Re: [RFC PATCH] Add CRC checksum for RCU lists

["Paul E. McKenney" <paulmck@linux.vnet.ibm.com>]

On Thu, Sep 20, 2007 at 02:34:11PM -0400, Steven Rostedt wrote:
> In recent development of the RT kernel, some of our experimental code
> corrupted the rcu header. But the side effect (crashing) didn't rear its
> ugly head until way after the fact. Discussing this with Paul, he
> suggested that RCU should have a "self checking" mechanism to detect
> these kind of issues. He also suggested putting in a CRC into the
> rcu_head structure.
> 
> This patch does so.

Very cool!!!

> Since there is a bit of overhead with adding this checking, I made it a
> config option that would best be turned on for any development that uses
> RCU callbacks.
> 
> The way this works is when CRC is configured, two elements are added to
> the rcu_head. A crc (long to be consistent, although it only uses a
> 32bit value) and a caller.  The caller is location of who called the
> call_rcu, which is very useful when a corruption does occur. Although,
> another item may have corrupted the rcu_head, from my experience (the
> crash we had), there are several of the same items that do the call_rcu
> together.

Good point, having the caller could give a good clue as to which piece
of code was mishandling callbacks.

> On call_rcu, the checksum is created of the next pointer and the
> function to call. The checksum algorithm is simply a XOR of some magic
> number with each 4 bytes of the next and func pointer of the rcu_head.
> This is then placed into the crc of the rcu_head as well as the return
> address.
> 
> Various stages of RCU handling does a checksum of the RCU lists to make
> sure that everything is what it expects it to be. Again, this does have
> a slight performance impact (although I haven't noticed it with various
> tasks, but I'm sure any benchmark will), so should be turned off on
> production systems. This is focused on development only.

Good approach!

> This patch also takes care to update the crc when rcu_head items are
> moved from list to list and whenever the next pointer is modified due to
> addition.

We can only be thankful that it is not possible to cancel outstanding
RCU callbacks...

> This is against the lastest git (as of this morning) so it does not
> include Paul's recent patches for RCU preempt and RCU boost. For this
> reason, this is a RFC patch since it would be better to apply this after
> those other patches make it upstream. I do have a version of this patch
> for the RT kernel that includes Paul's other patches.

Looks good -- a few suggestions for better fault coverage interspersed
below.  But would be useful as is.  (And it would be good to apply after
the preempt/boost patches, which are currently undergoing integration
with the CPU hotplug patches -- the good news is that this integration
eliminates the need for patch #4!)

Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>

> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
> 
> diff --git a/include/linux/rcupdate.h b/include/linux/rcupdate.h
> index fe17d7d..baca7e6 100644
> --- a/include/linux/rcupdate.h
> +++ b/include/linux/rcupdate.h
> @@ -50,13 +50,81 @@
>  struct rcu_head {
>  	struct rcu_head *next;
>  	void (*func)(struct rcu_head *head);
> +#ifdef CONFIG_RCU_CRC_HEADER_CHECK
> +	/*
> +	 * Checks are made in C files knowing that "next" is
> +	 * the first element. So keep it the first element.
> +	 */
> +	unsigned long crc;
> +	void *caller;
> +#endif
>  };

Looks good, but one question -- why not include the caller in the CRC?
Not a big deal either way, but would catch a few more cases of corruption.
Also, as things stand, the caller pointer can be silently corrupted,
which might causes confusion if someone had to examine the RCU callback
lists from a crash dump.

Interchanging the order of "crc" and "caller" would change the strategy,
if I understand correctly.

> -#define RCU_HEAD_INIT 	{ .next = NULL, .func = NULL }
> +#ifdef CONFIG_RCU_CRC_HEADER_CHECK
> +
> +#define RCU_CRC_MAGIC 0xC4809168UL

Very magic indeed -- Google doesn't find it, other than in your
patch.  ;-)

> +static inline unsigned long rcu_crc_calc(struct rcu_head *head)
> +{
> +	unsigned int *p = (unsigned int*)head; /* 32 bit */
> +	unsigned long crc = RCU_CRC_MAGIC;
> +
> +	for (p=(void *)head; (void*)p < (void*)&head->crc; p++)
> +		crc ^= *p;
> +	return crc;
> +}

Why initialize "p" twice?  (Once in the declaration, and once in the
"for" loop, but with different casts.)

> +static inline void rcu_crc_check(struct rcu_head *head)
> +{
> +	static int once;
> +	if (unlikely(head->crc != rcu_crc_calc(head)) && !once) {
> +		once++;

Do we want exactly one (give or take concurrent checks), or do we want
the first ten or so?  Sometimes having a modest sample rather than
exactly one is helpful.

And I know that it doesn't matter in this case, but I cannot stop myself
from pointing out the possibility of making "once" be an atomic_t
that is initialized to (say) -10, then making the !once check be an
atomic_add_return().  (Whew!  Good to get that off my chest!!!)

Now back to real problems.  ;-)

(Note to self...)  The way this is coded could possibly result in false
positives.  Suppose that the last element in a given callback list has
its CRC correctly calculated.  Now suppose that a new callback is being
added to the end of the list.  This addition is non-atomic, so the of
the old last element will be momentarily incorrect.  So, need to check
that all list checks are protected by some lock.  (And all the cases
I saw below are in fact OK.)

> +		printk("BUG: RCU check failed!");
> +		if (head->caller)
> +			printk(" (caller=%p)",
> +			       head->caller);
> +		printk("\n");
> +		printk("  CRC was %08lx, expected %08lx\n",
> +		       head->crc, rcu_crc_calc(head));

I suggest also printing head->crc^rcu_crc_calc(head) to make cases
where a single bit is being corrupted more obvious.

> +		printk("  %p %p\n",
> +		       head->next, head->func);
> +		dump_stack();
> +	}
> +}
> +
> +static inline void rcu_assign_crc(struct rcu_head *head)
> +{
> +	head->crc = rcu_crc_calc(head);
> +	head->caller = __builtin_return_address(0);
> +}

If you do decide to move the caller into the CRC calculation, it
will be necessary to reverse the above pair of lines.

> +static inline void rcu_check_list(struct rcu_head *head)
> +{
> +	int loop;
> +	for (loop = 0;
> +	     head != NULL && loop < 100;
> +	     head=head->next, loop++)
> +		rcu_crc_check(head);
> +}
> +
> +# define RCU_CRC_INIT , .crc = RCU_CRC_MAGIC

Would need to initialize caller here if you add it to the CRC.

> +# define RCU_CRC_SET(ptr) (ptr)->crc = RCU_CRC_MAGIC

And here as well.

But this has the effect of causing the CRC to be born correct.  Do we
really want that?  Suppose someone incorrectly re-initialized a callback
that was still on a list.  Wouldn't it be better to get a CRC warning than
a NULL pointer exception?  So suggest something like RCU_CRC_MAGIC+1 --
perhaps with a RCU_CRC_BAD_MAGIC symbol.

> +#else
> +# define rcu_crc_calc(head) 0
> +# define rcu_crc_check(head) do { } while(0)
> +# define rcu_assign_crc(head) do { } while(0)
> +# define rcu_check_list(head) do { } while(0)
> +# define RCU_CRC_INIT
> +# define RCU_CRC_SET(ptr) do { } while(0)
> +#endif /* CONFIG_RCU_CRC_HEADER_CHECK */
> +
> +#define RCU_HEAD_INIT 	{ .next = NULL, .func = NULL RCU_CRC_INIT }
>  #define RCU_HEAD(head) struct rcu_head head = RCU_HEAD_INIT
> -#define INIT_RCU_HEAD(ptr) do { \
> -       (ptr)->next = NULL; (ptr)->func = NULL; \
> -} while (0)
> +#define INIT_RCU_HEAD(ptr) do {				\
> +		(ptr)->next = NULL; (ptr)->func = NULL; \
> +		RCU_CRC_SET(ptr);			\
> +	} while (0)
> 
> 
> 
> diff --git a/kernel/rcupdate.c b/kernel/rcupdate.c
> index 2c2dd84..4c3cc9c 100644
> --- a/kernel/rcupdate.c
> +++ b/kernel/rcupdate.c
> @@ -76,6 +76,23 @@ static atomic_t rcu_barrier_cpu_count;
>  static DEFINE_MUTEX(rcu_barrier_mutex);
>  static struct completion rcu_barrier_completion;
> 
> +#ifdef CONFIG_RCU_CRC_HEADER_CHECK
> +#define rcu_check_rdp(rdp)			\
> +	do {					\
> +		rcu_check_list(rdp->nxtlist);	\
> +		rcu_check_list(rdp->curlist);	\
> +		rcu_check_list(rdp->donelist);	\
> +	} while(0)
> +#define rcu_crc_update_tail(rdp, tail, list)				\
> +	do {								\
> +		if ((rdp)->tail != &(rdp)->list)			\
> +			rcu_assign_crc((struct rcu_head*)(rdp)->tail);	\
> +	} while(0)
> +#else
> +# define rcu_check_rdp(rdp) do { } while(0)
> +# define rcu_crc_update_tail(rdp, tail, list) do { } while(0)
> +#endif
> +
>  #ifdef CONFIG_SMP
>  static void force_quiescent_state(struct rcu_data *rdp,
>  			struct rcu_ctrlblk *rcp)
> @@ -122,14 +139,19 @@ void fastcall call_rcu(struct rcu_head *head,
> 
>  	head->func = func;
>  	head->next = NULL;
> +	rcu_assign_crc(head);
>  	local_irq_save(flags);
>  	rdp = &__get_cpu_var(rcu_data);
>  	*rdp->nxttail = head;

The CRC of the tail element is incorrect at this point, but that is OK
because we have interrupts disabled and no other CPU can access our list
in the meantime.

> +	rcu_crc_update_tail(rdp, nxttail, nxtlist);
>  	rdp->nxttail = &head->next;
>  	if (unlikely(++rdp->qlen > qhimark)) {
>  		rdp->blimit = INT_MAX;
>  		force_quiescent_state(rdp, &rcu_ctrlblk);
>  	}
> +
> +	rcu_check_rdp(rdp);

This check is OK -- no other CPU should be able to manipulate our
rdp, and we have interrupts disabled.  Same situation for call_rcu_bh()
below.

>  	local_irq_restore(flags);
>  }
> 
> @@ -157,9 +179,11 @@ void fastcall call_rcu_bh(struct rcu_head *head,
> 
>  	head->func = func;
>  	head->next = NULL;
> +	rcu_assign_crc(head);
>  	local_irq_save(flags);
>  	rdp = &__get_cpu_var(rcu_bh_data);
>  	*rdp->nxttail = head;
> +	rcu_crc_update_tail(rdp, nxttail, nxtlist);
>  	rdp->nxttail = &head->next;
> 
>  	if (unlikely(++rdp->qlen > qhimark)) {
> @@ -167,6 +191,8 @@ void fastcall call_rcu_bh(struct rcu_head *head,
>  		force_quiescent_state(rdp, &rcu_bh_ctrlblk);
>  	}
> 
> +	rcu_check_rdp(rdp);
> +
>  	local_irq_restore(flags);
>  }
> 
> @@ -233,6 +259,8 @@ static void rcu_do_batch(struct rcu_data *rdp)
>  	struct rcu_head *next, *list;
>  	int count = 0;
> 
> +	rcu_check_rdp(rdp);

OK, interrupts disabled here.

>  	list = rdp->donelist;
>  	while (list) {
>  		next = list->next;

Why not invalidate the CRC of the element that we just removed?  This
would catch some cases of list mangling.

> @@ -373,6 +401,7 @@ static void rcu_move_batch(struct rcu_data *this_rdp, struct rcu_head *list,
>  {
>  	local_irq_disable();
>  	*this_rdp->nxttail = list;

Momentarily wrong CRC OK, interrupts disabled here.  Ditto for
__rcu_process_callbacks() below.

> +	rcu_crc_update_tail(this_rdp, nxttail, nxtlist);
>  	if (list)
>  		this_rdp->nxttail = tail;
>  	local_irq_enable();
> @@ -424,6 +453,7 @@ static void __rcu_process_callbacks(struct rcu_ctrlblk *rcp,
>  {
>  	if (rdp->curlist && !rcu_batch_before(rcp->completed, rdp->batch)) {
>  		*rdp->donetail = rdp->curlist;
> +		rcu_crc_update_tail(rdp, donetail, donelist);
>  		rdp->donetail = rdp->curtail;
>  		rdp->curlist = NULL;
>  		rdp->curtail = &rdp->curlist;
> diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug
> index 50a94ee..981fc93 100644
> --- a/lib/Kconfig.debug
> +++ b/lib/Kconfig.debug
> @@ -424,6 +424,17 @@ config RCU_TORTURE_TEST
>  	  Say M if you want the RCU torture tests to build as a module.
>  	  Say N if you are unsure.
> 
> +config RCU_CRC_HEADER_CHECK
> +	bool "RCU header self check"
> +	depends on DEBUG_KERNEL
> +	help
> +	  This option enables CRC verification of RCU lists to catch
> +	  possible corruption to the RCU list by improper application
> +	  of RCU callbacks. This adds overhead to the running system
> +	  so only enable it if you suspect RCU corruption is occurring.
> +
> +	  If unsure, say N.
> +
>  config LKDTM
>  	tristate "Linux Kernel Dump Test Tool Module"
>  	depends on DEBUG_KERNEL
> 
> 
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/