> PIO mode 2 is mentioned. Even DMA seems to be supported. > Or am I mistaken? > > Could there be a bug in my south bridge? Nothing there about DMA support. The data sheet says the media can only do 4.1MB/second which is consistent with only needing PIO2 (actually its far slower than PIO2) - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
- Follow-Ups:
- References:
- hda: set_drive_speed_status: status=0x51 { DriveReady SeekComplete Error }
- From: John Sigler <[email protected]>
- Re: hda: set_drive_speed_status: status=0x51 { DriveReady SeekComplete Error }
- From: Alan Cox <[email protected]>
- Re: hda: set_drive_speed_status: status=0x51 { DriveReady SeekComplete Error }
- From: John Sigler <[email protected]>
- Re: hda: set_drive_speed_status: status=0x51 { DriveReady SeekComplete Error }
- From: John Sigler <[email protected]>
- Re: hda: set_drive_speed_status: status=0x51 { DriveReady SeekComplete Error }
- From: John Sigler <[email protected]>
- hda: set_drive_speed_status: status=0x51 { DriveReady SeekComplete Error }
- Prev by Date: RE: recent nfs change causes autofs regression
- Next by Date: RE: recent nfs change causes autofs regression
- Previous by thread: Re: hda: set_drive_speed_status: status=0x51 { DriveReady SeekComplete Error }
- Next by thread: Re: hda: set_drive_speed_status: status=0x51 { DriveReady SeekComplete Error }
- Index(es):
 |