Re: libata and legacy ide pcmcia failure

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Tejun Heo wrote:

Jun  7 21:10:29 localhost kernel: ata3.00: CFA: Memory Card Adapter,
20011212, max PIO1
Jun  7 21:10:29 localhost kernel: ata3.00: 253696 sectors, multi 0: LBA
Jun  7 21:10:29 localhost kernel: ata3.00: issuing IDENTIFY
Jun  7 21:10:29 localhost kernel: ata3.00: IDENTIFY complete
Jun  7 21:10:29 localhost kernel: ata3.00: configured for PIO0
Jun  7 21:10:29 localhost kernel: ata3: EH complete
Jun 7 21:10:29 localhost kernel: scsi 3:0:0:0: Direct-Access ATA Memory Card Adap 2001 PQ: 0 ANSI: 5
Jun  7 21:10:29 localhost kernel: sd 3:0:0:0: [sdd] 253696 512-byte
hardware sectors (130 MB)
Jun  7 21:10:29 localhost kernel: sd 3:0:0:0: [sdd] Write Protect is off
Jun  7 21:10:29 localhost kernel: sd 3:0:0:0: [sdd] Write cache:
disabled, read cache: enabled, doesn't support DPO or FUA
Jun  7 21:10:29 localhost kernel: sd 3:0:0:0: [sdd] 253696 512-byte
hardware sectors (130 MB)
Jun  7 21:10:29 localhost kernel: sd 3:0:0:0: [sdd] Write Protect is off
Jun  7 21:10:29 localhost kernel: sd 3:0:0:0: [sdd] Write cache:
disabled, read cache: enabled, doesn't support DPO or FUA

So, that made it go through detection okay.  That's a good news.

Jun  7 21:10:59 localhost kernel:  sdd:<3>ata3.00: exception Emask 0x0
SAct 0x0 SErr 0x0 action 0x2 frozen
Jun  7 21:10:59 localhost kernel: ata3.00: cmd
20/00:08:00:00:00/00:00:00:00:00/e0 tag 0 cdb 0x0 data 4096 in
Jun  7 21:10:59 localhost kernel:          res
40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)

But, read for partition table failed miserably and took the device
offline completely.

Whee... Cc'ing linux-ide and Mark Lord.  The original thread is..

  http://thread.gmane.org/gmane.linux.kernel/530099

Any ideas?

I still don't see much evidence that interrupts are actually functioning here.
It would be good to see /proc/interrupts before/after libata tries to talk to it.

Let's assume for the moment that interrupts are b0rken.
The legacy IDE driver can talk to such devices completely without interrupts,
if the IDE polling patch (below) is applied.

So, Robert:  could you try again with the old IDE driver,
except apply this patch to it first?  This will give valuable info.


--- old/drivers/ide/ide-probe.c	2007-04-11 00:18:51.000000000 -0400
+++ linux/drivers/ide/ide-probe.c	2007-04-12 09:26:14.000000000 -0400
@@ -1014,6 +1014,27 @@
 * but anything else has led to problems on some machines.  We re-enable
 * interrupts as much as we can safely do in most places.
 */
+struct timer_list polling_timer;
+static void ide_polling (unsigned long data)
+{
+	ide_hwgroup_t *hwgroup = (void *)data;
+	ide_hwif_t *hwif;
+	int irq = 0;
+
+	if (hwgroup) {
+		hwif = hwgroup->hwif;
+		if (hwif)
+			irq = hwif->irq;
+	}
+
+	ide_intr(irq, hwgroup);
+	init_timer(&polling_timer);
+	polling_timer.expires = jiffies + 2;
+	polling_timer.function = &ide_polling;
+	polling_timer.data = (unsigned long) hwgroup;
+	add_timer(&polling_timer);
+}
+
static int init_irq (ide_hwif_t *hwif)
{
	unsigned int index;
@@ -1110,9 +1131,12 @@
		if (hwif->io_ports[IDE_CONTROL_OFFSET])
			/* clear nIEN */
			hwif->OUTB(0x08, hwif->io_ports[IDE_CONTROL_OFFSET]);
-
+#if 0
		if (request_irq(hwif->irq,&ide_intr,sa,hwif->name,hwgroup))
	       		goto out_unlink;
+#else
+		ide_polling((unsigned long)hwgroup);
+#endif
	}

	/*
@@ -1156,6 +1180,7 @@
	printk("\n");
	up(&ide_cfg_sem);
	return 0;
+#if 0
out_unlink:
	spin_lock_irq(&ide_lock);
	if (hwif->next == hwif) {
@@ -1176,6 +1201,7 @@
		BUG_ON(hwgroup->hwif == hwif);
	}
	spin_unlock_irq(&ide_lock);
+#endif
out_up:
	up(&ide_cfg_sem);
	return 1;
--- old/drivers/ide/ide.c	2007-04-11 00:18:51.000000000 -0400
+++ linux/drivers/ide/ide.c	2007-04-12 09:31:59.000000000 -0400
@@ -569,6 +569,8 @@
 *	This is raving bonkers.
 */

+extern struct timer_list polling_timer;
+
void ide_unregister(unsigned int index)
{
	ide_drive_t *drive;
@@ -612,7 +614,11 @@
		g = g->next;
	} while (g != hwgroup->hwif);
	if (irq_count == 1)
+#if 0
		free_irq(hwif->irq, hwgroup);
+#else
+		del_timer(&polling_timer);
+#endif

	spin_lock_irq(&ide_lock);
	/*
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[Index of Archives]     [Kernel Newbies]     [Netfilter]     [Bugtraq]     [Photo]     [Stuff]     [Gimp]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Video 4 Linux]     [Linux for the blind]     [Linux Resources]
  Powered by Linux