Hi,
With 2.6.23-rc6 running on the ppc64 box, following oops is hit
Oops: Machine check, sig: 7 [#1]
SMP NR_CPUS=128 pSeries
Modules linked in: binfmt_misc ipv6 dm_mod ehci_hcd ohci_hcd usbcore
NIP: c0000000000ed560 LR: c0000000000efc7c CTR: c0000000000ed504
REGS: c00000000ffef680 TRAP: 0200 Not tainted (2.6.23-rc6-autokern1)
MSR: 8000000000109032 <EE,ME,IR,DR> CR: 28002042 XER: 00000010
TASK = c0000000ecf9f000[0] 'swapper' THREAD: c00000000ff8c000 CPU: 2
GPR00: 0000000000000000 c00000000ffef900 c0000000006fe598 c0000000d7a8f200
GPR04: 0000000000001000 0000000000000000 0000000000001000 8000000000c26393
GPR08: c0000000006b43d0 0000000000000001 0000000000001000 0000000000000000
GPR12: 0000000048000048 c0000000005f1700 0000000000000000 0000000007a8dcd0
GPR16: 0000000000000002 0000000000000000 0000000000000000 0000000000000000
GPR20: 0000000000000000 0000000000001000 0000000000001000 0000000000000000
GPR24: 0000000000000000 0000000000000000 0000000000001000 c0000000063234e8
GPR28: 0000000000001000 0000000000000000 c000000000689c08 c00000000ff3a480
NIP [c0000000000ed560] .end_bio_bh_io_sync+0x5c/0xac
LR [c0000000000efc7c] .bio_endio+0xb4/0xd4
Call Trace:
[c00000000ffef900] [c00000000ffef990] 0xc00000000ffef990 (unreliable)
[c00000000ffef980] [c0000000000efc7c] .bio_endio+0xb4/0xd4
[c00000000ffefa10] [c000000000290060] .__end_that_request_first+0x154/0x548
[c00000000ffefae0] [c00000000035af10] .scsi_end_request+0x40/0x138
[c00000000ffefb80] [c00000000035b234] .scsi_io_completion+0x188/0x454
[c00000000ffefc60] [c000000000372a24] .sd_rw_intr+0x2e4/0x338
[c00000000ffefd30] [c000000000354548] .scsi_finish_command+0xbc/0xe0
[c00000000ffefdc0] [c00000000035bdf0] .scsi_softirq_done+0x140/0x188
[c00000000ffefe60] [c000000000293184] .blk_done_softirq+0xa0/0xd0
[c00000000ffefef0] [c000000000055e1c] .__do_softirq+0xa8/0x164
[c00000000ffeff90] [c000000000023f14] .call_do_softirq+0x14/0x24
[c00000000ff8f960] [c00000000000bd30] .do_softirq+0x68/0xac
[c00000000ff8f9f0] [c000000000055f70] .irq_exit+0x54/0x6c
[c00000000ff8fa70] [c00000000000c358] .do_IRQ+0x170/0x1ac
[c00000000ff8fb00] [c000000000004780] hardware_interrupt_entry+0x18/0x98
--- Exception: 501 at .pseries_dedicated_idle_sleep+0xe0/0x194
LR = .pseries_dedicated_idle_sleep+0xd0/0x194
[c00000000ff8fdf0] [0000000000000000] .__start+0x4000000000000000/0x8 (unreliable)
[c00000000ff8fe80] [c000000000010bd4] .cpu_idle+0x104/0x1d8
[c00000000ff8ff00] [c00000000002672c] .start_secondary+0x160/0x184
[c00000000ff8ff90] [c000000000008364] .start_secondary_prolog+0xc/0x10
Instruction dump:
409a0030 393f0018 38000080 7d6048a8 7d6b0378 7d6049ad 40a2fff4 38002000
7d2018a8 7d290378 7d2019ad 40a2fff4 <e9230038> e89f0018 e9690000 f8410028
Kernel panic - not syncing: Fatal exception in interrupt
------------[ cut here ]------------
Badness at arch/powerpc/kernel/smp.c:202
NIP: c000000000026024 LR: c00000000004e378 CTR: 800000000013f270
REGS: c00000000ffef120 TRAP: 0700 Tainted: G D (2.6.23-rc6-autokern1)
MSR: 8000000000021032 <ME,IR,DR> CR: 22002022 XER: 0000000a
TASK = c0000000ecf9f000[0] 'swapper' THREAD: c00000000ff8c000 CPU: 2
GPR00: 0000000000000001 c00000000ffef3a0 c0000000006fe598 c00000000069ffb8
GPR04: 0000000000000000 0000000000000001 0000000000000000 0000000000000007
GPR08: 0000000000000000 c000000000739818 c000000000742998 c00000000069ffb8
GPR12: 0000000000004000 c0000000005f1700 0000000000000000 0000000007a8dcd0
GPR16: 0000000000000002 0000000000000000 0000000000000000 0000000000000000
GPR20: 0000000000000000 0000000000001000 0000000000001000 0000000000000000
GPR24: 0000000000000000 0000000000000000 0000000000001000 0000000000000007
GPR28: c0000000004e3190 0000000000000000 c000000000685b80 0000000000000000
NIP [c000000000026024] .smp_call_function_map+0x34/0x28c
LR [c00000000004e378] .panic+0x98/0x1b0
Call Trace:
[c00000000ffef3a0] [c0000000006943e8] 0xc0000000006943e8 (unreliable)
[c00000000ffef450] [c00000000004e378] .panic+0x98/0x1b0
[c00000000ffef4f0] [c00000000002213c] .die+0x224/0x264
[c00000000ffef590] [c0000000000231f0] .machine_check_exception+0x210/0x240
[c00000000ffef610] [c000000000003480] machine_check_common+0x100/0x180
--- Exception: 200 at .end_bio_bh_io_sync+0x5c/0xac
LR = .bio_endio+0xb4/0xd4
[c00000000ffef900] [c00000000ffef990] 0xc00000000ffef990 (unreliable)
[c00000000ffef980] [c0000000000efc7c] .bio_endio+0xb4/0xd4
[c00000000ffefa10] [c000000000290060] .__end_that_request_first+0x154/0x548
[c00000000ffefae0] [c00000000035af10] .scsi_end_request+0x40/0x138
[c00000000ffefb80] [c00000000035b234] .scsi_io_completion+0x188/0x454
[c00000000ffefc60] [c000000000372a24] .sd_rw_intr+0x2e4/0x338
[c00000000ffefd30] [c000000000354548] .scsi_finish_command+0xbc/0xe0
[c00000000ffefdc0] [c00000000035bdf0] .scsi_softirq_done+0x140/0x188
[c00000000ffefe60] [c000000000293184] .blk_done_softirq+0xa0/0xd0
[c00000000ffefef0] [c000000000055e1c] .__do_softirq+0xa8/0x164
[c00000000ffeff90] [c000000000023f14] .call_do_softirq+0x14/0x24
[c00000000ff8f960] [c00000000000bd30] .do_softirq+0x68/0xac
[c00000000ff8f9f0] [c000000000055f70] .irq_exit+0x54/0x6c
[c00000000ff8fa70] [c00000000000c358] .do_IRQ+0x170/0x1ac
[c00000000ff8fb00] [c000000000004780] hardware_interrupt_entry+0x18/0x98
--- Exception: 501 at .pseries_dedicated_idle_sleep+0xe0/0x194
LR = .pseries_dedicated_idle_sleep+0xd0/0x194
[c00000000ff8fdf0] [0000000000000000] .__start+0x4000000000000000/0x8 (unreliable)
[c00000000ff8fe80] [c000000000010bd4] .cpu_idle+0x104/0x1d8
[c00000000ff8ff00] [c00000000002672c] .start_secondary+0x160/0x184
[c00000000ff8ff90] [c000000000008364] .start_secondary_prolog+0xc/0x10
Instruction dump:
fba1ffe8 fbc1fff0 fbe1fff8 7c6b1b78 f8010010 f821ff51 7cdd3378 f8e10100
f9010108 880d01da 7c000074 7800d182 <0b000000> e922a500 3860ffff e8090000
I tired googling for similar bug and found two which where earlier reported one
at linuxppc-dev mailing list on 2.6.23-rc1 kernel
http://ozlabs.org/pipermail/linuxppc-dev/2007-July/039905.html
and other on 2.6.22-rc1 kernel
http://lkml.org/lkml/2007/5/22/390
--
Thanks & Regards,
Kamalesh Babulal,
Linux Technology Center,
IBM, ISTL.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]