Re: TV card detected wrongly by the kernel. Any chance to get this fixed?

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Em Qui, 2007-08-23 às 17:23 +0200, Manuel Reimer escreveu:
> Mauro Carvalho Chehab wrote:
> > If your board have an unique PCI ID, we may add it to the driver,
> > avoiding this need. For this, we will need the results of the following
> > command:
> > 
> > lspci -vv -nn
> 
> I'm using card=65 to use my card. I never tried the tuner (don't need 
> it) but the composite-in works for displaying the input of my sattelite 
> receiver and I'm able to read videotext, too. Without "card=65", I only 
> got black/white output...

> 00:10.0 Multimedia video controller [0400]: Brooktree Corporation Bt878 
> Video Capture [109e:036e] (rev 11)

I can't see and subsystem ID. Since it is not on the few range of boards
where we know other ways for detecting the board internals, there's no
known way for auto-detecting your board.

The solution for you is to add:
	options bttv card=65
into /etc/modprobe.conf (or /etc/modules.conf, or /etc/modules -
depending on your distro).

This way, every time the driver is loaded, the card=65 option will
automatically be used by the bttv driver.

-- 
Cheers,
Mauro

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[Index of Archives]     [Kernel Newbies]     [Netfilter]     [Bugtraq]     [Photo]     [Stuff]     [Gimp]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Video 4 Linux]     [Linux for the blind]     [Linux Resources]
  Powered by Linux