDMA/133
[ 178.134115] ata2: EH complete
[ 178.137139] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 178.143616] ata2.00: irq_stat 0x40000001
[ 178.147573] ata2.00: cmd e5/00:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0
[ 178.147574] res 51/04:00:01:01:80/00:00:00:00:00/a0 Emask 0x1 (device error)
[ 178.163046] ata2.00: status: {DRDY ERR }
[ 178.167007] ata2.00: error: {ABRT }
[ 178.170670] ata2.00: configured for UDMA/133
[ 178.174978] ata2: EH complete
[ 178.178005] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 178.184481] ata2.00: irq_stat 0x40000001
[ 178.188438] ata2.00: cmd e5/00:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0
[ 178.188439] res 51/04:00:01:01:80/00:00:00:00:00/a0 Emask 0x1 (device error)
[ 178.203911] ata2.00: status: {DRDY ERR }
[ 178.207872] ata2.00: error: {ABRT }
[ 178.211535] ata2.00: configured for UDMA/133
[ 178.215844] ata2: EH complete
[ 178.218871] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 178.225347] ata2.00: irq_stat 0x40000001
[ 178.229303] ata2.00: cmd e5/00:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0
[ 178.229304] res 51/04:00:01:01:80/00:00:00:00:00/a0 Emask 0x1 (device error)
[ 178.244787] ata2.00: status: {DRDY ERR }
[ 178.248748] ata2.00: error: {ABRT }
[ 178.252410] ata2.00: configured for UDMA/133
[ 178.256718] ata2: EH complete
[ 178.259743] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 178.266221] ata2.00: irq_stat 0x40000001
[ 178.270177] ata2.00: cmd e5/00:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0
[ 178.270178] res 51/04:00:01:01:80/00:00:00:00:00/a0 Emask 0x1 (device error)
[ 178.285651] ata2.00: status: {DRDY ERR }
[ 178.289612] ata2.00: error: {ABRT }
[ 178.293275] ata2.00: configured for UDMA/133
[ 178.297583] ata2: EH complete
[ 178.300608] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 178.307086] ata2.00: irq_stat 0x40000001
[ 178.311043] ata2.00: cmd e5/00:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0
[ 178.311044] res 51/04:00:01:01:80/00:00:00:00:00/a0 Emask 0x1 (device error)
[ 178.326515] ata2.00: status: {DRDY ERR }
[ 178.330477] ata2.00: error: {ABRT }
[ 178.334144] ata2.00: configured for UDMA/133
[ 178.338450] ata2: EH complete
[ 178.341484] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 178.347959] ata2.00: irq_stat 0x40000001
[ 178.351916] ata2.00: cmd e5/00:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0
[ 178.351917] res 51/04:00:01:01:80/00:00:00:00:00/a0 Emask 0x1 (device error)
[ 178.367399] ata2.00: status: {DRDY ERR }
[ 178.371361] ata2.00: error: {ABRT }
[ 178.375022] ata2.00: configured for UDMA/133
[ 178.379332] ata2: EH complete
[ 178.382357] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 178.388835] ata2.00: irq_stat 0x40000001
[ 178.392799] ata2.00: cmd e5/00:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0
[ 178.392799] res 51/04:00:01:01:80/00:00:00:00:00/a0 Emask 0x1 (device error)
[ 178.408272] ata2.00: status: {DRDY ERR }
[ 178.412234] ata2.00: error: {ABRT }
[ 178.415899] ata2.00: configured for UDMA/133
[ 178.420205] ata2: EH complete
[ 178.423233] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 178.429708] ata2.00: irq_stat 0x40000001
[ 178.433665] ata2.00: cmd e5/00:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0
[ 178.433665] res 51/04:00:01:01:80/00:00:00:00:00/a0 Emask 0x1 (device error)
[ 178.449137] ata2.00: status: {DRDY ERR }
[ 178.453099] ata2.00: error: {ABRT }
[ 178.456762] ata2.00: configured for UDMA/133
[ 178.461070] ata2: EH complete
[ 178.464090] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 178.470564] ata2.00: irq_stat 0x40000001
[ 178.474521] ata2.00: cmd e5/00:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0
[ 178.474522] res 51/04:00:01:01:80/00:00:00:00:00/a0 Emask 0x1 (device error)
[ 178.490004] ata2.00: status: {DRDY ERR }
[ 178.493966] ata2.00: error: {ABRT }
[ 178.497626] ata2.00: configured for UDMA/133
[ 178.501937] ata2: EH complete
[ 178.504961] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 178.511439] ata2.00: irq_stat 0x40000001
[ 178.515395] ata2.00: cmd e5/00:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0
[ 178.515396] res 51/04:00:01:01:80/00:00:00:00:00/a0 Emask 0x1 (device error)
[ 178.530868] ata2.00: status: {DRDY ERR }
[ 178.534829] ata2.00: error: {ABRT }
[ 178.538493] ata2.00: configured for UDMA/133
[ 178.542801] ata2: EH complete
[ 178.545827] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 178.552304] ata2.00: irq_stat 0x40000001
[ 178.556261] ata2.00: cmd e5/00:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0
[ 178.556262] res 51/04:00:01:01:80/00:00:00:00:00/a0 Emask 0x1 (device error)
[ 178.571: {ABRT }
[ 178.579359] ata2.00: configured for UDMA/133
[ 178.583668] ata2: EH complete
[ 178.583670] sd 2:0:0:0: [sdd] a2.00: irq_stat 0x40000001
[ 178.600661] ata2.00: cmd 40/00:01:00:00:00/00:00:00:00:00/e0 tag 0 cdb 0x0 data 0
[ 178.60066status: {DRDY ERR }
[ 178.620095] ata2.00: error: {ABRT }
[ 178.623756] ata2.00: configured for UDMA/133
[ 178.628067] at0 data 0
[ 178.641526] res 51/04:00:01:01:80/00:00:00:00:00/a0 Emask 0x1 (device error)
[ 178.656999] ata2.00: stMA/133
[ 178.668930] ata2: EH complete
[ 178.671958] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 178.6784 0 cdb 0x0 data 0
[ 178.682391] res 51/04:00:01:01:80/00:00:00:00:00/a0 Emask 0x1 (device error)
[ 178.697873] atred for UDMA/133
[ 178.709805] ata2: EH complete
[ 178.712832] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[rror)
[ 178.738745] ata2.00: status: {DRDY ERR }
[ 178.742709] ata2.00: error: {ABRT }
[ 178.746370] ata2.00: configured 0 SErr 0x0 action 0x0
[ 178.760182] ata2.00: irq_stat 0x40000001
[ 178.769394] ata2.00: cmd 40/00:01:00:00:00/00:00:00:00:00/e0 tag 0 cdb 0x0 data 0
[ 178.769395] res 51/04:00:01:01:80/00:00:00:00:00/a0 Emask 0x1 (device error)
[ 178.78 ERR }
[ 178.788831] ata2.00: error: {ABRT }
[ 178.792495] ata2.00: configured for UDMA/133
[ 178.796801] ata2: EH comple 178.810263] res 51/04:00:01:01:80/00:00:00:00:00/a0 Emask 0x1 (device error)
[ 178.825742] ata2.00: status: {DRDY E8.837676] ata2: EH complete
[ 179.837924] .<3>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 179.844821] ata2.00: irq_stat 0x40000001
[ 179.848785] ata2.00: cmd e5/00:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0
[ 179.848786] res 51/04:00:01:01:80/00:00:00:00:00/a0 Emask 0x1 (device error)
[ 179.864265] ata2.00: status: {DRDY ERR }
[ 179.868226] ata2.00: error: {ABRT }
[ 179.871891] ata2.00: configured for UDMA/133
[ 179.876197] ata2: EH complete
[ 179.879224] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 179.885700] ata2.00: irq_stat 0x40000001
[ 179.889659] ata2.00: cmd e5/00:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0
[ 179.889660] res 51/04:00:01:01:80/00:00:00:00:00/a0 Emask 0x1 (device error)
[ 179.905138] ata2.00: status: {DRDY ERR }
[ 179.909102] ata2.00: error: {ABRT }
[ 179.912763] ata2.00: configured for UDMA/133
[ 179.917071] ata2: EH complete
[ 179.920098] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 179.926576] ata2.00: irq_stat 0x40000001
[ 179.930539] ata2.00: cmd e5/00:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0
[ 179.930540] res 51/04:00:01:01:80/00:00:00:00:00/a0 Emask 0x1 (device error)
[ 179.946012] ata2.00: status: {DRDY ERR }
[ 179.949976] ata2.00: error: {ABRT }
[ 179.953637] ata2.00: configured for UDMA/133
[ 179.957945] ata2: EH complete
[ 179.960969] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 179.967440] ata2.00: irq_stat 0x40000001
[ 179.971396] ata2.00: cmd e5/00:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0
[ 179.971397] res 51/04:00:01:01:80/00:00:00:00:00/a0 Emask 0x1 (device error)
[ 179.986869] ata2.00: status: {DRDY ERR }
[ 179.990831] ata2.00: error: {ABRT }
[ 179.994494] ata2.00: configured for UDMA/133
[ 179.998802] ata2: EH complete
[ 180.001828] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 180.008306] ata2.00: irq_stat 0x40000001
[ 180.012272] ata2.00: cmd e5/00:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0
[ 180.012272] res 51/04:00:01:01:80/00:00:00:00:00/a0 Emask 0x1 (device error)
[ 180.027743] ata2.00: status: {DRDY ERR }
[ 180.031705] ata2.00: error: {ABRT }
[ 180.035369] ata2.00: configured for UDMA/133
[ 180.039677] ata2: EH complete
[ 180.042702] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 180.049180] ata2.00: irq_stat 0x40000001
[ 180.053146] ata2.00: cmd e5/00:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0
[ 180.053147] res 51/04:00:01:01:80/00:00:00:00:00/a0 Emask 0x1 (device error)
[ 180.068636] ata2.00: status: {DRDY ERR }
[ 180.072598] ata2.00: error: {ABRT }
[ 180.076258] ata2.00: configured for UDMA/133
[ 180.080569] ata2: EH complete
[ 180.083594] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 180.090070] ata2.00: irq_stat 0x40000001
[ 180.094028] ata2.00: cmd e5/00:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0
[ 180.094029] res 51/04:00:01:01:80/00:00:00:00:00/a0 Emask 0x1 (device error)
[ 180.109508] ata2.00: status: {DRDY ERR }
[ 180.113472] ata2.00: error: {ABRT }
[ 180.117132] ata2.00: configured for UDMA/133
[ 180.121442] ata2: EH complete
[ 180.124469] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 180.130945] ata2.00: irq_stat 0x40000001
[ 180.134901] ata2.00: cmd e5/00:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0
[ 180.134902] res 51/04:00:01:01:80/00:00:00:00:00/a0 Emask 0x1 (device error)
[ 180.150374] ata2.00: status: {DRDY ERR }
[ 180.154336] ata2.00: error: {ABRT }
[ 180.158000] ata2.00: configured for UDMA/133
[ 180.162307] ata2: EH complete
[ 180.165332] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 180.171809] ata2.00: irq_stat 0x40000001
[ 180.175766] ata2.00: cmd e5/00:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0
[ 180.175766] res 51/04:00:01:01:80/00:00:00:00:00/a0 Emask 0x1 (device error)
[ 180.191239] ata2.00: status: {DRDY ERR }
[ 180.195202] ata2.00: error: {ABRT }
[ 180.198863] ata2.00: configured for UDMA/133
[ 180.203173] ata2: EH complete
[ 180.206197] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 180.212675] ata2.00: irq_stat 0x40000001
[ 180.216631] ata2.00: cmd e5/00:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0
[ 180.216632] res 51/04:00:01:01:80/00:00:00:00:00/a0 Emask 0x1 (device error)
[ 180.232104] ata2.00: status: {DRDY ERR }
[ 180.236066] ata2.00: error: {ABRT }
[ 180.239729] ata2.00: configured for UDMA/133
[ 180.244037] ata2: EH complete
[ 180.247064] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 180.253542] ata2.00: irq_stat 0x40000001
[ 180.257505] ata2.00: cmd e5/00:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0
[ 180.257506] res 51/04:00:01:01:80/00:00:00:00:00/a0 Emask 0x1 (device error)
[ 180.272978] ata2.00: status: {DRDY ERR }
[ 180.276940] ata2.00: error: {ABRT }
[ 180.280603] ata2.00: configured for UDMA/133
[ 180.284911] ata2: EH complete
[ 180.287938] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 180.294414] ata2.00: irq_stat 0x40000001
[ 180.298370] ata2.00: cmd e5/00:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0
[ 180.298371] res 51/04:00:01:01:80/00:00:00:00:00/a0 Emask 0x1 (device error)
[ 180.313854] ata2.00: status: {DRDY ERR }
[ 180.317816] ata2.00: error: {ABRT }
[ 180.321479] ata2.00: configured for UDMA/133
[ 180.325787] ata2: EH complete
[ 180.328821] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 180.335296] ata2.00: irq_stat 0x40000001
[ 180.339253] ata2.00: cmd e5/00:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0
[ 180.339254] res 51/04:00:01:01:80/00:00:00:00:00/a0 Emask 0x1 (device error)
[ 180.354728] ata2.00: status: {DRDY ERR }
[ 180.358690] ata2.00: error: {ABRT }
[ 180.362351] ata2.00: configured for UDMA/133
[ 180.366659] ata2: EH complete
[ 180.369686] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 180.376165] ata2.00: irq_stat 0x40000001
[ 180.380128] ata2.00: cmd e5/00:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0
[ 180.380129] res 51/04:00:01:01:80/00:00:00:00:00/a0 Emask 0x1 (device error)
[ 180.395600] ata2.00: status: {DRDY ERR }
[ 180.399564] ata2.00: error: {ABRT }
[ 180.403224] ata2.00: configured for UDMA/133
[ 180.407535] ata2: EH complete
[ 180.410567] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 180.417045] ata2.00: irq_stat 0x40000001
[ 180.421001] ata2.00: cmd e5/00:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0
[ 180.421002] res 51/04:00:01:01:80/00:00:00:00:00/a0 Emask 0x1 (device error)
[ 180.436474] ata2.00: status: {DRDY ERR }
[ 180.440436] ata2.00: error: {ABRT }
[ 180.444099] ata2.00: configured for UDMA/133
[ 180.448407] ata2: EH complete
[ 180.451435] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 180.457909] ata2.00: irq_stat 0x40000001
[ 180.461868] ata2.00: cmd e5/00:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0
[ 180.461869] res 51/04:00:01:01:80/00:00:00:00:00/a0 Emask 0x1 (device error)
[ 180.477350] ata2.00: status: {DRDY ERR }
[ 180.481312] ata2.00: error: {ABRT }
[ 180.484975] ata2.00: configured for UDMA/133
[ 180.489281] ata2: EH complete
[ 180.492308] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 180.498785] ata2.00: irq_stat 0x40000001
[ 180.508004] ata2.00: cmd e5/00:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0
[ 180.508005] res 51/04:00:01:01:80/00:00:00:00:00/a0 Emask 0x1 (device error)
[ 180.523481] ata2.00: status: {DRDY ERR }
[ 180.527443] ata2.00: error: {ABRT }
[ 180.531105] ata2.00: configured for UDMA/133
[ 180.535415] ata2: EH complete
[ 180.538449] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 180.544924] ata2.00: irq_stat 0x40000001
[ 180.548880] ata2.00: cmd e5/00:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0
[ 180.548881] res 51/04:00:01:01:80/00:00:00:00:00/a0 Emask 0x1 (device error)
[ 180.564353] ata2.00: status: {DRDY ERR }
[ 180.568317] ata2.00: error: {ABRT }
[ 180.571977] ata2.00: configured for UDMA/133
[ 180.576289] ata2: EH complete
[ 181.577019] .<3>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 181.583908] ata2.00: irq_stat 0x40000001
[ 181.587872] ata2.00: cmd e5/00:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0
[ 181.587873] res 51/04:00:01:01:80/00:00:00:00:00/a0 Emask 0x1 (device error)
[ 181.603363] ata2.00: status: {DRDY ERR }
[ 181.607325] ata2.00: error: {ABRT }
[ 181.610988] ata2.00: configured for UDMA/133
[ 181.615294] ata2: EH complete
[ 181.618321] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 181.624797] ata2.00: irq_stat 0x40000001
[ 181.628753] ata2.00: cmd e5/00:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0
[ 181.628754] res 51/04:00:01:01:80/00:00:00:00:00/a0 Emask 0x1 (device error)
[ 181.644226] ata2.00: status: {DRDY ERR }
[ 181.648188] ata2.00: error: {ABRT }
[ 181.651850] ata2.00: configured for UDMA/133
[ 181.656158] ata2: EH complete
[ 181.659185] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 181.665663] ata2.00: irq_stat 0x40000001
[ 181.669627] ata2.00: cmd e5/00:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0
[ 181.669628] res 51/04:00:01:01:80/00:00:00:00:00/a0 Emask 0x1 (device error)
[ 181.685102] ata2.00: status: {DRDY ERR }
[ 181.689064] ata2.00: error: {ABRT }
[ 181.692724] ata2.00: configured for UDMA/133
[ 181.697034] ata2: EH complete
[ 181.700056] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 181.706528] ata2.00: irq_stat 0x40000001
[ 181.710484] ata2.00: cmd e5/00:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0
[ 181.710485] res 51/04:00:01:01:80/00:00:00:00:00/a0 Emask 0x1 (device error)
[ 181.725957] ata2.00: status: {DRDY ERR }
[ 181.729920] ata2.00: error: {ABRT }
[ 182.249375] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x40)
[ 182.255595] ata2.00: revalidation failed (errno=-5)
[ 182.260511] ata2: failed to recover some devices, retrying in 5 secs
[ 189.469586] ata2: soft resetting link
[ 189.473287] ata2: SATA link down (SStatus 11 SControl 310)
[ 189.478809] ata2.00: limiting speed to UDMA/133:PIO1
[ 189.483812] ata2: failed to recover some devices, retrying in 5 secs
[ 194.490292] ata2: hard resetting link
[ 195.179947] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 195.186298] ata2.00: configured for UDMA/133
[ 195.190611] ata2: exception Emask 0x10 SAct 0x0 SErr 0x4010000 action 0x3 t4
[ 195.197695] ata2: irq_stat 0x00000040, connection status changed
[ 195.203741] ata2: SError: {PHYRdyChg DevExch }
[ 195.919559] ata2: soft resetting link
[ 196.082802] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
00:00.0 Host bridge: Intel Corporation 82975X Memory Controller Hub (rev c0)
Subsystem: ASUSTeK Computer Inc. Unknown device 8178
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
Latency: 0
Capabilities: <access denied>
00:01.0 PCI bridge: Intel Corporation 82975X PCI Express Root Port (rev c0) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 16 bytes
Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
Memory behind bridge: faa00000-feafffff
Prefetchable memory behind bridge: 00000000cff00000-00000000efefffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
Capabilities: <access denied>
00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 01)
Subsystem: ASUSTeK Computer Inc. Unknown device 81d8
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 16 bytes
Interrupt: pin A routed to IRQ 19
Region 0: Memory at febfc000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 01) (prog-if 00 [Normal decode])
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 16 bytes
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
Prefetchable memory behind bridge: 00000000cfe00000-00000000cfefffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
Capabilities: <access denied>
00:1c.3 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 4 (rev 01) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 16 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: fa900000-fa9fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
Capabilities: <access denied>
00:1c.5 PCI bridge: Intel Corporation 82801GR/GH/GHM (ICH7 Family) PCI Express Port 6 (rev 01) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 16 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000b000-0000bfff
Memory behind bridge: fa800000-fa8fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
Capabilities: <access denied>
00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #1 (rev 01) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Unknown device 8179
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 20
Region 4: I/O ports at e800 [size=32]
00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #2 (rev 01) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Unknown device 8179
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin B routed to IRQ 17
Region 4: I/O ports at e880 [size=32]
00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #3 (rev 01) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Unknown device 8179
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at ec00 [size=32]
00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 01) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. Unknown device 8179
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 20
Region 0: Memory at febfbc00 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
I/O behind bridge: 0000a000-0000afff
Memory behind bridge: fa600000-fa7fffff
Prefetchable memory behind bridge: 0000000050000000-00000000500fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
Capabilities: <access denied>
00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge (rev 01)
Subsystem: ASUSTeK Computer Inc. Unknown device 8179
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Capabilities: <access denied>
00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 01) (prog-if 8a [Master SecP PriP])
Subsystem: ASUSTeK Computer Inc. Unknown device 8179
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 22
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at ffa0 [size=16]
00:1f.2 SATA controller: Intel Corporation 82801GR/GH (ICH7 Family) Serial ATA Storage Controller AHCI (rev 01) (prog-if 01 [AHCI 1.0])
Subsystem: ASUSTeK Computer Inc. Unknown device 2606
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin B routed to IRQ 315
Region 0: I/O ports at e480 [size=8]
Region 1: I/O ports at e400 [size=4]
Region 2: I/O ports at e080 [size=8]
Region 3: I/O ports at e000 [size=4]
Region 4: I/O ports at dc00 [size=16]
Region 5: Memory at febfb800 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 01)
Subsystem: ASUSTeK Computer Inc. Unknown device 8179
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin B routed to IRQ 23
Region 4: I/O ports at 0400 [size=32]
01:00.0 RAID bus controller: Silicon Image, Inc. PCI0680 Ultra ATA-133 Host Controller (rev 02)
Subsystem: Silicon Image, Inc. Winic W-680 (Silicon Image 680 based)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64, Cache Line Size: 4 bytes
Interrupt: pin A routed to IRQ 21
Region 0: I/O ports at ac00 [size=8]
Region 1: I/O ports at a880 [size=4]
Region 2: I/O ports at a800 [size=8]
Region 3: I/O ports at a480 [size=4]
Region 4: I/O ports at a400 [size=16]
Region 5: Memory at fa7ffc00 (32-bit, non-prefetchable) [size=256]
Expansion ROM at 50000000 [disabled] [size=512K]
Capabilities: <access denied>
01:01.0 SCSI storage controller: Adaptec AHA-2940U2/U2W
Subsystem: Adaptec AHA-2940U2W SCSI Controller
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (9750ns min, 6250ns max)
Interrupt: pin A routed to IRQ 22
BIST result: 00
Region 0: I/O ports at a000 [disabled] [size=256]
Region 1: Memory at fa7fe000 (64-bit, non-prefetchable) [size=4K]
Expansion ROM at 50080000 [disabled] [size=128K]
Capabilities: <access denied>
02:00.0 SATA controller: JMicron Technologies, Inc. JMicron 20360/20363 AHCI Controller (rev 02) (prog-if 01 [AHCI 1.0])
Subsystem: ASUSTeK Computer Inc. Unknown device 81e4
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 16 bytes
Interrupt: pin A routed to IRQ 17
Region 5: Memory at fa8fe000 (32-bit, non-prefetchable) [size=8K]
Expansion ROM at fa8e0000 [disabled] [size=64K]
Capabilities: <access denied>
02:00.1 IDE interface: JMicron Technologies, Inc. JMicron 20360/20363 AHCI Controller (rev 02) (prog-if 85 [Master SecO PriO])
Subsystem: ASUSTeK Computer Inc. Unknown device 81e4
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin B routed to IRQ 0
Region 0: I/O ports at bc00 [size=8]
Region 1: I/O ports at b880 [size=4]
Region 2: I/O ports at b800 [size=8]
Region 3: I/O ports at b480 [size=4]
Region 4: I/O ports at b400 [size=16]
Capabilities: <access denied>
03:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8053 PCI-E Gigabit Ethernet Controller (rev 20)
Subsystem: ASUSTeK Computer Inc. Marvell 88E8053 Gigabit Ethernet controller PCIe (Asus)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 16 bytes
Interrupt: pin A routed to IRQ 314
Region 0: Memory at fa9fc000 (64-bit, non-prefetchable) [size=16K]
Region 2: I/O ports at c800 [size=256]
Expansion ROM at fa9c0000 [disabled] [size=128K]
Capabilities: <access denied>
05:00.0 VGA compatible controller: nVidia Corporation GeForce 7300 GS (rev a1) (prog-if 00 [VGA])
Subsystem: Unknown device 19f1:1fe2
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at d0000000 (64-bit, prefetchable) [size=256M]
Region 3: Memory at fc000000 (64-bit, non-prefetchable) [size=16M]
[virtual] Expansion ROM at feae0000 [disabled] [size=128K]
Capabilities: <access denied>
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
