Re: forcedeth ?

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 7/30/07, Avuton Olrich <[email protected]> wrote:
> On 7/30/07, Sasa Ostrouska <[email protected]> wrote:
> > Hi people,
> >
> > I'm using this on a x86-64 amd machine. During boot of the last
> > 2.6.22.1 kernel I get this error:
>
> Somewhat unrelated, but I had a similar forcedeth problem, I took the
> latest git forcedeth.c and put it into 2.6.22.1 and it worked for me.
>
> Good luck!
> --
> avuton

Ok, maybe I can try that. In any case I noticed another strange thing.
I have 2 nics in that machine.
One is a nvidia MPC61 using the forcedeth.c the other one is a Realtec
RTL8029 using the
ne2k_pci.
Now, whenever I compile them both as modules each reboot the cards get
inversed eth assignement. Suppose first boot, the forcedeth is eth0 ,
the next boot it is eth1 , this is very anoying as one cant make only
one boot, probably this is someway related to the bios.
Now I configured them one in the kernel and the other as a module so
they get each time assigned the same name. But when powerloss happens
(unplug the cable) the next boot they do not work. I see them assigned
the correct name, ifconfig shows the IP's but ping results in a
destination unreachable.

Any ideas ?

Rgds
Sasa
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[Index of Archives]     [Kernel Newbies]     [Netfilter]     [Bugtraq]     [Photo]     [Stuff]     [Gimp]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Video 4 Linux]     [Linux for the blind]     [Linux Resources]
  Powered by Linux