Hello,
I am using a vanilla 2.6.22.1 kernel and I see the same kind of
problem as had been mentioned some time back on this list
http://lkml.org/lkml/2007/5/22/45
The issue is essentially that with the MD5 option enabled for the
specific TCP connection, the SYN and SYN-ACKS are passed fine and the
connection establishes fine, but the other end (a cisco router)
complains about incorrect MD5 signatures on any other message that is
sent after this.
Setting the scatter-gather offloading option on the NIC seems to
correct this problem. Recently I had seen a checkin (as a response to
the problem mentioned in the above link) where the TSO option was
turned off to make MD5 work (my kernel has that fix). Is a similar
solution needed here too?
This is the information about my system:
uname -a
Linux stdalone 2.6.22.1 #1 SMP Mon Jul 23 20:15:21 PDT 2007 i686 i686
i386 GNU/Linux
ethtool -i eth0
driver: e1000
version: 7.3.20-k2
firmware-version: N/A
bus-info: 0000:01:0a.0
ethtool -k eth0
Offload parameters for eth0:
rx-checksumming: on
tx-checksumming: on
scatter-gather: off
tcp segmentation offload: off
Thanks for your help.
Siddharth
PS: I would like to be CC'ed on the reply to this email. Thanks.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
